At a glance
Made by WalnutPi, this raspberry pi & orange pi is a good fit for makers, students and electronics hobbyists. Main specs: mcu ESP32-S3R2 32-bit dual core @up to 240MHz; ram 2M Bytes PSRAM; flash 8M Bytes.
Key Highlights
- Wireless connection
- MCU: ESP32-S3R2 32-bit dual core @up to 240MHz
- RAM: 2M Bytes PSRAM
- FLASH: 8M Bytes
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| MCU | ESP32-S3R2 32-bit dual core @up to 240MHz |
|---|---|
| RAM | 2M Bytes PSRAM |
| FLASH | 8M Bytes |
| WiFi | 2.4GHz WiFi 802.11 b/g/n |
| Bluetooth | Bluetooth 5 BLE+Mesh |
| Antenna | High gain ceramic antenna (ipex4 external optional) |
| LED | -Programmable LED--Blue LED -Power indicator LED--Red LED |
| KEY | -Function(boot) -RST |
| GPIO | 25xGPIOs (Including ADC/PWM/UART/I2C/SPI functions) |
| USB | Type-C, USB2.0, firmware download / programming / debugging / power supply all in one |
| Others | -Reserved Uart Debug (UART0) -Back solder pads TP1:GND, TP2:USB-, TP3:USB+, TP4:GPIO3, TP5:GPIO46, TP6: GPIO0 |
| Programming Language | MicroPython |
Overview
The WalnutPi PicoW ESP32-S3 Development Board Dual-Core up to 240MHz WiFi Bluetooth 5 MicroPython Type-C USB GPIO for IoT Projects Embedded Systems, made by WalnutPi, is listed in our raspberry pi & orange pi range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- MCU: ESP32-S3R2 32-bit dual core @up to 240MHz (look up this chip to confirm it runs the firmware or libraries you plan to use)
- RAM: 2M Bytes PSRAM (more memory leaves room for larger programs and buffers)
- FLASH: 8M Bytes (space for firmware, files or media)
- WiFi: 2.4GHz WiFi 802.11 b/g/n (2.4 GHz reaches further, 5 GHz is faster at short range)
- Bluetooth: Bluetooth 5 BLE+Mesh (check your phone or controller supports the same Bluetooth version for full range)
- Antenna: High gain ceramic antenna (ipex4 external optional)
- LED: -Programmable LED--Blue LED -Power indicator LED--Red LED
- KEY: -Function(boot) -RST
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Introduction:
WalnutPi PicoW is an MCU-level product under the WalnutPi ecosystem, based on Espressif's ESP32-S3 (built-in WiFi and Bluetooth functions) high-performance processor, with a size compatible with Raspberry Pi PicoW, and has excellent RF performance, suitable for all kinds of electronic product DIY and commercial project development.
Features:
1. Powerful Dual-Core MCU
Powered by the ESP32-S3R2 MCU, featuring dual Tensilica LX7 cores with a top speed of 240MHz, delivering robust performance for IoT applications and complex computational tasks.
2. Compact Size with Flexible Mounting
Measuring just thumb-size, the board includes a stamp hole layout for easy surface mounting on various projects, optimizing spatial efficiency in embedded system designs.
3. Advanced Wireless Connectivity
Offers seamless wireless communication via integrated 2.4GHz WiFi and Bluetooth 5 (with BLE and Mesh), enabling effortless integration into IoT ecosystems.
4. Versatile GPIO and Rich Interfaces
Equipped with 25 GPIO pins supporting diverse protocols such as ADC, PWM, UART, I2C, and SPI, this board enables versatile connectivity for sensors, displays, and modules.
5. Comprehensive Community and Tutorials
Comes with abundant software resources and a thriving Walnut Pi community, providing valuable examples and documentation to aid DIY electronics enthusiasts and commercial developers.
Package Included:
Non-soldered Type:
1 x WalnutPi PicoW ESP32-S3 Development Board
2 x 20P/2.54mm Pin Header
Soldered Type:
1 x WalnutPi PicoW ESP32-S3 Development Board
Only Cable Type:
1 x Type-C USB Cable







Quick specs
- MCU
- ESP32-S3R2 32-bit dual core @up to 240MHz
- RAM
- 2M Bytes PSRAM
- FLASH
- 8M Bytes
- WiFi
- 2.4GHz WiFi 802.11 b/g/n
- Bluetooth
- Bluetooth 5 BLE+Mesh
- Antenna
- High gain ceramic antenna (ipex4 external optional)
Upgrade Options
Radioberry V2.0 Software Defined Radio AD9866 +10CL016 Module for Raspberry PI4B RPI4B Radio Berry Radio Module

10.1 Inch Touchscreen Display for Raspberry Pi IPS Capacitive HD Multimedia Interface 1024x600 1280x800 High Resolution Dual Speakers Backlight Adjustable
AMNVOLT ANET-5 USB 3.2 to 5GbE Adapter Wired LAN Network Connection for Raspberry Pi 5G/2.5G/1G/100Mbps 5000Mbps USB-C to RJ45 Network Converter









