
1 / 3 · Click to enlarge
AI Summary
This soil moisture sensor module uses a corrosion-resistant probe to detect soil water content and provides both analog and digital outputs. Its adjustable sensitivity and 3.3–5V compatibility make it easy to integrate into automated gardening or irrigation projects.
Key Highlights
- Corrosion-resistant metal probe for long-term use
- Works with 3.3V to 5V power supplies
- Low current draw of approximately 15 mA
- Analog and digital outputs for flexible integration
- Onboard potentiometer for sensitivity adjustment
- Compact 32 mm × 32 mm board, weighs only 24 g
Ideal For
- Arduino and Raspberry Pi hobbyists
- Smart gardening enthusiasts
- Greenhouse and indoor plant growers
- DIY irrigation system builders
- Agricultural technology students
Buying Tip
Remember that the probe is not waterproof above the metal portion, so avoid submerging the board or exposing it to heavy rain.
Elecvora expert review
Our verdict
This soil moisture module offers a practical and affordable way to add moisture sensing to your projects. Its corrosion-resistant probe and dual outputs make it versatile for both beginners and experienced makers.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Corrosion-resistant probe extends lifespan
- Low power consumption for battery operation
- Adjustable digital threshold via potentiometer
- Compact and lightweight design
Cons
- Probe is not waterproof above the metal part
- No cable included; requires jumper wires
- Analog output may require calibration for accurate readings
Best for
DIY gardeners and microcontroller enthusiasts
Not ideal for
Outdoor applications without additional weatherproofing
Specifications
| Item Type | Soil Moisture Sensor |
|---|---|
| Voltage Rating | 3.3 to 5 |
| Material | Corrosion-Resistant Metal Probe |
| Working Current (mA) | 15 |
| Length (mm) | 32 |
| Width (mm) | 32 |
| Weight (g) | 24 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 9 × 4 × 3 cm |
What's in the box
- 1 x Soil Moisture Module with corrosion-resistant probe
Frequently Asked Questions
What is the operating voltage of this module?
Does it provide both analog and digital outputs?
Is the probe waterproof?
Can I connect it directly to an Arduino?
What is included in the package?
How do I adjust the sensitivity?
Overview
The Generic Soil Moisture Sensor Module is a compact and reliable solution for detecting soil water content. It features a corrosion-resistant metal probe that resists rust and degradation, ensuring consistent readings over time. The module operates from 3.3 to 5 volts and consumes only about 15 mA, making it suitable for battery-powered or low-energy applications. With both analog and digital outputs, you can easily connect it to microcontrollers or standalone circuits. The onboard potentiometer allows you to set the digital output trigger threshold, so the module can activate pumps, alarms, or other devices when soil becomes too dry. Its small footprint (32 mm by 32 mm) and lightweight design (24 g) make it easy to install in tight spaces.
Key Features
- Corrosion-resistant probe: The metal probe is treated to resist corrosion, extending the sensor's lifespan even in damp soil.
- Dual output modes: Provides both analog voltage proportional to moisture and a digital high/low signal based on the adjustable threshold.
- Adjustable sensitivity: A built-in potentiometer lets you fine-tune the digital output switching point for your specific soil type.
- Wide voltage compatibility: Accepts 3.3V to 5V, making it compatible with most common microcontrollers and development boards.
- Low power consumption: Draws only 15 mA, ideal for continuous monitoring in remote or battery-operated systems.
- Compact and lightweight: The 32 mm × 32 mm board and 24 g weight allow for easy integration without adding bulk.
Specifications Explained
Voltage Rating (3.3 to 5V): This range covers the typical operating voltages of popular microcontrollers like Arduino and Raspberry Pi, so you can power the module directly from your board.
Working Current (15 mA): The low current draw means the sensor can run for extended periods on small batteries or solar power without significant drain.
Probe Material (Corrosion-Resistant Metal): The probe is designed to withstand repeated exposure to moist soil, reducing the need for frequent replacement compared to standard probes.
Dimensions (32 mm × 32 mm) and Weight (24 g): The compact board size and light weight make it easy to mount in plant pots, garden beds, or custom enclosures.
Compatibility and Requirements
The module requires a power supply between 3.3V and 5V DC and provides both analog and digital outputs. It can be connected to any microcontroller or ADC that accepts these voltage levels. No additional components are required for basic operation, though you may need jumper wires and a breadboard for prototyping. The probe is inserted directly into soil.
Typical Uses
- Automated plant watering systems that trigger a pump when soil is dry.
- Soil moisture monitoring in greenhouses or gardens.
- Educational projects and Arduino-based experiments.
- Smart agriculture prototypes and DIY IoT devices.
- Low-power remote sensing stations.
What's in the Box
- 1 x Soil Moisture Module with corrosion-resistant probe
Quick specs
- Item Type
- Soil Moisture Sensor
- Voltage Rating
- 3.3 to 5
- Material
- Corrosion-Resistant Metal Probe
- Working Current (mA)
- 15
- Length (mm)
- 32
- Width (mm)
- 32













