Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A clear two-piece ABS case that snaps together around a Raspberry Pi 3 or 3+, with a front fan slot, rear ventilation ports and open access to GPIO, HDMI, USB, Ethernet and microSD. Four screws and non-slip silicone gaskets are included for a tidy, stable build.

Key Highlights

  • Two-piece transparent ABS shell clicks together without standoffs or elastic bands
  • Front slot accepts a cooling fan for direct airflow over the board
  • Rear ventilation ports support heat dispersion during long runs
  • Openings for GPIO, camera connector, HDMI, microSD, USB and Ethernet
  • Compact 91 x 62 x 27 mm footprint weighing only 36 g
  • Four screws and four non-slip silicone gaskets supplied

Ideal For

  • Raspberry Pi 3 and 3+ owners who want a clear protective shell
  • Makers building fan-cooled Pi projects
  • Students and classrooms needing low-cost board protection
  • Hobbyists mounting a Pi inside a panel or larger build
  • Users who swap microSD cards often and need quick access

Buying Tip

Confirm your board is a Raspberry Pi 3 or 3+ before ordering, and remember the fan and board are sold separately.

Elecvora expert review

Our verdict

A simple, affordable clear case that does the basics well: it protects the Pi, keeps every important port open and gives you a place to fit a fan. The snap-fit design makes assembly quick, and the included screws and gaskets are a sensible touch at this level.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear ABS shell keeps the board visible
  • Fan slot and rear vents support airflow
  • All main ports and the microSD slot stay accessible
  • Tool-free snap-fit assembly
  • Screws and non-slip gaskets included

Cons

  • Fan and Raspberry Pi board are not included
  • Compatibility limited to Pi 3 and 3+
  • No official thermal or ingress rating stated

Best for

Pi 3 and 3+ owners who want a low-cost clear case with fan support

Not ideal for

Owners of other Raspberry Pi models or builds needing a sealed, weather-resistant enclosure

Specifications

CompatibilityPi 3, Pi 3+
Dimensions (L x W x H) mm91 x 62 x 27
Weight (g)36g
Additional Specs.Cooling FAN Slot: Yes
SD Card SlotYes
ColorTransparent
Shipping Weight0.04 kg
Shipping Dimensions12 × 6 × 4 cm

What's in the box

  • 1 x Transparent ABS case for Raspberry Pi 3/3+
  • 4 x Non-slip silicone gaskets
  • 4 x Screws for fan and board mounting

Frequently Asked Questions

Which Raspberry Pi models does this case fit?
It is designed for the Raspberry Pi 3 and Raspberry Pi 3+ only. Check your board model before ordering.
Is a cooling fan included?
No. The case has a front slot for a fan, but the fan itself is not part of the package.
Do I need tools to close the case?
No. The two halves click together. Screws are supplied for mounting the board and fan, not for closing the shell.
Can I reach the microSD card without opening the case?
Yes. There is a dedicated microSD card slot cutout, so cards can be swapped with the case closed.
What is included in the package?
You get the transparent ABS case, four non-slip silicone gaskets and four screws. The Raspberry Pi board and fan are not included.
How should I clean the case?
Wipe it with a soft, slightly damp cloth and avoid harsh solvents, which can cloud or damage clear ABS plastic.

Overview

This transparent ABS case gives a Raspberry Pi 3 or 3+ a clean, protective shell without hiding the board. The two-piece enclosure is injection moulded in clear plastic and clicks together, so there are no standoffs, elastic bands or complicated assembly steps. Once closed, the Pi stays visible while its main connectors remain reachable through dedicated cutouts.

At 91 x 62 x 27 mm and 36 g, the case adds very little size or weight to a build. It is a practical choice for a desk project, a classroom kit or a Pi that travels between workbenches.

Key Features

  • Snap-fit assembly: the top and bottom sections press together and hold the board in place.
  • Cooling fan slot: a front opening accepts a fan for direct airflow across the board.
  • Ventilation ports: rear openings help warm air escape.
  • Full port access: cutouts for GPIO pins, camera and display connector, HDMI, microSD, USB and Ethernet.
  • Mounting points: two hookup holes let you fix the case inside a project.
  • Stable footing: four non-slip silicone gaskets fit the bottom corners.

Specifications Explained

Compatibility is limited to the Raspberry Pi 3 and Pi 3+, so check your board model before ordering. The 91 x 62 x 27 mm body follows the Pi footprint closely, keeping the assembly compact. At 36 g, the case will not noticeably change the weight of a portable setup.

The cooling fan slot is the standout feature: it lets you add active cooling without cutting or drilling the shell. Combined with the rear vents, it supports better airflow than a fully sealed box. The microSD slot stays accessible, so you can swap cards without opening the case.

Compatibility and Requirements

The case is designed for Raspberry Pi 3 and Raspberry Pi 3+ boards. A cooling fan and the Raspberry Pi board itself are not included. You will need a fan if you plan to use the front slot, and the supplied screws are intended for fitting the fan and securing the board to the case.

Typical Uses

Use it for a home media or automation hub, a school coding project, a retro gaming build or a bench test rig where the board needs protection but ports must stay open. The mounting holes also suit projects where the Pi is fixed to a panel or inside a larger enclosure.

What's in the Box

  • 1 x Transparent ABS case for Raspberry Pi 3/3+
  • 4 x Non-slip silicone gaskets
  • 4 x Screws for fan and board mounting

No Raspberry Pi board and no cooling fan are included.

Quick specs

Compatibility
Pi 3, Pi 3+
Dimensions (L x W x H) mm
91 x 62 x 27
Weight (g)
36g
Additional Specs.
Cooling FAN Slot: Yes
SD Card Slot
Yes
Color
Transparent
See all specifications