Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 12V DC linear actuator delivering a 200 mm stroke, 700 N of force and 12 mm/s movement in an IP52-rated aluminium body. Its built-in limit switch and self-locking design make positioning and holding loads straightforward.

Key Highlights

  • 12V DC operation with 700 N push force and 12 mm/s speed
  • 200 mm stroke length in a 330 mm aluminium alloy body
  • IP52 protection against dust and water ingress
  • Self-locking force up to 1100 N when power is removed
  • Built-in limit switch for end-of-stroke protection
  • Low noise operation under 40 dB at 750 mA no-load current

Ideal For

  • Machine builders needing compact linear motion
  • Agricultural equipment technicians
  • Industrial automation integrators
  • Makers and prototype engineers
  • Maintenance teams replacing small actuators

Buying Tip

Check that your 12V supply and reversing controller can handle the 750 mA no-load current and that the 200 mm stroke and 700 N force suit your load before ordering.

Elecvora expert review

Our verdict

A well-rounded compact actuator for light to medium positioning work, with useful self-locking and a built-in limit switch. It is best suited to controlled 12V installations where the 200 mm stroke and 700 N force match the job.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Self-locking up to 1100 N holds position without power
  • Built-in limit switch simplifies end-of-stroke control
  • Quiet operation under 40 dB
  • Compact aluminium body with IP52 protection

Cons

  • Requires a separate 12V supply and reversing controller
  • IP52 is not rated for submersion
  • Mounting hardware and wiring not included

Best for

Light industrial, agricultural and automation positioning tasks

Not ideal for

Heavy-duty or fully submerged applications

Specifications

Operating Voltage (VDC)12
Stroke Length (mm)200
Force (N)700
Speed (mm/s)12
Body MaterialAluminium Alloy
Operating Temperature (°C)-20 to 85
No Load Current (mA)750
Protection levelIP52
Self Locking Force (N)1100
Speed at Full Load (mm/Sec)12
Noise (dB)<40
Length (mm)330
Width (mm)78
Weight (g)990
Shipping Weight1.05 kg
Shipping Dimensions34 × 8 × 5 cm

What's in the box

  • 1 x Waterproof Stroke Length DC12V 200MM 12MM/S 700N Putter Electric Linear Actuator

Frequently Asked Questions

What voltage does this actuator need?
It operates on 12V DC and draws about 750 mA at no load. Use a stable 12V supply rated for the motor current.
How do I make it extend and retract?
Reverse the polarity of the 12V supply using a switch or controller. One polarity extends the rod and the other retracts it.
Does it stop automatically at the ends?
Yes, a built-in limit switch stops travel at the end of the 200 mm stroke to protect the mechanism.
Is it fully waterproof?
It carries an IP52 rating, which protects against limited dust and water spray. It is not intended for submersion.
What is included in the package?
The package contains one 12V 200 mm stroke 700 N electric linear actuator. Mounting hardware and wiring are not included.
Can it hold a load when powered off?
Yes, the self-locking force is rated up to 1100 N, so it resists back-driving when power is removed.

Overview

This electric linear actuator turns the rotary output of a permanent magnet DC motor into controlled linear motion. Powered from a 12V DC supply, it extends and retracts through a 200 mm stroke at roughly 12 mm/s while delivering up to 700 N of force. The aluminium alloy frame and extension tube keep the unit compact at 330 mm long, 78 mm wide and about 990 g, which suits installations where space is limited but reliable movement is needed.

A built-in limit switch stops travel at the ends of the stroke, and the self-locking design holds up to 1100 N when the actuator is unpowered. With an IP52 rating, a -20 to 85 °C operating range and under 40 dB noise, it is built for light industrial and outdoor-adjacent environments.

Key Features

  • 200 mm stroke with 700 N push force and 12 mm/s speed
  • Aluminium alloy body with IP52 protection against dust and water spray
  • Self-locking force up to 1100 N for holding position without power
  • Built-in limit switch for safe end-of-stroke operation
  • Permanent magnet DC motor with a new carbon brush structure
  • Quiet running below 40 dB and 750 mA no-load current

Specifications Explained

Stroke and speed

The 200 mm stroke defines how far the rod travels, while 12 mm/s sets how quickly it moves. Full-load speed stays at 12 mm/s, so travel timing is predictable across the stroke.

Force and self-locking

700 N of rated force handles pushing and pulling loads, and the 1100 N self-locking force means the rod resists being back-driven once power is removed.

Protection and environment

IP52 indicates limited dust ingress protection and resistance to water spray. The -20 to 85 °C range covers most indoor and sheltered outdoor installations.

Power draw

At 12V DC the no-load current is 750 mA, giving a useful baseline for sizing a power supply and wiring.

Compatibility and Requirements

The actuator requires a 12V DC power source and a reversing switch or controller capable of changing polarity for extend and retract movement. Mounting hardware and wiring are not included, so plan for suitable brackets and cable. Confirm the 200 mm stroke and 700 N force match your load before installation.

Typical Uses

  • Automated lifting and positioning in machinery
  • Agricultural equipment adjustment mechanisms
  • Industrial electric lifting systems
  • Remote or automatic control of push and pull tasks
  • General engineering and prototype builds

What's in the Box

1 x 12V 200 mm stroke 700 N electric linear actuator.

Quick specs

Operating Voltage (VDC)
12
Stroke Length (mm)
200
Force (N)
700
Speed (mm/s)
12
Body Material
Aluminium Alloy
Operating Temperature (°C)
-20 to 85
See all specifications