
1 / 3 · Click to enlarge
At a glance
This multi-parameter environmental sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model no. / name Turbidity Sensor; voltage rating 5. Check that your power source supplies 5 before connecting it.
Key Highlights
- Item Type: Sensor
- Model No. / Name: Turbidity Sensor
- Voltage Rating: 5
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Sensor |
|---|---|
| Model No. / Name | Turbidity Sensor |
| Voltage Rating | 5 |
| Working Current (mA) | 40mA (MAX) |
| Response Time (mS) | <500ms |
| Insulation Resistance (MOhm) | 100MΩ (Min) |
| Analog I/O Pins | 0~4.5V; |
| Operating Temperature (°C) | -20℃~90℃ |
| Shipping Weight | 0.017 kg |
| Shipping Dimensions | 14 × 8 × 2 cm |
Overview
The Turbidity Sensor Module for Suspended Solids Detection is listed in our multi-parameter environmental sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Sensor
- Model No. / Name: Turbidity Sensor
- Voltage Rating: 5 (match this to your power supply; too high a voltage can damage the part)
- Working Current (mA): 40mA (MAX) (your supply must deliver at least this much current)
- Response Time (mS): <500ms
- Insulation Resistance (MOhm): 100MΩ (Min)
- Analog I/O Pins: 0~4.5V;
- Operating Temperature (°C): -20℃~90℃
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
depends on the degree of dirtiness of the water. The dirtier the water, the less light it transmits. Light
The receiving end converts the intensity of the transmitted light to the corresponding current size. The transmitted light is more and the current is larger. On the contrary, the transmitted light is less and the current is smaller.
The turbidity sensor module converts the current signal output by the sensor into a voltage signal and performs AD conversion data processing through the single-chip microcomputer. The remodelling module has analogue and digital output interfaces. The analogue quantity can be sampled and processed by the single-chip A/D converter to know the current water pollution. The digital value can be adjusted through the potentiometer on the module to adjust the trigger threshold. When the turbidity reaches the set threshold, the D1 indicator will be lit, the output of the sensor module changes from high level to low level, and the single-chip monitors the change in level To determine whether the turbidity of the water exceeds the standard, so as to warn or link other equipment. The module is inexpensive, easy to use, and has a high measurement accuracy
It can be used to measure the degree of water pollution of products such as washing machines and dishwashers; it can also be used in industrial field control, environmental sewage collection and other occasions that require turbidity detection and control. PIN DIAGRAM
The composition of the turbidity sensor module is shown below. The module is connected to the turbidity sensor through the 3Pin XH-2.54 connector. Adjust the knob of 10K blue potentiometer to adjust the trigger threshold of digital output.
The module pin definitions are as follows:
- VCC: Positive supply voltage, 5V cannot be used 3.3V
- AO: analogue signal output, output voltage range 0~5V
- DO: digital signal output is less than the set value and outputs high level; greater than the set value and outputs low level
- GND: negative supply voltage
- Module size: 38.6mm*22.1mm
Package Includes:
1 x Turbidity Sensor Suspended Turbidity Value Detection Module KitQuick specs
- Item Type
- Sensor
- Model No. / Name
- Turbidity Sensor
- Voltage Rating
- 5
- Working Current (mA)
- 40mA (MAX)
- Response Time (mS)
- <500ms
- Insulation Resistance (MOhm)
- 100MΩ (Min)













