
1 / 10 · Click to enlarge
At a glance
This fpga development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Programmer; ram 2GB; microprocessor Altera.
Key Highlights
- Item Type: Programmer
- RAM: 2GB
- Microprocessor: Altera
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Programmer |
|---|---|
| RAM | 2GB |
| Microprocessor | Altera |
| Architecture | CPLD/FPGA |
| Connector Type | USB |
| Length (mm) | 65 |
| Width (mm) | 55 |
| Height(mm) | 15 |
| Weight (g) | 113, 113 g |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 8 × 6 × 5 cm |
Overview
The USB Blaster ALTERA CPLD/FPGA Programmer is listed in our fpga development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Programmer
- RAM: 2GB (more memory leaves room for larger programs and buffers)
- Microprocessor: Altera (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Architecture: CPLD/FPGA
- Connector Type: USB (confirm your cable or board uses the same connector)
- Length (mm): 65 (measure your mounting space before ordering)
- Width (mm): 55 (measure your mounting space before ordering)
- Height(mm): 15 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
USB Blaster ALTERA CPLD/FPGA programmer Supports 1.5V,1.8V,2.5V,3.5V and 5.0V as well as all ALTERA products like CPLD ( MAX3000, MAX7000, MAX9000 and MAX II ) ; FPGA ( Stratix, StratixII, Cyclone, CycloneII, ACEX 1K, APEX20K and FLEX 10K ), Cyclone (EP1C3, EP1C6, EP1C12, EP1C20) ; Cyclone II (EP2C5, EP2C8, EP2C35) ; Stratix (EP1S10, EP1S20, EP1S25); Stratix II(EP2S60) ; FLEX10K(EPF10K10, EPF0K30) ; ACEX1K(EP1K30) ; MAX7000(MAX7128SLC84, MAX7128) ; AETC100(MAX3000, MAX3128) ; MAXII(MAXII240, MAXII570, MAXII1270) ; EPCS(EPCS1, EPCS4, EPCS16) ; EPC(EPC1, EPC4); Active serial configuration device (EPCS1, EPCS4, EPCS16)
The device is tested with the different program mode like JTAG ( Cyclone, CycloneII, Stratix II, Flex10K, Acex1K, Max7000, and Max3000); AS ( EPCS1, EPCS4, EPCS16); PS (Stratix, Stratix GX )
ALTERA USB Blaster Support AS, PS, and JTAG program ( with Verify and BankCheck function), Support embedded logic analyzer function of SignalTapII and NIOS II communication and debugger -- When you use it to debug your Black Gold, it will not Pop-up warning It is Faster about 6 times than ByteblasterII and with USB interface you don't need a PC with serial port now. It is 100% compatible with Official ALTERA USB Blaster.Features:
- Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
- Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000, and MAXII.
- FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K, and FLEX10K, etc.
- Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
- Enhanced configuration devices: EPC1, EPC4.
- Supports 3 download mode: AS, PS, and JTAG.
- Support and Nios II embedded soft core processor communication and debugging Rev.C latest version Hardware. Support jtag_uart.
- Speed is 6 times faster than parallel port download cable ByteBlasterII.
- Easy to use: MiniUSB interface, easy connection, two status indicator makes debugging more comfortable.
- Fully compatible with ALTERA USB Blaster, functionality and performance are the same as ALTERA original download cable.
- Operating Voltage: 1.5~5V JTAG IO Voltage.
- System configuration: Windows XP, Windows Vista, Windows7, USB interface.
Package Includes:
1 x USB blaster device.
1 x USB cable.
1 x 10pin JTAGE cable.
Quick specs
- Item Type
- Programmer
- RAM
- 2GB
- Microprocessor
- Altera
- Architecture
- CPLD/FPGA
- Connector Type
- USB
- Length (mm)
- 65













