
1 / 7 · Click to enlarge
AI Summary
A compact in-line smart switch that controls lights and appliances over WiFi through the eWeLink app, with a built-in 433MHz RF receiver for use with a matching remote controller. It switches up to 10A and 2200W from a 90-250V AC supply and supports Siri, Alexa and Google voice commands.
Key Highlights
- WiFi 802.11 b/g/n plus 433MHz RF receiver in one module
- 10A maximum current and 2200W maximum load at 90-250V AC
- App control through eWeLink from anywhere with internet access
- Works with Siri, Alexa and Google voice assistants
- Fire-retardant ABS V0 enclosure for the switch body
- Slim 88 x 38mm housing fits narrow wall boxes
Ideal For
- DIY smart-home installers adding app control to existing lights
- Households that want a physical RF remote as well as phone control
- Users already running Siri, Alexa or Google voice assistants
- Makers and tinkerers automating fans, pumps and small appliances
- Anyone upgrading a single circuit without replacing the fixture
Buying Tip
Confirm your appliance stays under both the 10A and 2200W limits and that your WiFi is 2.4GHz, and remember a compatible 433MHz remote controller is needed for handset operation and is not included.
Elecvora expert review
Our verdict
The RFR2 is a sensible pick for anyone who wants app and voice control but does not want to rely on a phone alone, since the 433MHz receiver adds a simple hardware remote path. Its 10A and 2200W ceiling is generous for lighting and light appliance duty, provided the load stays within the stated limits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- WiFi and 433MHz RF control in one compact module
- Clear 10A and 2200W load ratings
- Voice control with Siri, Alexa and Google
- Slim 88 x 38mm body fits tight spaces
- Fire-retardant ABS V0 housing
Cons
- Compatible 433MHz remote controller is not included
- Mains wiring requires electrical competence
- Indoor operating range of 0 to 40 degrees Celsius only
Best for
Single-circuit lighting and light appliance control with app, voice and remote options
Not ideal for
High-power appliances or outdoor installations without suitable protection
Specifications
| Item Type | Other Switches |
|---|---|
| Switch Type | Smart Switch |
| Voltage Rating (V) | 90 to 250 |
| Voltage Rating | 90 to 250V AC |
| Max Current (A) | 10 |
| Max. Power (W) | 2200 |
| Gang/Channel | 1 |
| Wireless Standard | 802.11 b/g/n & 433MHz RF |
| Enclosure Material | Fire-retardant ABS V0 |
| Operating Temperature (°C) | 0 to 40 |
| Opt. Relative Humidity(RH) | 5% ~ 90% |
| Color | White |
| Length (mm) | 88 |
| Width (mm) | 38 |
| Weight (g) | 52 |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 9 × 4 × 2 cm |
What's in the box
- 1 x Sonoff RFR2 Smart Home WiFi Mobile Remote Control Switch
- 1 x User Manual
Frequently Asked Questions
Can I control the RFR2 without WiFi?
What load can it switch?
Does it work with Alexa, Google and Siri?
Is the RF remote included?
Where can it be installed?
What is the enclosure made of?
Overview
The Sonoff RFR2 is a single-channel smart switch designed to sit inline between your mains supply and the appliance you want to control. It connects to a 2.4GHz WiFi network and reports to the eWeLink app, so you can switch connected loads on or off from a phone, and it also carries a 433MHz RF receiver for use with a compatible RF remote controller. That combination makes it a practical choice where you want app convenience but still prefer a physical remote for everyday use.
Key Features
- Dual control paths: WiFi control through eWeLink plus 433MHz RF reception for a matching remote controller.
- Voice assistant support: on/off commands via Siri, Alexa and Google voice control.
- 10A switching capacity: rated for 90-250V AC and up to 2200W, suitable for common household loads within those limits.
- Compact housing: 88mm long and 38mm wide, with a 52g switch body.
- Flame-retardant enclosure: ABS V0 material for the switch housing.
Specifications Explained
The 90-250V AC voltage range means the switch is built for standard mains supplies rather than low-voltage DC circuits. The 10A current limit and 2200W maximum power define the load ceiling: keep the appliance within both figures, and remember that devices with high inrush currents or continuous heavy draw may need a different solution. Single-gang means one channel, so one connected circuit is switched per unit.
The wireless section covers 802.11 b/g/n WiFi for network control and 433MHz RF for remote handset operation. The RF link is a separate radio path from WiFi, so a compatible remote can operate the switch without the app. Operating temperature is rated from 0 to 40 degrees Celsius at 5% to 90% relative humidity, which describes normal indoor conditions.
Compatibility and Requirements
Control requires the eWeLink app and a 2.4GHz WiFi network. Voice control needs a Siri, Alexa or Google voice assistant device already set up in the home. RF remote operation requires a compatible 433MHz remote controller, which is not included. Installation involves mains wiring, so the unit should be fitted by someone competent to work safely with AC power.
Typical Uses
Common applications include ceiling and table lights, fans, pumps, small heaters within the power limit, and seasonal lighting such as Christmas tree lights. The slim body suits wall boxes and junction enclosures where space is limited.
What's in the Box
- 1 x Sonoff RFR2 smart WiFi remote control switch
- 1 x User manual
Quick specs
- Item Type
- Other Switches
- Switch Type
- Smart Switch
- Voltage Rating (V)
- 90 to 250
- Voltage Rating
- 90 to 250V AC
- Max Current (A)
- 10
- Max. Power (W)
- 2200



















