Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This water quality sensors is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name TDS Sensor; operating voltage (vdc) 5; measurement range 0-3000PPM,. Check that your power source supplies 5 before connecting it.

Key Highlights

  • Model No. / Name: TDS Sensor
  • Operating Voltage (VDC): 5
  • Measurement Range: 0-3000PPM,

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameTDS Sensor
Operating Voltage (VDC)5
Measurement Range0-3000PPM,
Measurement Accuracy0.02
Connector TypePlug 1/4" PE
Probe Diameter6.35mm
Shipping Weight0.02 kg
Shipping Dimensions9 × 6.5 × 1 cm

Overview

The Water Quality Sensor TDS Water Quality Testing Probe is listed in our water quality sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: TDS Sensor
  • Operating Voltage (VDC): 5 (match this to your power supply; too high a voltage can damage the part)
  • Measurement Range: 0-3000PPM, (quoted range is usually line-of-sight; walls and interference shorten it)
  • Measurement Accuracy: 0.02
  • Connector Type: Plug 1/4" PE (confirm your cable or board uses the same connector)
  • Probe Diameter: 6.35mm
  • Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 9 × 6.5 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Water Quality Sensor TDS Water Quality Testing Probe detects the Total Dissolved Solids (TDS) levels in the water which can be used to indicate the water quality. It supports 3.3/5V input voltage and 0 ~ 2.3V Output Voltage making it easy to be compatible with all Arduino Boards. 

Note: The actual image may vary in terms of cable color.


Features:

  1. Apply to the water quality of pure water machine probe
  2. Cooperating with the corresponding circuit can detect the conductivity of pure water values.
  3. fast installation,no leakage,long service life

Package Includes:

1 x Water Quality Sensor TDS Water Quality Testing Probe

Quick specs

Model No. / Name
TDS Sensor
Operating Voltage (VDC)
5
Measurement Range
0-3000PPM,
Measurement Accuracy
0.02
Connector Type
Plug 1/4" PE
Probe Diameter
6.35mm
See all specifications