Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type Other Board; board type VGA Module; model no. / name VGA666.

Key Highlights

  • Item Type: Other Board
  • Board Type: VGA Module
  • Model No. / Name: VGA666

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeOther Board
Board TypeVGA Module
Model No. / NameVGA666
Video resolution800 X 600
FPS30 FPS
Maximum Colours262144
Length (mm)64
Width (mm)32.24
Weight (g)16.48
Shipping Weight0.02 kg
Shipping Dimensions7 × 3 × 2 cm

Overview

The VGA666 RPI Dtoverlays Module is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Other Board
  • Board Type: VGA Module
  • Model No. / Name: VGA666
  • Video resolution: 800 X 600
  • FPS: 30 FPS
  • Maximum Colours: 262144
  • Length (mm): 64 (measure your mounting space before ordering)
  • Width (mm): 32.24 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This Module has another name: Gert -VGA-adapter, or Passive VGA adapter 666 for Raspberry Pi A+/B+/2B/3B/Zero. The Raspberry Pi has an HDMI port to connect a display. If your monitor only has VGA, you have to use an adapter. Because this requires a digital-to-analog conversion, those adapters can be quite pricey, and they can draw lots of power. As well as just allowing you to connect a VGA monitor natively. And unlike composite video, the DPI interface can be run independently of the HDMI. The software for dual screens is still under development. Running two screens at maximum resolution will depend on the speed of GPIO. This wasn’t possible on the Model A or B. And there’s a catch: as the board uses most of your GPIO pins, you lose access to them.
How to use it:
Edit /boot/config.txt file with vim.tiny or other editor. and modify as following: framebuffer_width=800 framebuffer_height=600 dpi_group=2 device_tree=bcm2710-rpi-3-b.dtb dpi_mode=86 dtparam=i2c_arm=off dtparam=spi=off dtparam=uart0=off dtparam=uart1=off dtoverlay=pi3-disable-bt-overlay dtoverlay=vga666 enable_dpi_lcd=1 display_default_lcd=1 force_pwm_open=0 dtparam=audio=on start_x=1 gpu_mem=128

Features:

  1. Support for Raspberry Pi 3B / 2B / B+ / A+
  2. The VGA output supports resolution:from 640 x 480 up to 1920 x 1024 at 60fps.
  3. With 6 bits per channel, you have a maximum of 262144 colors.
  4. Easy to setup.
  5. Easy to configure.

Package Includes:

1 x VGA666 RPI Dtoverlays Module

Quick specs

Item Type
Other Board
Board Type
VGA Module
Model No. / Name
VGA666
Video resolution
800 X 600
FPS
30 FPS
Maximum Colours
262144
See all specifications