
1 / 3 · Click to enlarge
AI Summary
A soil moisture sensor module with a waterproof 1.3-metre probe cable that outputs both analog and digital signals. The onboard potentiometer lets you set the moisture threshold for automatic watering or alert projects.
Key Highlights
- Waterproof corrosion-resistant probe on a 1.3-metre cable
- Analog AO and digital DO outputs from one module
- LM393 comparator for stable threshold switching
- Adjustable sensitivity via onboard potentiometer
- Power and output status LEDs for quick checks
- Runs on 3.3V to 5V DC at about 15mA
Ideal For
- Makers building Arduino or ESP32 plant-monitoring projects
- Gardeners wanting a low-cost automatic watering trigger
- Students learning analog and digital sensor outputs
- Small greenhouse and irrigation automation setups
Buying Tip
Check that your controller has an analog input before relying on the AO pin, and plan to calibrate the potentiometer in your own soil for reliable digital switching.
Elecvora expert review
Our verdict
A straightforward, affordable soil moisture front end that covers both analog measurement and simple threshold switching. The long waterproof probe cable and adjustable comparator make it a practical choice for hobby irrigation and monitoring builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Both analog and digital outputs on one board
- 1.3-metre cable keeps electronics away from wet soil
- Adjustable threshold with visible status LEDs
- Wide 3.3V to 5V supply range
- Compact PCB fits small enclosures
Cons
- No analog input on Raspberry Pi without an external ADC
- Requires calibration for reliable digital switching
- Probe durability depends on soil conditions over time
Best for
Hobbyists and gardeners building plant-monitoring or watering automation projects
Not ideal for
Users needing a calibrated, laboratory-grade moisture measurement instrument
Specifications
| Shipping Weight | 0.0300 kg |
|---|---|
| Shipping Dimensions | 14 × 10 × 05 cm |
What's in the box
- 1 x Soil Moisture Sensor Detector Module Soil Moisture Humidity Test Sensor with 1.3M Cable
Frequently Asked Questions
What is the difference between the AO and DO outputs?
Which controllers can I use with this module?
What voltage does the module need?
How do I adjust the moisture threshold?
What is included with the sensor?
How should I care for the probe?
Overview
This soil moisture detector module is a compact sensing board built around an LM393 voltage comparator, paired with a waterproof, corrosion-resistant probe mounted on a 1.3-metre cable. The probe sits in the soil while the small PCB stays dry and accessible, which makes the module practical for garden beds, planters and irrigation setups. It measures the water content of the surrounding soil and presents the result in two ways: a continuous analog voltage and a simple digital high/low state.
Key Features
- Dual outputs: analog (AO) for reading moisture levels and digital (DO) for threshold events.
- Adjustable threshold: a preset potentiometer sets the point at which the digital output changes state.
- Status LEDs: separate power and output indicators make wiring checks and tuning easier.
- Long probe cable: the 1.3-metre lead gives flexibility when positioning the board away from moisture.
- Corrosion-resistant probe: gold-plated electrodes are designed to hold up in soil applications.
- 4-pin interface: VCC, GND, AO and DO pins keep connection to a controller straightforward.
Specifications Explained
The module accepts 3.3V to 5V DC and draws roughly 15mA, so it can share the logic supply of most hobby controllers. Both the analog and digital outputs swing across 0V to 5V, giving a wide readable range on the analog pin and a clean logic level on the digital pin. The LM393 comparator handles the digital side, comparing the probe signal against the level you set with the potentiometer. The PCB measures about 3.2cm x 1.4cm, small enough to tuck into an enclosure or project box.
Compatibility and Requirements
The 4-pin layout (VCC, GND, AO, DO) works with development boards that provide a 3.3V or 5V supply and an analog input, including Arduino, ESP32, ESP8266, Raspberry Pi and similar controllers. You will need jumper wires or a header connection to link the module to your board. Note that Raspberry Pi boards do not include a native analog input, so an external ADC is needed if you want to read the AO signal.
Typical Uses
- Smart irrigation and automatic watering triggers
- Garden and greenhouse soil monitoring
- Agricultural sensing and data logging projects
- DIY electronics and microcontroller learning
- Plant care reminders and dry-soil alerts
What's in the Box
1 x Soil Moisture Sensor Detector Module Soil Moisture Humidity Test Sensor with 1.3M Cable.













