Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type HAT; compatibility Pi Zero, Pi 4B, Pi 3B+; hat type Shield HAT. Check that your power source supplies 5 ~ 12 before connecting it.

Key Highlights

  • Item Type: HAT
  • Compatibility: Pi Zero, Pi 4B, Pi 3B+
  • HAT Type: Shield HAT

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeHAT
CompatibilityPi Zero, Pi 4B, Pi 3B+
HAT TypeShield HAT
Operating Voltage (VDC)5 ~ 12
CommunicationI2C
Servo Motor Interface0, 1,14,15
DC Motor InterfaceM1,M2,M3,M4
Stepper Motor InterfaceM1-M2 and M3-M4
Operating Temperature (°C)-20℃~85℃
Operating humidity5%~95%
Length (mm)65
Width (mm)56
Weight (g)27
Shipping Weight0.03 kg
Shipping Dimensions7 × 6 × 2 cm

Overview

The Stepper Motor HAT V2.0 Shield for Raspberry Pi Zero/3B+/4B is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: HAT
  • Compatibility: Pi Zero, Pi 4B, Pi 3B+
  • HAT Type: Shield HAT
  • Operating Voltage (VDC): 5 ~ 12 (match this to your power supply; too high a voltage can damage the part)
  • Communication: I2C
  • Servo Motor Interface: 0, 1,14,15 (confirm your cable or board uses the same connector)
  • DC Motor Interface: M1,M2,M3,M4 (confirm your cable or board uses the same connector)
  • Stepper Motor Interface: M1-M2 and M3-M4 (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Stepper Motor HAT V2.0 is a full-featured robotic shield that supports multiple servo motor/DC motor/stepper motors simultaneously. It can be multi-layer cascading to expand more control interfaces, especially suitable for players DIY robots, smart cars, robotic arms, intelligent heads, and so on.
Application:
  1.  Robotics
  2. Mechanical Arm
  3. Smart Car
  4. Intelligent Control
  5. Steering Gear Control

Features:

  1. Support 2CH IIC Communication Interface.
  2. 1CH I2C compatible with 5V for other controllers.
  3. 4Bit Programmable address support 16pcs in series.
  4. Support 16bit PWM output.
  5. 12Bit Resolution.
  6. PWM maximum frequency 50KHz.
  7. Support 4CH servo motor 3P interface.
  8. Support 4CH DC 6V-12V DC motor.
  9. Support 2CH DC 6V-12V stepper motor.
  10. Support Raspberry Pi 2B/B+/A+

Package Includes:

1 x Stepper Motor HAT V2.0 Shield for Raspberry Pi Zero/3B+/4B

Quick specs

Item Type
HAT
Compatibility
Pi Zero, Pi 4B, Pi 3B+
HAT Type
Shield HAT
Operating Voltage (VDC)
5 ~ 12
Communication
I2C
Servo Motor Interface
0, 1,14,15
See all specifications