Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact SX1278 LoRa and FSK/GFSK transceiver module offering up to 5 km range, -139 dBm sensitivity and a standard SPI interface. It is a practical building block for long-distance, low-power embedded wireless links such as meter reading and remote sensing.

Key Highlights

  • Up to 5 km communication range for long-distance wireless links
  • LoRa plus FSK/GFSK modulation for flexible link design
  • Receiver sensitivity up to -139 dBm for weak-signal reception
  • Standard SPI interface simplifies host microcontroller integration
  • Sleep mode and timing wake-up support low-power operation
  • Compact 22.8 × 22.7 × 4.2 mm board weighing about 3 g

Ideal For

  • Embedded developers building long-range sensor links
  • Meter reading and remote data acquisition integrators
  • Industrial monitoring and telemetry projects
  • Smart home and wireless control hobbyists
  • Makers prototyping LoRa and FSK/GFSK links

Buying Tip

Check that your design includes a suitable antenna and an SPI-capable microcontroller, since neither is included with the module.

Elecvora expert review

Our verdict

A practical SX1278 module for developers who want long-range LoRa and FSK/GFSK links in a small package. It rewards careful antenna choice and firmware configuration rather than plug-and-play use.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Up to 5 km stated range with strong -139 dBm sensitivity
  • Supports both LoRa and FSK/GFSK modulation
  • Standard SPI interface for straightforward integration
  • Low receive current with sleep and timing wake-up support

Cons

  • Antenna and host microcontroller are not included
  • Requires firmware configuration before use
  • Range depends on antenna, environment and data rate

Best for

Embedded long-range wireless links and meter reading projects

Not ideal for

Users wanting a ready-to-use plug-and-play radio

Specifications

Shipping Weight0.005 kg
Shipping Dimensions8 × 6 × 1 cm

What's in the box

  • 1 x SX1278 Spread Spectrum Power Meter Reading Module 5km Wireless Transceiver Module
  • 1 x Spring

Frequently Asked Questions

What is this module used for?
It is a wireless transceiver for long-range, low-power links such as meter reading, remote data acquisition, industrial monitoring and smart home control.
Which modulation modes does it support?
The module supports both LoRa and FSK/GFSK modulation over a half-duplex link.
How do I connect it to a microcontroller?
It uses a standard SPI interface, so your host board needs SPI pins and firmware to configure the radio.
Does the package include an antenna?
No. The package contains the module and a spring only, so you need to supply a suitable antenna for your chosen band.
What is the power consumption?
Receive current is specified at 10–12 mA, and sleep mode with timing wake-up helps reduce average consumption.
How large is the module?
The board measures 22.8 × 22.7 × 4.2 mm and weighs about 3 g.

Overview

The SX1278 Spread Spectrum Power Meter Reading Module is a compact wireless transceiver designed for long-range, low-power data links. It supports both LoRa and FSK/GFSK modulation, giving you flexibility when balancing range, data rate and interference immunity. The module is built around a 32 MHz, 10 ppm passive crystal and communicates with a host board over a standard SPI interface.

With receiver sensitivity of up to -139 dBm and a communication range reaching 5 km, this module is aimed at embedded developers and integrators who need reliable links over distance without complex wiring. Its small footprint and light weight make it easy to fit into space-constrained enclosures.

Key Features

  • Long range: communication distance up to 5 km.
  • Dual modulation: LoRa and FSK/GFSK support.
  • High sensitivity: receiver sensitivity up to -139 dBm.
  • Interference resistance: channel rejection ratio of 56 dB.
  • SPI interface: simple connection to embedded systems.
  • Low power: receive current of 10–12 mA, with sleep mode and timing wake-up.
  • Buffering: 256-bit FIFO buffer with FIFO or direct transfer modes.
  • RSSI detection: channel signal strength indication for link assessment.

Specifications Explained

Range and sensitivity

A stated range of up to 5 km is a best-case figure that depends on antenna choice, environment and data rate. The -139 dBm sensitivity figure tells you the module can pick up very weak signals, which is what makes those longer links possible. In practice, start with conservative settings and test your own site.

Modulation and interface

LoRa is well suited to long-range, low-data-rate links, while FSK/GFSK offers a more conventional option. Both are configured through the SPI interface, so your microcontroller firmware controls the radio directly. The 256-bit FIFO buffer helps smooth data handling between the host and the radio.

Power behaviour

Receive current is specified at 10–12 mA. Sleep mode and timing wake-up let you keep the radio idle between transmissions, which matters for battery-oriented designs. The module is half duplex, so it transmits and receives on a shared channel arrangement.

Compatibility and Requirements

The module uses a standard SPI interface and operates in the ISM multi-band. You will need a host microcontroller with SPI, a suitable antenna and a power arrangement for your design. The listed package does not include an antenna or microcontroller board, so confirm your own hardware before assembly.

Typical Uses

  • Wireless meter reading and remote data acquisition
  • Industrial monitoring and sensor links
  • Smart home automation and wireless control
  • Embedded prototypes needing long-distance links

What's in the Box

  • 1 x SX1278 Spread Spectrum Power Meter Reading Module 5km Wireless Transceiver Module
  • 1 x Spring

Quick specs

Shipping Weight
0.005 kg
Shipping Dimensions
8 × 6 × 1 cm
See all specifications