At a glance
This rf amplifier is a good fit for makers, students and electronics hobbyists.
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Overview
The USB Type-C DC 5V CW Morse Telegraph Touch Sensitive Automatic Key Module Amateur Radio Morse is listed in our rf amplifier range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Parameter:
Power Supply Voltage: Type-C interface DC-5V
Output Interface: 3.5mm interface
Operating Environment: -40°C to 85°C
Principle Description:
The touch key is divided into upper and lower layers, the upper layer is the main circuit and interface part of the key, and the lower layer is the magnet fixing base. The whole machine uses a touch chip to sense the capacitance change from the metal ball. After the human body touches the metal ball, the change in capacitance is transmitted to the relevant pins of the chip through the line, and the relevant keying signal is amplified and driven by the triode, and finally transmitted to the At the key interface, the logics of the whole machine is that the effective keying signal is low level, and the non-touch signal is 5V high level. This level form matches the operation of most radios. The lower layer is a strong magnet, which can be sucked on any iron shell and play the role of fixing the electric key.
Instructions for Use:
The USB cable can be connected to a mobile phone charger or a computer. Note that the USB must be powered by 5V, and other voltages will burn the chip. After the power is turned on, the LED at the position of the USB port will light up, indicating that the power supply is normal. At this time, if you touch the left and right metal balls, you can see the LED light at the corresponding ball position. At this time, the touch is valid and the product function is normal. The touch button on the right is for a short time, which represents a point, and the touch button on the left is for a long time, which represents a stroke.
Package Include:
1x Touch Key Module









Explore more
Cheaper Alternatives

Donut Broadband Antenna 10kHz-180MHz SMA Male Omnidirectional Shortwave Mediumwave Antenna for Quansheng UV-K5/K6 Walkie Talkies SDR Receiver Malahit-DSP2 Pocket Radio

ADS-B 1090MHZ Antenna Gain 2.0dBi Frequency Range 1060-1120 MHz
DC-4.0GHz Radio Frequency Fixed Attenuator RF Amplifier Module
Upgrade Options
High Power RF Amplifier 433MHz 25W Wide Frequency Range 390-470MHz Intelligent Temperature Control High Gain 30dB SMA-K Connector
UNI-730A Automatic Paddle Key Keyer CW Morse Code for HAM Radio with Silver Plating and 3.5mm Jack

HF20A Short Wave Full-Length Single-Line Traveling Wave Antenna 1000W Max Power 0-800KM Range SWR<2.0 High Radiation Efficiency Portable








