
1 / 3 · Click to enlarge
AI Summary
The Stanley FMHT0-96230 automatic wire stripper self-adjusts to wire diameters from 0.2 to 6 mm² and includes crimping, an adjustable wire stop, and spring return. It speeds up repetitive stripping while helping keep strip lengths consistent from 6 to 18 mm.
Key Highlights
- Self-adjusting jaws strip wire from 0.2 to 6 mm² without manual sizing
- Adjustable wire stop supports consistent strip lengths from 6 to 18 mm
- Built-in crimping function handles various terminal types
- Spring return speeds up repetitive stripping and cutting tasks
- Robust steel body with non-slip bi-material handles for control
- Fine adjustment for jaw pressure helps match different insulation
Ideal For
- Electricians preparing control and panel wiring
- Electronics technicians working with mixed wire sizes
- Appliance and equipment repair technicians
- Automotive low-voltage installers
- DIYers building or repairing low-voltage projects
Buying Tip
Check your most common wire sizes against the 0.2 to 6 mm² automatic range and the 6 to 18 mm strip-length range before buying, especially if you regularly work with larger cable.
Elecvora expert review
Our verdict
The Stanley FMHT0-96230 is a practical automatic stripper for mixed-size copper and aluminium work, with crimping and a wire stop adding useful versatility. It suits technicians who value repeatability over specialist single-purpose tools.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Automatic jaw adjustment across 0.2 to 6 mm² saves setup time
- Adjustable wire stop and jaw pressure support consistent results
- Crimping function reduces the number of tools needed
- Spring return and non-slip handles help during repetitive work
Cons
- Not intended for wire sizes outside the stated automatic range
- Crimping capability is limited to compatible terminals
- Requires manual adjustment for different strip lengths
Best for
Electricians and technicians stripping mixed wire sizes with repeatable lengths
Not ideal for
Heavy-duty stripping of large cables beyond the rated ranges
Specifications
| Item Type | Wire Stripper and Cutter |
|---|---|
| Length (mm) | 250 |
| Shipping Weight | 0.35 kg |
| Shipping Dimensions | 28 × 13 × 5 cm |
What's in the box
- 1 x Stanley Automatic Wire Stripper, FMHT0-96230
Frequently Asked Questions
What wire sizes can this stripper handle?
Does it need a battery or power supply?
Can it crimp terminals as well as strip wire?
What strip lengths can I set?
What is included in the package?
How should I care for the tool?
Overview
The Stanley FMHT0-96230 is a 250 mm automatic wire stripper and cutter for copper or aluminium cables. Instead of setting a fixed notch, the jaws close automatically to match the conductor diameter, covering 0.2 to 6 mm². That makes it useful when a job mixes several wire sizes and you want to keep moving without swapping tools. An adjustable wire stop and fine jaw-pressure adjustment help you repeat the same strip length, from 6 to 18 mm, across a run of connections.
Key Features
- Automatic jaw adjustment: the tool adapts to wire diameter from 0.2 to 6 mm², reducing setup between different cables.
- Adjustable wire stop: set a consistent strip length between 6 and 18 mm for repeatable terminations.
- Crimping capability: the tool can crimp various terminals, so one hand tool covers stripping and termination.
- Spring return: the handles reopen automatically, which helps during long stripping sessions.
- Steel body and bi-material handles: a robust build with non-slip grips for controlled handling.
Specifications Explained
The 250 mm length gives reasonable reach and leverage for bench and panel work. The 0.2 to 6 mm² automatic range covers common control, signal, and small power conductors; the tool is also rated for copper or aluminium cable up to 10 mm² for multiple cables and up to 6 mm² for single cables. The 6 to 18 mm strip-length range suits most terminal and connector preparation. Fine jaw-pressure adjustment lets you adapt to different insulation types without changing the tool.
Compatibility and Requirements
The stripper is intended for copper or aluminium cables within the stated ranges. It is a hand tool and needs no power source. Use it within the 0.2 to 6 mm² automatic range and the cable ratings above; for other sizes or materials, check that the tool is suitable before use.
Typical Uses
Electricians and panel builders can use it for control wiring and terminal preparation. It also suits appliance repair, automotive low-voltage work, and general electronics projects where wire sizes change often. The crimping function is handy when terminating ferrules or similar connectors during the same task.
What's in the Box
1 x Stanley Automatic Wire Stripper, FMHT0-96230.
Quick specs
- Item Type
- Wire Stripper and Cutter
- Length (mm)
- 250
- Shipping Weight
- 0.35 kg
- Shipping Dimensions
- 28 × 13 × 5 cm



















