Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 433MHz LoRa transceiver module based on the SEMTECH SX1278 chip, offering -148dBm sensitivity and a claimed range of up to 15km. It gives Arduino and IoT projects reliable long-distance, low-power wireless links over a simple SPI connection.

Key Highlights

  • SEMTECH SX1278 transceiver with LoRa spread spectrum modulation
  • 433MHz operating frequency with a claimed communication distance up to 15km
  • High sensitivity down to -148dBm and 127dB RSSI dynamic range
  • Programmable bit rate up to 300Kbps over half-duplex SPI
  • Constant +20dBm RF output with 1.8-3.7V operating voltage
  • Supports LoRa, FSK, GFSK, MSK, GMSK and OOK modulation modes

Ideal For

  • Makers building long-range Arduino telemetry links
  • IoT developers prototyping smart home sensor nodes
  • Engineers designing low-power meter reading systems
  • Students learning LoRa and spread spectrum communication
  • Hobbyists building wireless alarm and remote monitoring projects

Buying Tip

Check that your host board has a free SPI bus and can supply between 1.8V and 3.7V, and plan an antenna and matching library before soldering the module in place.

Elecvora expert review

Our verdict

The Ra-02 SX1278 module packs serious long-range capability into a tiny, low-cost board, with sensitivity and output figures that suit serious IoT prototyping. It is a solid building block for anyone comfortable with SPI wiring and library setup.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very high sensitivity down to -148dBm
  • Claimed range up to 15km with LoRa modulation
  • Wide 1.8-3.7V supply range with constant +20dBm output
  • Compact shielded package with patch antenna

Cons

  • Requires SPI wiring and library setup
  • Only one module is included, so a second unit is needed for a link
  • No onboard USB or level shifting is specified

Best for

Long-range, low-power wireless prototyping with microcontrollers

Not ideal for

Beginners wanting a plug-and-play USB radio

Specifications

Model No. / NameWireless Transmitter Modules
Operating Frequency (MHz)433
Communication Distance(m)15KM
Sensitivity (dBm)down to -148dBm
Programmable bit rateUP to 300Kbps
RSSI dynamic range127dB
Wireless Frequency433MHz
Operating Voltage1.8-3.7v
Shipping Weight0.008 kg
Shipping Dimensions8 × 7 × 1 cm

What's in the box

  • 1 x LoRa Wireless Spread Spectrum Transmission module

Frequently Asked Questions

What is the operating frequency of this module?
It operates at 433MHz, which is the band used for its LoRa spread spectrum communication.
How far can it transmit?
The manufacturer lists a communication distance of up to 15km. Real results depend on antenna, environment and data rate.
What voltage does it need?
It accepts an operating voltage between 1.8V and 3.7V and holds a constant +20dBm RF output.
How does it connect to a microcontroller?
It uses half-duplex SPI communication. For Arduino you also need to install the appropriate library in the Arduino IDE.
Which modulation modes are supported?
It supports LoRa, FSK, GFSK, MSK, GMSK and OOK modulation modes.
What is included in the package?
The package contains one LoRa Wireless Spread Spectrum Transmission module.

Overview

The Ra-02 is a wireless transmission module built on the SEMTECH SX1278 transceiver. It uses LoRa spread spectrum modulation to trade data rate for range and interference resistance, making it a practical choice for long-distance links that do not need high bandwidth. The module is supplied in a small dual-row stamp-hole patch package with a shielded housing and a patch antenna, so it can be soldered directly onto a carrier board or adapter.

Key Features

  • 433MHz operating frequency for long-range spread spectrum communication
  • Sensitivity down to -148dBm with a 127dB RSSI dynamic range
  • Programmable bit rate up to 300Kbps
  • Constant RF power output at +20dBm across voltage changes
  • Half-duplex SPI communication interface
  • Supports LoRa, FSK, GFSK, MSK, GMSK and OOK modulation
  • Automatic RF signal detection, CAD mode and high-speed AFC
  • Packet engine with CRC up to 256 bytes

Specifications Explained

Frequency: the 433MHz band is widely used for short-range devices, and LoRa modulation on this band gives a good balance of range and antenna size.

Sensitivity and RSSI: a sensitivity figure down to -148dBm means the receiver can pick up very weak signals, which is what allows long links at low power. The 127dB RSSI dynamic range helps the receiver cope with both strong nearby signals and faint distant ones.

Data rate: the programmable bit rate reaches 300Kbps. Lower rates generally extend range, while higher rates suit faster, shorter links.

Power: the module accepts 1.8-3.7V and holds a constant +20dBm RF output as the supply varies, which simplifies design around small batteries.

Compatibility and Requirements

The module communicates over half-duplex SPI, so it needs a host microcontroller with an SPI bus. For Arduino projects you will need to install the appropriate library in the Arduino IDE before use. A suitable antenna connection and a stable supply within the 1.8-3.7V range are required. No other compatibility details are specified by the manufacturer.

Typical Uses

Long-range telemetry, smart home nodes, burglar alarm equipment, meter reading systems and other low-power IoT links that need to cover distance while resisting interference.

What's in the Box

  • 1 x LoRa Wireless Spread Spectrum Transmission module

Quick specs

Model No. / Name
Wireless Transmitter Modules
Operating Frequency (MHz)
433
Communication Distance(m)
15KM
Sensitivity (dBm)
down to -148dBm
Programmable bit rate
UP to 300Kbps
RSSI dynamic range
127dB
See all specifications