Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This gsm and rf antenna is a good fit for makers, students and electronics hobbyists. Main specs: operating frequency (mhz) 915; operating voltage 3.3 – 7 V; operating temperature (°c) -40 to 90°C. Check that your power source supplies 3.3 – 7 V before connecting it.

Key Highlights

  • Operating Frequency (MHz): 915
  • Operating Voltage: 3.3 – 7 V
  • Operating Temperature (°C): -40 to 90°C

Ideal For

  • Repairs around the home
  • Electronics bench work
  • Workshop jobs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Frequency (MHz)915
Operating Voltage3.3 – 7 V
Operating Temperature (°C)-40 to 90°C
Data Transfer Rate150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
Transmit Power (dBm)19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver Sensitivityup to -98 dBm
UDP sustained throughput135 Mbps
Shipping Weight0.04 kg
Shipping Dimensions6 × 4 × 3 cm

Overview

The Unsoldered Lora 915MHz Shield for TTGO T-SIM7000G Module is listed in our gsm and rf antenna range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Frequency (MHz): 915 (make sure the rest of your system works at this frequency)
  • Operating Voltage: 3.3 – 7 V (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): -40 to 90°C
  • Data Transfer Rate: 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
  • Transmit Power (dBm): 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
  • Receiver Sensitivity: up to -98 dBm
  • UDP sustained throughput: 135 Mbps
  • Shipping Weight: 0.04 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The 915 MHz antenna needs to be connected with the IPEX interface (If the antenna is not connected, the signal may be almost. When the battery is full, the blue LED will stop working. When using, pay attention to “+” and “-” of the battery, otherwise, it will be damaged. With the IO port touchscreen touch signal input, you need to add the 100nF pull-down capacitor to this pin.

Features: 

  1. SX1276 chip based on ESP32 Wi-Fi, 868 – 915 MHz frequency, high sensitivity over -148 dBm, + 20 dBm output power, high reliability, long-transmission distance
  2. Onboard 32 MB flash Wi-Fi antenna, 0.96-inch OLED display, lithium battery charging circuit, CP2102 interface, and USB serial chip, perfect support for Arduino development environment, can be used for program checking, product development is very easy and fast
  3. Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes

Package Includes:

1 x Unsoldered Lora 915MHz Shield for TTGO T-SIM7000G Module

Quick specs

Operating Frequency (MHz)
915
Operating Voltage
3.3 – 7 V
Operating Temperature (°C)
-40 to 90°C
Data Transfer Rate
150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
Transmit Power (dBm)
19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver Sensitivity
up to -98 dBm
See all specifications