Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 10-pack of 6x6x5mm momentary tactile push button switches with IP65 protection and through-hole pins. Ideal for PCB and breadboard projects needing reliable tactile feedback.

Key Highlights

  • Pack of 10 compact 6x6x5mm tactile switches
  • Momentary action with clear tactile feedback
  • IP65 rated for dust and water resistance
  • 12V rating at up to 50mA
  • Low 30mΩ contact resistance
  • Through-hole design for PCB or breadboard

Ideal For

  • Electronics hobbyists building custom control panels
  • Students learning PCB prototyping
  • Makers designing breadboard circuits
  • Technicians repairing consumer devices
  • Product developers creating test fixtures

Buying Tip

Check that your circuit's voltage and current do not exceed the 12V/50mA rating, and consider soldering rather than breadboard use for permanent installations.

Elecvora expert review

Our verdict

These tactile switches offer reliable momentary action and solid IP65 protection in a compact package. The 10-pack is practical for projects requiring multiple inputs, though the 50mA limit restricts them to signal-level applications.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear tactile feedback
  • IP65 dust and water resistance
  • Low contact resistance
  • Compact 6x6x5mm size
  • Convenient 10-pack

Cons

  • Low current rating (50mA)
  • Requires soldering for permanent use
  • No mounting hardware included

Best for

Low-power signal switching in protected environments

Not ideal for

High-current or mains voltage applications

Specifications

ManufacturerGeneric
Voltage Rating (V)12
Max. Operating Current (A)50mA
Switch TypeMomentary
Contact Resistance (ohm)30mΩ
Insulation Resistance (MOhm)100
Operating Temperature (°C)-30 to 70
Protection StandardIP65
Length (mm)6
Width (mm)6
Weight (g)1 (approx) (each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 10 x 6x6x5mm Tactile Push Button Switches

Frequently Asked Questions

What does momentary mean?
The switch contacts close only while the button is pressed and open when released. It does not latch or stay on.
Can I use these on a breadboard?
Yes, the through-hole pins fit standard solderless breadboards for temporary prototyping.
What is the maximum voltage and current?
The switch is rated for 12V and 50mA maximum. Do not exceed these limits.
Are these switches waterproof?
They carry an IP65 rating, meaning they are protected against dust and water jets, but they should not be submerged.
How many switches are included?
The pack contains ten 6x6x5mm tactile push button switches.
Do I need to solder them?
For permanent PCB installation, soldering is required. For breadboard use, no soldering is needed.

Overview

The 6x6x5mm tactile push button switch is a compact, momentary switch designed for electronic input applications. This pack of ten provides a handy supply for prototyping, repairs, or small production runs. Each switch uses through-hole pins that fit standard PCB layouts and solderless breadboards, making them versatile for both permanent and temporary connections. The round shaft delivers a distinct tactile response when pressed, helping users confirm activation without looking.

Key Features

  • Momentary operation: The circuit closes only while the button is held down, then returns to open when released.
  • IP65 protection: Resists dust ingress and water jets, suitable for moderately exposed environments.
  • Compact size: 6mm length and width with a 5mm height, fitting tight spaces.
  • Reliable contacts: 30mΩ contact resistance and 100MΩ insulation resistance for stable switching.
  • Temperature tolerance: Operates from -30°C to 70°C.

Specifications Explained

Voltage and current: Rated at 12V and 50mA maximum, these switches suit low-power signal and control circuits, not mains or high-current loads. Contact resistance: At 30mΩ, the switch adds minimal resistance, preserving signal integrity in low-voltage applications. Insulation resistance: 100MΩ helps prevent leakage between contacts. IP65: The enclosure is protected against dust and water jets, though it is not intended for submersion. Operating temperature: -30°C to 70°C covers most indoor and sheltered outdoor use.

Compatibility and Requirements

These switches are through-hole components with standard pin spacing for PCB mounting and breadboard use. They require soldering for permanent PCB installation. No additional drivers or components are needed for basic switching. The 12V/50mA rating means they are compatible with common low-voltage DC circuits; ensure your load does not exceed these limits.

Typical Uses

  • Input buttons on custom PCBs and prototypes
  • Breadboard test circuits
  • Consumer electronics control panels
  • Test and instrumentation equipment
  • DIY remote controls and gadgets
  • Educational electronics projects

What's in the Box

Ten 6x6x5mm tactile push button switches.

Quick specs

Manufacturer
Generic
Voltage Rating (V)
12
Max. Operating Current (A)
50mA
Switch Type
Momentary
Contact Resistance (ohm)
30mΩ
Insulation Resistance (MOhm)
100
See all specifications