Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 1.5 m black USB to Micro USB cable with an inline ON/OFF switch for controlling Raspberry Pi power without unplugging. It supports power supply up to 2 Amp and helps reduce wear on the board's Micro USB connector.

Key Highlights

  • Inline ON/OFF switch controls power without pulling the cable
  • 1.5-metre black USB to Micro USB cable
  • Can supply power to the Raspberry Pi up to 2 Amp
  • Reduces repeated plugging and unplugging at the connector
  • Compact and lightweight for desk or bench use
  • Simple press-button operation for on and off control

Ideal For

  • Raspberry Pi hobbyists who reboot their board often
  • Makers and students working on bench prototypes
  • Users who want to reduce wear on the Micro USB port
  • Desk setups needing a tidy inline power switch
  • Anyone powering a Micro USB device up to 2 Amp

Buying Tip

Confirm your Raspberry Pi model uses a Micro USB power input and that your power source can supply the current your board needs within the 2 Amp limit.

Elecvora expert review

Our verdict

A practical, low-cost accessory for Raspberry Pi users who power-cycle their board frequently. The inline switch removes the need to handle the connector each time, and the 2 Amp rating covers typical Pi power needs.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Inline switch makes power control quick and easy
  • Helps protect the Micro USB connector from repeated handling
  • Useful 1.5-metre length for desk setups
  • Simple, no-software solution

Cons

  • Not suitable for boards with USB-C power input
  • Power source and current capability are not included
  • Switch adds a point of failure over a plain cable

Best for

Raspberry Pi owners who reboot or power down often

Not ideal for

Boards that do not use a Micro USB power input

Specifications

ColorBlack
Shipping Weight0.06 kg
Shipping Dimensions6 × 6 × 4 cm

What's in the box

  • 1 x USB to Micro USB Cable 1.5 Meters Black with ON/OFF Switch Power Control for Raspberry Pi

Frequently Asked Questions

How does the ON/OFF switch work?
The switch is built into the cable. Press it to cut or restore power to the connected Raspberry Pi without unplugging the Micro USB connector.
Which Raspberry Pi models does it fit?
It is intended for Raspberry Pi boards with a Micro USB power input. Check your board's power connector before ordering.
How much current can it handle?
The cable can be used as a power supply for the Raspberry Pi up to 2 Amp. Keep your board's demand within that limit.
Do I need a separate power adapter?
Yes. The cable connects to a USB power source, which you need to supply separately. Only the cable is included.
What is included in the package?
One USB to Micro USB cable, 1.5 metres, black, with an inline ON/OFF switch.
How should I care for the cable?
Avoid pulling on the cable to disconnect it, keep the switch dry, and do not exceed the 2 Amp power rating.

Overview

This USB to Micro USB cable gives you a simple way to manage power on a Raspberry Pi without constantly handling the connector. A switch sits inline on the 1.5-metre black cable, so you can turn the supply on or off with a press instead of pulling the Micro USB plug out of the board every time you want to restart or shut it down.

That small change makes a real difference in daily use. Repeatedly inserting and removing a cable puts stress on the Pi's Micro USB connector, and this cable is intended to help prevent that kind of wear and tear. It is a straightforward accessory for anyone who reboots, tests or powers down their board regularly.

Key Features

  • Inline power switch: press the button to turn the connected device on or off.
  • 1.5-metre length: enough reach for most desk and bench layouts without excess cable clutter.
  • Up to 2 Amp power supply: suitable for powering a Raspberry Pi within that current limit.
  • Black finish: blends neatly with typical Pi cases, hubs and desk setups.
  • Connector-friendly design: helps reduce repeated pulling and inserting at the Micro USB port.

Specifications Explained

Cable length and colour

At 1.5 metres, the cable gives you room to place the Pi away from the power source while keeping the run tidy. The black colour suits most setups and is easy to match with other accessories.

Power handling

The cable can be used as a power supply for the Raspberry Pi up to 2 Amp. Match it with a suitable USB power source for your board and keep the current demand within that figure.

Switch function

The ON/OFF switch is built into the cable itself, so no separate adapter or inline module is needed. It lets you interrupt and restore power at the cable rather than at the board's connector.

Physical details

The cable ships at a light 0.06 kg with compact packaging dimensions of 6 x 6 x 4 cm, making it easy to store or send as a small accessory.

Compatibility and Requirements

This cable is intended for Raspberry Pi boards that use a Micro USB power input and for power supply up to 2 Amp. You will need a suitable USB power source to connect the USB-A end. Check that your board's power connector is Micro USB before ordering.

Typical Uses

  • Powering a Raspberry Pi on a desk or workbench setup.
  • Rebooting or shutting down the board without unplugging the cable.
  • Reducing strain on the Pi's Micro USB connector during frequent testing.
  • Teaching, prototyping and hobby projects where quick power control is handy.

What's in the Box

1 x USB to Micro USB Cable 1.5 Meters Black with ON/OFF Switch Power Control for Raspberry Pi.

Quick specs

Color
Black
Shipping Weight
0.06 kg
Shipping Dimensions
6 × 6 × 4 cm
See all specifications