
1 / 3 · Click to enlarge
AI Summary
A 24V DC linear actuator with 100mm stroke and 1100N force for precise push-pull motion. Its IP52-rated aluminium body and built-in limit switches make it reliable for automation and industrial projects.
Key Highlights
- 1100N push and pull force with 100mm stroke length
- 12mm/s speed at both no load and full load
- IP52 protection against dust and water spray
- Aluminium alloy body with quiet operation under 40dB
- Built-in limit switches for safe end-of-travel stops
- Operates from -20°C to 85°C in demanding environments
Ideal For
- Engineers automating industrial or agricultural machinery
- Makers building remote-controlled hatches or vents
- Maintenance teams replacing worn linear actuators
- Marine and vehicle equipment installers needing spray resistance
- Robotics hobbyists using 24V DC power systems
Buying Tip
Confirm your power supply delivers 24V DC and can handle the startup current, and check that the 100mm stroke and 220mm body length fit your mounting space before ordering.
Elecvora expert review
Our verdict
A solid mid-force actuator with useful built-in limit switches and a weather-resistant housing. It suits automation projects where 1100N and 100mm travel are sufficient.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 1100N force and self-locking for holding loads
- IP52 protection and wide temperature range
- Quiet operation below 40dB
- Built-in limit switches simplify wiring
Cons
- Power supply and mounting hardware not included
- IP52 is not rated for submersion
- No load current of 750mA requires a suitably rated supply
Best for
Industrial and agricultural automation projects needing a compact 24V actuator
Not ideal for
Applications requiring full waterproofing or higher force than 1100N
Specifications
| Operating Voltage (VDC) | 24 |
|---|---|
| Stroke Length (mm) | 100 |
| Force (N) | 1100 |
| Speed (mm/s) | 12 |
| Body Material | Aluminium Alloy |
| Operating Temperature (°C) | -20 to 85 |
| Noise (dB) | <40 |
| Protection level | IP52 |
| Self Locking Force (N) | 1100 |
| No Load Current (mA) | 750 |
| Speed at Full Load (mm/Sec) | 12 |
| Speed at No Load (mm/Sec) | 12 |
| Length (mm) | 220mm |
| Width (mm) | 78mm |
| Shipping Weight | 0.85 kg |
| Shipping Dimensions | 22 × 9 × 5 cm |
What's in the box
- 1 x Electric Linear Actuator
Frequently Asked Questions
What voltage does this actuator require?
Is the actuator waterproof?
Does it include mounting brackets?
How fast does it move?
Can it hold a load when power is off?
What is the operating temperature range?
Overview
The Generic 24V DC electric linear actuator is a compact, robust solution for converting rotary motor motion into linear push-pull movement. With a 100mm stroke, 1100N force and 12mm/s speed, it handles positioning tasks in automation, agriculture and industrial settings. Its aluminium alloy housing and IP52 rating protect against dust and water spray, while the -20 to 85°C range supports use in varied climates.
Key Features
- High force: 1100N push/pull and self-locking force for holding loads without power.
- Consistent speed: 12mm/s at no load and full load for predictable cycle times.
- Built-in limit switches: Stops travel at stroke ends to protect the actuator.
- Quiet operation: Noise below 40dB for noise-sensitive environments.
- Durable construction: Aluminium alloy body and moisture-proof surface.
- Compact size: 220mm length and 78mm width fit tight spaces.
Specifications Explained
24V DC is the required operating voltage; use a power supply rated for at least the 750mA no-load current and additional current under load. 100mm stroke is the travel distance from fully retracted to fully extended. 1100N force is the maximum push or pull the actuator can exert, and the self-locking force indicates it can hold that load when stopped. 12mm/s speed means a full 100mm stroke takes roughly 8.3 seconds. IP52 means limited dust ingress protection and resistance to water spray at up to 15 degrees from vertical. Noise below 40dB is comparable to a quiet room.
Compatibility and Requirements
This actuator requires a 24V DC power source and a reversing switch or motor controller capable of handling the current draw. It is not supplied with mounting brackets, hardware or a power supply. Ensure your installation allows for the 220mm body length and 78mm width, plus clearance for the moving rod.
Typical Uses
- Automating windows, vents and hatches
- Agricultural machinery adjustments
- Industrial lifting and positioning systems
- Clean sweeping vehicle mechanisms
- Marine and vessel equipment (IP52 spray resistance)
- DIY automation and robotics projects
What's in the Box
1 x Electric Linear Actuator. Mounting hardware and power supply are not included.
Quick specs
- Operating Voltage (VDC)
- 24
- Stroke Length (mm)
- 100
- Force (N)
- 1100
- Speed (mm/s)
- 12
- Body Material
- Aluminium Alloy
- Operating Temperature (°C)
- -20 to 85













