
1 / 4 · Click to enlarge
AI Summary
A self-assembly desktop CNC router kit with a 126 x 88 x 38 mm work area and 775 spindle for engraving and cutting PCB, aluminum, copper, PVC and wood. GRBL control over USB makes it a practical starting point for learning CNC milling and prototyping.
Key Highlights
- 126 x 88 x 38 mm working range for small parts and PCB work
- 775 spindle motor rated around 8000 r/min at 24V input
- GRBL control software with USB connection via CH340
- Aluminum profile frame keeps the machine rigid and compact
- Supports dual Y-axis motors, offline module and toolsetter
- Handles aluminum, copper, PVC, PCB, wood, acrylic and plywood
Ideal For
- Electronics hobbyists prototyping custom PCB designs
- Makers engraving aluminum and copper nameplates
- DIY enthusiasts learning CNC workflow on a small bench
- Small workshops producing short runs of acrylic and PVC parts
- Model makers cutting plywood and plastic components
Buying Tip
Confirm you have a 24V 5A DC power supply with a 5.5 x 2.5 mm plug before assembly, since the kit is built around that input and the supply is not listed among the included parts.
Elecvora expert review
Our verdict
The CNC1310 is a capable small-format router for anyone who wants to learn CNC and machine soft metals or PCB blanks without a large investment. It rewards careful assembly and modest depth of cut rather than aggressive feeds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact footprint suits a small workbench
- 775 spindle handles aluminum, copper, PVC and PCB
- GRBL control is widely documented and familiar
- Support for dual Y motors, offline module and toolsetter
Cons
- Sold as a kit, so assembly and alignment are required
- Small 126 x 88 x 38 mm work area limits part size
- Requires a separate 24V 5A power supply and Windows PC
Best for
Hobbyists and electronics makers prototyping small PCB and soft-metal parts
Not ideal for
Users needing large workpieces or heavy metal removal in one pass
Specifications
| Item Type | Engraving Machine, Cutting Machine |
|---|---|
| Engraving Size (mm) | 126 x 88 x 38 |
| Model No. / Name | CNC1310 |
| Input Voltage (VDC) | 12~24, recommended input voltage 24V 5A |
| Power Supply Requirements | 24V (110V-240V) |
| Material | Aluminum+Profile |
| Supported Software | GRBL control |
| OS Supports | Windows XP, Win 7, Win 8, Win10 HOME |
| Spindle Motor | 775 spindle |
| Spindle Motor Voltage | 12-36V, (8000r/min, if 24V) |
| Frame Size (mm) | 281mm×281mm×287.5mm |
| Length (mm) | 287 |
| Width (mm) | 219 |
| Shipping Weight | 8 kg |
| Shipping Dimensions | 45 × 26 × 29 cm |
What's in the box
- All parts required to assemble the CNC1310 machine
- Spare tools
Frequently Asked Questions
Does the CNC1310 come preassembled?
What materials can it engrave and cut?
What power supply do I need?
Which operating systems are supported?
Can I add an offline controller or toolsetter?
How large a workpiece can it handle?
Overview
The Two Trees CNC1310 is a desktop CNC router supplied as a kit that you assemble yourself. Once built, it provides a working envelope of 126 x 88 x 38 mm, which is a sensible size for circuit boards, small panels, nameplates and model parts. The frame is made from aluminum and profile extrusion, so it stays compact on a workbench while remaining rigid enough for light machining.
At the heart of the machine is a 775 spindle motor. Running from a 24V supply, it turns at roughly 8000 r/min, which is suitable for engraving and light cutting with small-diameter tools. The machine uses T8 lead screws and 2-phase 4-wire stepper motors rated at 1.3A and 0.25 N.m, giving predictable movement across the axes.
Key Features
- Compact work area: 126 x 88 x 38 mm of travel for PCB, small metal plates and craft parts.
- 775 spindle: accepts a range of end mills, engraving bits and drills for different materials.
- GRBL control: a well-known open control firmware with USB connectivity through a CH340 interface.
- Expansion friendly: supports two motors on the Y axis, an offline control module and a toolsetter connection.
- MOSFET spindle driver: rated up to 60V, with 48V and 10A recommended as practical limits.
- PWM spindle speed control: lets the control software adjust spindle speed where supported.
Specifications Explained
Work area and frame
The 126 x 88 x 38 mm engraving size defines the largest workpiece you can machine in one setup. The overall frame measures 281 x 281 x 287.5 mm, so plan for a footprint of roughly 28 cm square plus clearance for cables and the spindle. The machine body is 287 mm long and 219 mm wide.
Spindle and power
The 775 spindle runs on 12 to 36V and reaches about 8000 r/min at 24V. A 24V 5A supply is recommended for stable operation, and the power input uses a 5.5 x 2.5 mm DC jack. The spindle driver is a MOSFET design rated to 60V maximum, with 48V and 10A suggested as working limits.
Motion hardware
T8 lead screws convert motor rotation into linear movement, while the 2-phase 4-wire stepper motors provide 1.3A and 0.25 N.m of holding torque. This combination is intended for light, precise passes rather than heavy material removal.
Compatibility and Requirements
The CNC1310 is controlled through GRBL software over a USB connection using a CH340 interface. Supported operating systems are Windows XP, Windows 7, Windows 8 and Windows 10 Home. You will need to supply a suitable 24V DC power supply with at least 5A output, since the machine kit is built around that input. A computer running one of the listed Windows versions is required for USB control.
Typical Uses
The machine is suited to engraving and milling soft metals such as aluminum and copper, cutting and shaping PVC, and producing custom PCB designs. It also works with wood, plastic, acrylic and plywood. Typical applications include electronics prototyping, DIY projects, small-scale production runs and general hobbyist CNC work.
What's in the Box
The standard package contains all the parts needed to assemble the machine, along with spare tools. Note that the CNC1310 is not preassembled; assembly and installation instructions are provided in the manual included with the packaging.

Quick specs
- Item Type
- Engraving Machine, Cutting Machine
- Engraving Size (mm)
- 126 x 88 x 38
- Model No. / Name
- CNC1310
- Input Voltage (VDC)
- 12~24, recommended input voltage 24V 5A
- Power Supply Requirements
- 24V (110V-240V)
- Material
- Aluminum+Profile













