
1 / 7 · Click to enlarge
At a glance
This electronics is a good fit for makers, students and electronics hobbyists. Main specs: microcontroller ATmega328; usb-ttl converter CH340G; power out 5V-800mA. Check that your power source supplies 5V before connecting it.
Key Highlights
- Microcontroller: ATmega328
- USB-TTL converter: CH340G
- Power Out: 5V-800mA
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Microcontroller | ATmega328 |
|---|---|
| IC Wi-Fi | ESP8266 |
| USB-TTL converter | CH340G |
| Power Out | 5V-800mA |
| Power IN. USB | 5V (500mA max.) |
| Power IN. VIN/DC Jack | 9-24V |
| Power Consumption | 5V 800mA |
| Logic Level | 5V |
| WiFi | Wi-Fi 802.11 b/g/n 2.4 GHz |
| USB | Micro USB |
| Clock Frequency | 16MHz |
| Operating Supply Voltage | 5V |
| Digital I/O | 14 |
| Analog I/O | 6 |
| Memory Size | 32Mb |
| Interface Type | serialOTA |
| Operating temperature | −40С°/+125С° |
| Length×Width | 53.34×68.58mm |
| Weight | 8 |
| Antenna | Buil-inexternal antenna |
Overview
The UNO+WiFi R3 ATmega328P+ESP8266 Module 32Mb Memory USB-TTL CH340G is listed in our electronics range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Microcontroller: ATmega328 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- IC Wi-Fi: ESP8266 (2.4 GHz reaches further, 5 GHz is faster at short range)
- USB-TTL converter: CH340G
- Power Out: 5V-800mA
- Power IN. USB: 5V (500mA max.)
- Power IN. VIN/DC Jack: 9-24V
- Power Consumption: 5V 800mA
- Logic Level: 5V
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Description:
Full integration on one board: Uno R3 ATmega 328 and WiFi ESP8266 with memory 32Mb (MegaByte). All of the modules can work together or each separately. And everyone has their own pinout headers.
The convenient solution for the development of new projects requiring U n o and WiFi.
Via USB you can update sketches and firmvare for ATmega328 and for ESP8266. For this on board have the USB-serial converter CH340G.
Use this board is very simple.
The board has DIP-switch, to connect the modules.
For example, to: USB and ATmega328, USB and ESP8266, ATmega328 and ESP8266.
Table DIP- switch:

Specification:
Package included:
1 x ATmega328P+ESP8266 Board 32Mb Memory
,
,
,
,
,
Quick specs
- Microcontroller
- ATmega328
- IC Wi-Fi
- ESP8266
- USB-TTL converter
- CH340G
- Power Out
- 5V-800mA
- Power IN. USB
- 5V (500mA max.)
- Power IN. VIN/DC Jack
- 9-24V











