Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WeAct Studio, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: processor Qingke V4B; sram 20KB; flash 64KB. Check that your power source supplies 3.3 before connecting it.

Key Highlights

  • Processor: Qingke V4B
  • SRAM: 20KB
  • Flash: 64KB

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ProcessorQingke V4B
SRAM20KB
Flash64KB
Power Supply Voltage (V)3.3
InterfaceCAN, USB2.0 host/device, UARTs (4), IIC (2), SPI (2)
I/O pins37, 16 external interrupts
Shipping Weight0.01 kg
Shipping Dimensions5 × 4 × 2 cm

Overview

The WeAct Studio CH32V203C8T6 RISC-V Low Power Core Demo Board, made by WeAct Studio, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Processor: Qingke V4B (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • SRAM: 20KB
  • Flash: 64KB (space for firmware, files or media)
  • Power Supply Voltage (V): 3.3 (match this to your power supply; too high a voltage can damage the part)
  • Interface: CAN, USB2.0 host/device, UARTs (4), IIC (2), SPI (2) (confirm your cable or board uses the same connector)
  • I/O pins: 37, 16 external interrupts
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 5 × 4 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The WeAct Studio CH32V203C8T6 demo board is powered by the Qingke V4B processor, offering exceptional performance with a system clock frequency of up to 144MHz. It features 20KB of SRAM and 64KB of Flash memory, providing ample space for data storage and program execution. Operating at a supply voltage of 3.3V, the board's GPIO unit is independently powered, offering enhanced flexibility for interfacing with external devices. The board supports various low-power modes, including sleep, stop, and standby, with ultra-low power consumption of 44.65uA/MHz in Run mode and 17.90uA/MHz in Sleep mode. It incorporates essential features such as power-on/power-down reset (POR/PDR), programmable voltage detector (PVD), 18-channel general DMA controllers, amplifiers, 12-bit ADC with TouchKey support, timers, USB2.0 host/device interfaces, UARTs, CAN interface, IIC/SPI interfaces, CRC calculation unit, 96-bit unique ID, and a serial 2-wire debug interface. This demo board is an ideal platform for developing low-power embedded applications requiring high performance and versatile connectivity.

Features:

  1. Qingke V4B processor with up to 144MHz clock frequency
  2. Independent GPIO unit with 3.3V supply voltage
  3. Supports sleep/stop/standby low-power modes
  4. Multiple interfaces including USB2.0, UARTs, CAN, IIC, SPI
  5. Ultra-low power consumption in Run and Sleep modes
  6. DMA Controllers: 18-channel general DMA controllers
  7. Analog Features: 10-channel 12-bit ADC, 10-channel TouchKey, 2 amplifiers
  8. Other Features: Power-on/power-down reset, programmable voltage detector,
  9. CRC calculation unit, 96-bit unique ID, serial 2-wire debug interface

Package Includes:

1 x WeAct Studio CH32V203C8T6 RISC-V Low Power Core Demo Board

Quick specs

Processor
Qingke V4B
SRAM
20KB
Flash
64KB
Power Supply Voltage (V)
3.3
Interface
CAN, USB2.0 host/device, UARTs (4), IIC (2), SPI (2)
I/O pins
37, 16 external interrupts
See all specifications