
1 / 3 · Click to enlarge
AI Summary
This 4-pin 30A power relay lets a low-voltage signal, such as from an Arduino, switch high-current devices. Its compact 31.6mm body and 5V DC coil make it easy to integrate into automation and control projects.
Key Highlights
- 4-pin configuration for straightforward wiring in relay circuits
- 30A switching capacity for controlling high-current loads
- 5V DC coil compatible with common microcontroller logic levels
- Compact 31.6mm length and 24g weight for space-limited builds
- Operates from -25°C to 70°C in 45% to 85% relative humidity
Ideal For
- Electronics hobbyists building Arduino-based control projects
- Makers designing home automation or smart switch prototypes
- Robotics enthusiasts needing to switch high-current loads
- Automotive DIYers adding relay-controlled accessories
- Students learning about relays and microcontroller interfacing
Buying Tip
Confirm that your project's load current and voltage are within the relay's 30A contact rating and that your control circuit can supply the 5V coil current, adding a driver transistor if needed.
Elecvora expert review
Our verdict
The SLA-05VDC-SL-A is a solid choice for makers who need a compact, high-current relay that works with 5V logic. It offers a practical balance of switching capacity and size for a wide range of DIY electronics projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 30A contact rating handles demanding loads
- 5V coil is compatible with common microcontrollers
- Compact and lightweight for tight spaces
- Wide operating temperature range
Cons
- Coil current may require a driver stage for some microcontrollers
- No datasheet or wiring diagram included
- Package contents not specified
Best for
DIY automation and robotics projects needing a 5V-controlled high-current switch
Not ideal for
Applications requiring certified safety ratings or precise low-level signal switching
Specifications
| Manufacturer | Generic |
|---|---|
| Operating Temperature (°C) | -25 to 70 |
| Opt. Relative Humidity(RH) | 45% ~ 85% |
| Storage Temperature (°C) | -25 to 70 |
| Length (mm) | 31.6 |
| Width (mm) | 26.85 |
| Weight (g) | 24 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Frequently Asked Questions
What is the coil voltage of this relay?
Can I drive this relay directly from an Arduino?
What is the maximum load current?
What is included in the package?
What are the operating temperature limits?
How do I wire the 4 pins?
Overview
The SLA-05VDC-SL-A is a 4-pin power relay built to interface low-voltage control electronics with higher-power loads. It uses a 5V DC coil, which means it can be driven by a small signal from a microcontroller such as an Arduino, allowing your logic circuit to switch devices that draw up to 30A. This makes it a useful building block for automation, robotics and custom control panels.
With a body length of 31.6mm, width of 26.85mm and weight of just 24g, the relay is compact enough for dense PCB layouts and small enclosures. It is rated for operation between -25°C and 70°C and for relative humidity from 45% to 85%, so it can handle typical indoor and sheltered environments without issue.
Key Features
- 4-pin layout: clear coil and contact terminals for straightforward integration.
- 30A switching capability: suitable for controlling demanding loads in projects.
- 5V DC coil: matches common logic-level outputs from microcontrollers.
- Compact dimensions: 31.6mm length and 26.85mm width save valuable space.
- Lightweight: at 24g, it adds minimal bulk to your build.
- Wide operating range: functions from -25°C to 70°C and 45% to 85% RH.
Specifications Explained
The 5V DC coil is the control input: when you apply 5V across the coil pins, the relay contacts close (or open, depending on wiring), allowing current to flow through the load circuit. This voltage is compatible with many microcontroller boards and logic systems, so you can drive the relay directly from a digital output, although a transistor driver is often recommended for reliable operation.
The 30A rating refers to the maximum current the contacts are intended to handle. This is substantially higher than typical small-signal relays and opens up possibilities for switching motors, heaters, lights and other power-hungry devices. Always respect the rating and consider derating for continuous loads or inductive devices.
Operating temperature from -25°C to 70°C and relative humidity of 45% to 85% define the environmental envelope. These figures cover most indoor applications and many outdoor installations where the relay is protected from direct moisture. Storage temperature is the same range, so the relay can be stored alongside other electronics without special precautions.
Compatibility and Requirements
The relay requires a 5V DC control signal to energise the coil. It is compatible with microcontrollers and development boards that provide 5V logic outputs, such as Arduino and similar platforms. Note that the coil itself draws current, so check that your control source can supply enough current, or use a driver stage. The contacts are independent of the coil and can switch loads up to 30A, but the load voltage and type are not specified in the product data; ensure your application stays within safe limits. No additional components are included, so you will need wiring, a breadboard or PCB, and a suitable power source for your load.
Typical Uses
- Switching high-power lights or appliances in home automation prototypes.
- Controlling motors, pumps or solenoids in robotics and RC projects.
- Automotive electrical modifications where a low-voltage signal controls a larger load.
- DIY power distribution boards and test fixtures.
- Educational projects demonstrating relay operation and microcontroller interfacing.
What's in the Box
Package contents are not specified for this product. Please check the listing details or contact us before ordering if you need to confirm what is included.
Quick specs
- Manufacturer
- Generic
- Operating Temperature (°C)
- -25 to 70
- Opt. Relative Humidity(RH)
- 45% ~ 85%
- Storage Temperature (°C)
- -25 to 70
- Length (mm)
- 31.6
- Width (mm)
- 26.85













