Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 4-pin power relay with a 9V DC coil drawing about 0.093A, rated to switch loads up to 30A. It lets a small control signal operate heavier equipment in DIY and repair projects.

Key Highlights

  • 9V DC coil operating voltage for low-power control circuits
  • 30A contact rating suits heavier loads such as motors and heaters
  • 4-pin layout fits common relay boards and sockets
  • Compact 26.85 x 31mm body weighing just 24g
  • Works across -25 to 70C with 45% to 85% relative humidity
  • Low 0.093A supply current keeps coil demand modest

Ideal For

  • Makers building relay-driven automation projects
  • Electronics hobbyists working with 9V DC control circuits
  • Repair technicians replacing a failed power relay
  • Workshops maintaining appliance and lighting control gear
  • DIY builders switching motors, pumps or heaters

Buying Tip

Confirm your control circuit can supply 9V DC at about 0.093A to the coil before ordering, and check that your load stays within the 30A contact rating.

Elecvora expert review

Our verdict

A straightforward 9V DC coil relay rated for 30A contacts, well suited to builders who need a compact switching component. It is a bare part, so it rewards users who already understand relay wiring and load ratings.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear 9V DC coil specification with modest 0.093A draw
  • 30A contact rating covers a wide range of heavier loads
  • Compact 26.85 x 31mm body and light 24g weight
  • Defined -25 to 70C operating and storage range

Cons

  • No socket, driver board or wiring included
  • No datasheet-level contact voltage or lifecycle figures provided
  • Requires care with high-current wiring and insulation

Best for

DIY and repair projects needing a 9V DC coil relay with 30A contacts

Not ideal for

Plug-and-play users who want a complete relay module with drivers

Specifications

ManufacturerGeneric
Operating Voltage (VDC)9
Supply Current0.093 A
Operating Temperature (°C)-25 to 70
Opt. Relative Humidity(RH)45% ~ 85%
Storage Temperature (°C)-25 to 70
Length (mm)26.85
Width (mm)31
Weight (g)24
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x SLA-09VDC-SL-A 4Pin 30A Power Relay

Frequently Asked Questions

What voltage does the coil need?
The coil operates at 9V DC and draws approximately 0.093A. Supply it with a stable 9V DC source and a driver capable of that current.
Can this relay handle 30A?
The contacts are rated for 30A, so the relay is intended for heavier loads. Make sure your wiring, terminals and enclosure are also rated for the current you switch.
Does it work with a microcontroller directly?
A microcontroller pin cannot supply the coil current on its own, so a driver stage is needed. No specific microcontroller compatibility is stated for this part.
Is a socket or wiring included?
No. The package contains only the relay itself, so you will need to supply any socket, driver board or wiring separately.
What are the temperature and humidity limits?
Operating and storage are both specified from -25 to 70C, with relative humidity of 45% to 85%. Keep the relay inside these conditions.
How should I store spare relays?
Store them within -25 to 70C and 45% to 85% relative humidity, away from condensation and extreme heat.

Overview

The SLA-09VDC-SL-A is a 4-pin power relay designed to bridge the gap between low-power control electronics and higher-current loads. A 9V DC coil actuates the contacts, drawing about 0.093A, while the contact set is rated for up to 30A. That combination makes it a useful building block when a small signal needs to switch something considerably more demanding.

Physically, the relay measures roughly 26.85mm in length and 31mm in width, and weighs 24g. The four-pin footprint is familiar to anyone who has worked with relay modules or socket-mounted relays, so it slots into many existing layouts without rework.

Key Features

  • 9V DC coil: a defined operating voltage that pairs with control circuits supplying 9V DC.
  • 30A switching capacity: suitable for loads well beyond what a microcontroller pin can handle directly.
  • 4-pin configuration: a standard arrangement for coil and contact connections.
  • Compact dimensions: 26.85mm by 31mm keeps the part easy to place in tight builds.
  • Wide temperature window: rated from -25 to 70C for operation and storage.
  • Humidity tolerance: specified for 45% to 85% relative humidity.

Specifications Explained

The 9V DC operating voltage tells you what the coil needs. Feed it the correct DC voltage and the relay will change state; the coil current of 0.093A is low enough that many driver circuits can handle it, though you should still confirm your driver can supply that current at 9V.

The 30A figure describes the contact rating, not the coil. It means the relay is intended for circuits where the switched load can be substantial. Always respect the voltage and current limits of your specific application and use appropriate wiring, insulation and enclosures.

Temperature and humidity ratings matter for enclosures and outdoor-adjacent installations. Staying within -25 to 70C and 45% to 85% RH keeps the relay inside its specified operating envelope. Storage follows the same temperature range, so avoid leaving spares in extreme conditions.

Compatibility and Requirements

This relay requires a 9V DC coil supply and a driver stage capable of delivering around 0.093A. It does not include a driver board, socket or wiring, so plan for those separately. Because the contact rating is 30A, ensure your switched circuit, terminals and cabling are rated for the load you intend to control. No microcontroller model, board or software compatibility is specified for this part.

Typical Uses

Typical applications include DIY automation projects, repair and replacement work, appliance control, lighting switching and small motor or pump circuits where a low-power signal must operate a heavier load. It is also a sensible spare for workshops that service relay-driven equipment.

What's in the Box

One SLA-09VDC-SL-A 4-pin 30A power relay.

Quick specs

Manufacturer
Generic
Operating Voltage (VDC)
9
Supply Current
0.093 A
Operating Temperature (°C)
-25 to 70
Opt. Relative Humidity(RH)
45% ~ 85%
Storage Temperature (°C)
-25 to 70
See all specifications

Explore more