
1 / 2 · Click to enlarge
At a glance
Made by WeAct Studio, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: processor QingKe 32-bit RISC-V2A processor; operating frequency (mhz) 48; sram 2KB. Check that your power source supplies 3.3, 5 before connecting it.
Key Highlights
- Processor: QingKe 32-bit RISC-V2A processor
- Operating Frequency (MHz): 48
- SRAM: 2KB
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Processor | QingKe 32-bit RISC-V2A processor |
|---|---|
| Operating Frequency (MHz) | 48 |
| SRAM | 2KB |
| Flash Memory | 16 KB |
| Power Supply Voltage (V) | 3.3, 5 |
| Timer/counters | 1 × 16-bit advanced-control timer, 1 × 16-bit general-purpose timer, 2 Watchdog Timers (WDOG), 1 × 32-bit SysTick timer |
| Communication Mode | 1 USART interface, 1 group of I2C interface, 1 group of SPI interface |
| I/O pins | 18 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 9 × 3 × 2 cm |
Overview
The WeAct Studio CH32V003F4U6 RISC-V Low Power Core Demo Board, made by WeAct Studio, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Processor: QingKe 32-bit RISC-V2A processor (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Operating Frequency (MHz): 48 (make sure the rest of your system works at this frequency)
- SRAM: 2KB
- Flash Memory: 16 KB (more memory leaves room for larger programs and buffers)
- Power Supply Voltage (V): 3.3, 5 (match this to your power supply; too high a voltage can damage the part)
- Timer/counters: 1 × 16-bit advanced-control timer, 1 × 16-bit general-purpose timer, 2 Watchdog Timers (WDOG), 1 × 32-bit SysTick timer
- Communication Mode: 1 USART interface, 1 group of I2C interface, 1 group of SPI interface (confirm your cable or board uses the same connector)
- I/O pins: 18
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Utilizes QingKe 32-bit RISC-V2A processor with support for 2 levels of interrupt nesting.
- Offers a maximum system main frequency of 48MHz for efficient processing. Includes 2KB SRAM and 16KB Flash memory for data storage and program execution.
- Supports dual power supply voltage options: 3.3V or 5V, enabling flexible system design.
- Provides multiple low-power modes such as Sleep and Standby to optimize power consumption.
- Features a 1-channel general-purpose DMA controller for efficient data transfer.
- Incorporates op-amp comparators, a 10-bit ADC, and various timers for precise control and measurement applications.
- Includes standard communication interfaces such as USART, I2C, and SPI for versatile connectivity.
- Offers 18 I/O ports with external interrupt mapping, enhancing flexibility for peripheral connections.
- Implements a 64-bit chip unique ID for device identification and security. Features a 1-wire serial debug interface (SDI) for streamlined development and debugging.
Package Includes:
1 x WeAct Studio CH32V003F4U6 RISC-V Low Power Core Demo BoardQuick specs
- Processor
- QingKe 32-bit RISC-V2A processor
- Operating Frequency (MHz)
- 48
- SRAM
- 2KB
- Flash Memory
- 16 KB
- Power Supply Voltage (V)
- 3.3, 5
- Timer/counters
- 1 × 16-bit advanced-control timer, 1 × 16-bit general-purpose timer, 2 Watchdog Timers (WDOG), 1 × 32-bit SysTick timer



















