Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 15 cm replacement cable made for TS835 and TS832 FPV video transmitters. It is a simple spare part for restoring the transmitter connection when the original wire is damaged or lost.

Key Highlights

  • Replacement cable designed for TS835 and TS832 FPV transmitters
  • 15 cm length suits compact RC and FPV builds
  • Useful spare for repairs, rebuilds and maintenance
  • Lightweight part at just 0.01 kg shipping weight
  • Compact packaged size of 5 x 5 x 1 cm
  • Simple way to keep a transmitter connection serviceable

Ideal For

  • FPV pilots maintaining TS835 or TS832 transmitters
  • RC builders keeping spare wiring for repairs
  • Hobbyists restoring an existing FPV video setup
  • Makers who prefer to replace a cable rather than a whole transmitter

Buying Tip

Confirm your transmitter is a TS835 or TS832 before ordering, and check that a 15 cm cable run fits your frame layout.

Elecvora expert review

Our verdict

A sensible spare part for anyone running TS835 or TS832 transmitters. It solves a specific problem, replacing a damaged transmitter cable, without adding unnecessary cost.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Made specifically for TS835 and TS832 transmitters
  • Short 15 cm length suits compact builds
  • Lightweight and easy to store as a spare
  • Simple replacement for a damaged cable

Cons

  • Compatibility is limited to the stated transmitter models
  • Connector and installation details are not specified

Best for

Pilots and builders maintaining TS835 or TS832 FPV transmitters

Not ideal for

Transmitters outside the TS835 and TS832 models

Specifications

Cable Length15
CompatibilityTS835/TS832
Shipping Weight0.01 kg
Shipping Dimensions5 × 5 × 1 cm

What's in the box

  • 1 x Replacement cable for TS835/TS832 FPV transmitter

Frequently Asked Questions

Which transmitters does this cable fit?
It is intended for TS835 and TS832 FPV transmitters. Check your model before ordering, as no other compatibility is stated.
How long is the cable?
The cable is 15 cm long, which suits compact FPV and RC wiring runs.
What is included with the cable?
The package includes one replacement cable for TS835/TS832 FPV transmitters.
Can I use it as a spare?
Yes. Its small size and light weight make it convenient to keep as a spare for repairs or rebuilds.
Does it require soldering?
Installation details are not specified in the product data, so check your transmitter setup and connection type before fitting.
How should I care for the cable?
Route it clear of moving parts, avoid sharp bends and secure it so it does not chafe during use.

Overview

This replacement cable is intended for TS835 and TS832 FPV video transmitters. When an original transmitter wire is damaged, lost or worn during a build or repair, this part provides a direct replacement rather than forcing you to source a whole new transmitter. At 15 cm long, it is sized for compact FPV and RC installations where excess wiring can be awkward to route.

It is a practical item for pilots and builders who prefer to keep spare wiring on hand. The cable is lightweight and small in its packaged form, so it stores easily in a parts box or tool bag between projects.

Key Features

  • Replacement cable for TS835 and TS832 FPV transmitters
  • 15 cm length for compact wiring runs
  • Useful as a spare for repairs and rebuilds
  • Lightweight at 0.01 kg shipping weight
  • Small packaged dimensions of 5 x 5 x 1 cm

Specifications Explained

Cable Length

The 15 cm length is the main working dimension. It gives enough wire to connect the transmitter within a typical compact FPV build while avoiding a long loop of excess cable that can be hard to secure. When planning a repair, check that 15 cm suits the distance between your transmitter and the connection point in your frame.

Compatibility

This cable is specified for TS835 and TS832 FPV transmitters. Matching the cable to these models is the key requirement before ordering, since it is not described as a universal cable for other transmitters.

Shipping Weight and Dimensions

At 0.01 kg and packaged at 5 x 5 x 1 cm, the cable is a small, light part. That makes it convenient to store as a spare and easy to include alongside other components in a larger order.

Compatibility and Requirements

Use this cable with TS835 or TS832 FPV transmitters. No other compatibility is stated, so check your transmitter model before purchase. Installation requirements such as connectors, soldering or additional hardware are not specified in the product data, so review your own transmitter setup before fitting.

Typical Uses

  • Replacing a damaged transmitter cable during a repair
  • Keeping a spare on hand for future rebuilds
  • Maintaining TS835 or TS832 transmitters in RC aircraft
  • Restoring a video transmission connection in an existing build

What's in the Box

One replacement cable for TS835/TS832 FPV transmitters is included.

Quick specs

Cable Length
15
Compatibility
TS835/TS832
Shipping Weight
0.01 kg
Shipping Dimensions
5 × 5 × 1 cm
See all specifications