
1 / 3 · Click to enlarge
AI Summary
A compact RISC-V core board featuring the QingKe 32-bit processor with 16KB Flash and 2KB SRAM. It offers USB PD support, 18 I/O ports, and dual 3.3V/5V operation for flexible embedded projects.
Key Highlights
- 32-bit RISC-V QingKe processor running at up to 48MHz
- 16KB Flash memory and 2KB SRAM for program storage
- Dual power supply options: 3.3V or 5V
- 18 I/O ports with external interrupt mapping
- 10-bit ADC, op-amp comparators, and multiple timers
- 1-wire serial debug interface for easy programming
Ideal For
- Embedded developers exploring RISC-V microcontrollers
- Students learning 32-bit MCU programming
- Makers building compact sensor or control nodes
- Engineers prototyping USB PD or power-delivery designs
- Hobbyists needing a low-cost dev board with rich peripherals
Buying Tip
Confirm that your preferred RISC-V toolchain supports the QingKe RISC-V2A core before purchasing, and plan for a compatible 1-wire debug probe.
Elecvora expert review
Our verdict
The WeAct Studio CH32X035F8U6 offers a capable RISC-V microcontroller in a tiny, affordable package. It is a solid entry point for developers curious about RISC-V or needing a compact board for control and sensor tasks.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Low cost for a 32-bit RISC-V development board
- Dual 3.3V/5V supply simplifies integration
- Rich peripheral set including ADC, comparators, and multiple timers
- Compact size suitable for space-constrained projects
Cons
- Requires a separate debug probe for programming
- Limited Flash and SRAM for complex applications
- Documentation may be less comprehensive than mainstream ecosystems
Best for
Developers and students wanting an affordable RISC-V board for small embedded projects
Not ideal for
Applications requiring large memory or extensive community libraries
Specifications
| Item Type | Power Core Demo Board |
|---|---|
| Power Supply Voltage (V) | 3.3V or 5V |
| Model No. / Name | CH32V003F4U6 RISC-V |
| Processor | 32-bit RISC-V |
| Flash Memory | 2KB SRAM and 16KB |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 6 × 9 × 2 cm |
What's in the box
- 1 x WeAct Studio CH32X035F8U6 CH32X035F8 CH32X035 CH32 USB PD Core Board Demo Board QingKe RISC-V Core Board
Frequently Asked Questions
What microcontroller is on this board?
What is the power supply voltage?
How do I program the board?
How much memory does it have?
What comes in the package?
Does it support USB Power Delivery?
Overview
The WeAct Studio CH32X035F8U6 is a ready-to-use core board that brings the QingKe 32-bit RISC-V microcontroller to your bench. It packs a 48MHz processor, 16KB of Flash memory, and 2KB of SRAM into a small form factor, making it a practical choice for embedded development, rapid prototyping, and educational projects. The board supports both 3.3V and 5V power supplies, so it can slot into a wide range of existing systems without extra level shifting.
Key Features
- RISC-V processing: The QingKe 32-bit core supports two levels of interrupt nesting for responsive control applications.
- Flexible power: Operates from either a 3.3V or 5V supply, simplifying integration with common peripherals and sensors.
- Rich peripherals: Includes a 10-bit ADC, op-amp comparators, multiple timers, and a general-purpose DMA controller.
- Connectivity: Standard USART, I2C, and SPI interfaces are available for communication with external modules.
- Debug support: A 1-wire serial debug interface (SDI) streamlines programming and troubleshooting.
- Unique ID: Each chip carries a 64-bit unique identifier for device authentication or tracking.
Specifications Explained
The 48MHz system clock gives the CH32X035F8U6 enough headroom for control loops, sensor polling, and lightweight signal processing. With 16KB Flash and 2KB SRAM, you can store moderate firmware and runtime data; this is typical for small-form-factor MCUs and suits focused applications rather than large operating systems. The 18 I/O ports, all with external interrupt mapping, let you connect buttons, encoders, relays, or communication lines without running out of pins. The 10-bit ADC is useful for reading analog sensors such as potentiometers, thermistors, or light sensors, while the op-amp comparators can handle threshold detection without extra components. Low-power modes including Sleep and Standby help extend battery life in portable designs.
Compatibility and Requirements
The board requires a regulated 3.3V or 5V DC power source. Programming and debugging are done through the 1-wire serial debug interface, so you will need a compatible debug probe or programmer (not included). Standard development tools for RISC-V microcontrollers are required; check that your toolchain supports the QingKe RISC-V2A core. No additional components are included beyond the core board itself.
Typical Uses
This core board is well suited to industrial control prototypes, sensor nodes, small robotics projects, and educational exercises in embedded programming. Its USB PD capability also makes it interesting for power-delivery experiments and USB-C related development when paired with appropriate firmware. Makers can use it to learn RISC-V architecture on real hardware without a large investment.
What's in the Box
Package includes 1 x WeAct Studio CH32X035F8U6 CH32X035F8 CH32X035 CH32 USB PD Core Board Demo Board QingKe RISC-V Core Board.
Quick specs
- Item Type
- Power Core Demo Board
- Power Supply Voltage (V)
- 3.3V or 5V
- Model No. / Name
- CH32V003F4U6 RISC-V
- Processor
- 32-bit RISC-V
- Flash Memory
- 2KB SRAM and 16KB
- Shipping Weight
- 0.015 kg



















