Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
SUSWE-12V 6A AC-DC Switching Power Supply Module — image 1
Hover to zoom

1 / 2 · Click to enlarge

SUSWE

SUSWE-12V 6A AC-DC Switching Power Supply Module

23+ bought in past month
AI Summary
AC to DC Power Supply Module for everyday users

The SUSWE-12V 6A AC-DC Switching Power Supply Module by SUSWE is a value-for-money ac to dc power supply module designed for everyday users. It features Shipping Weight: 0.15 kg and Shipping Dimensions: 15 × 10 × 5 cm.

₹889
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹889
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Shipping Weight: 0.15 kg
Shipping Dimensions: 15 × 10 × 5 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-2228154Category: AC to DC Power Supply Module

About This Product

The SUSWE-12V 6A AC-DC Switching Power Supply Module by SUSWE is a value-for-money ac to dc power supply module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Shipping Weight: 0.15 kg
  • Shipping Dimensions: 15 × 10 × 5 cm

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The SUSWE-12V 6A AC-DC Switching Power Supply Module is a reliable and efficient power supply solution designed to convert AC voltage into a stable 12V DC output. With a maximum output current of 6A, this compact module is ideal for powering a wide range of electronic devices, including LED lighting, Arduino projects, and other low to medium power applications.

Note: Actual product may vary in terms of image.


Features:

  1. Wide Input Voltage Range: Accepts input voltages typically from 100V to 240V AC, ensuring compatibility with various power sources.
  2. Compact Design: Space-efficient design makes it suitable for installation in tight spaces or enclosures.
  3. Stable Output: Provides a consistent 12V DC output, essential for sensitive electronics.
  4. High Efficiency: Designed to minimize energy loss, ensuring optimal performance and lower heat generation during operation.
  5. Safety Protections: Equipped with over-voltage, over-current, and short-circuit protection features to enhance safety and reliability.
  6. Versatile Applications: Perfect for a variety of uses, including DIY projects, consumer electronics, and industrial applications.

Specifications:

  1. Input Voltage: 100-240V AC
  2. Input Frequency: 47-63 Hz
  3. Output Voltage: 12V DC
  4. Output Current: 6A
  5. Output Power: 72W
  6. Efficiency: >85% (typical)
  7. Load Regulation: ±5% for output voltage

Package Includes:

1 x SUSWE-12V 6A AC-DC Switching Power Supply Module

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.