
1 / 3 · Click to enlarge
AI Summary
A compact ESP32-C6 development board with a 32-bit RISC-V core, WiFi 6, Bluetooth LE and Zigbee/Thread support. Its small footprint and rich peripheral set make it a practical core for IoT prototypes and wireless projects.
Key Highlights
- 32-bit RISC-V processor with WiFi 6, Bluetooth LE and Zigbee support
- 512KB SRAM and 320KB ROM for program and data storage
- Up to 30 GPIOs with SPI, UART, I2C, PWM, ADC and USB Serial/JTAG
- Single USB port for power, programming and serial debugging
- Compact minimum system board suited to breadboards and tight builds
- Supports IEEE 802.15.4 for Zigbee and Thread networking
Ideal For
- IoT developers building WiFi 6 or Zigbee sensor nodes
- Makers learning RISC-V and ESP32-C6 development
- Engineers prototyping compact wireless controllers
- Home automation enthusiasts exploring Thread and Zigbee
- Students building breadboard projects with limited space
Buying Tip
Confirm your toolchain and IDE support the ESP32-C6 before ordering, since this board uses the newer RISC-V core rather than the older Xtensa-based ESP32 chips.
Elecvora expert review
Our verdict
The WeAct Studio ESP32-C6-MiNi packs modern wireless support and a capable RISC-V core into a very small board. It is a sensible choice for compact IoT builds, provided your toolchain already supports the ESP32-C6.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- WiFi 6, Bluetooth LE and IEEE 802.15.4 in one compact board
- Broad peripheral set including SPI, I2C, UART, PWM and ADC
- Small footprint suits breadboards and tight enclosures
- USB Serial/JTAG simplifies programming and debugging
Cons
- Newer RISC-V target may need updated toolchain support
- Bare minimum system board with no onboard sensors or extras
- Package contents are not specified in the listing
Best for
Compact IoT and wireless prototyping with ESP32-C6
Not ideal for
Users who need a fully featured board with onboard sensors and accessories
Specifications
| Item Type | Development Board |
|---|---|
| Processor | 2, 32-bit RISC-V |
| Processor Speed | 2.4 GHz |
| Wireless Standard | Bluetooth |
| USB Port | 1 |
| Connector Type | Bluetooth, Wi-Fi, USB |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 5 × 3 × 2 cm |
Frequently Asked Questions
What processor does this board use?
Which wireless standards are supported?
How is the board powered and programmed?
How much memory is available?
What comes in the package?
How should I handle and store the board?
Overview
The WeAct Studio ESP32-C6-MiNi is a minimum system development board built around the Espressif ESP32-C6. At its centre is a 32-bit RISC-V processor running at up to 2.4 GHz, paired with 512KB SRAM and 320KB ROM. The board brings together WiFi 6, Bluetooth LE and IEEE 802.15.4 wireless connectivity in a very small package, so you can build connected devices without adding separate radio modules.
Because it is a minimum system board, it focuses on the essentials: the ESP32-C6 core, a single USB port for power and programming, and breakout access to the chip's peripherals. That makes it a good fit for breadboard prototyping, compact sensor nodes and projects where board space is limited.
Key Features
- ESP32-C6 RISC-V core: a 32-bit RISC-V processor for general-purpose IoT workloads.
- Triple wireless support: WiFi 6, Bluetooth LE and IEEE 802.15.4 for Zigbee and Thread.
- Generous on-chip memory: 512KB SRAM and 320KB ROM for program execution and data handling.
- Flexible I/O: up to 30 GPIOs with 3x SPI, 2x UART, 1x I2C, RMT, 6-channel LED PWM, a 12-bit ADC with 7 channels, TWAI, USB Serial/JTAG, ETM, MCPWM and SDIO Slave.
- Compact form factor: a small board that fits easily into tight enclosures and breadboards.
Specifications Explained
Processor and memory
The 32-bit RISC-V core handles the application logic, while 512KB SRAM gives you working memory for buffers, stacks and network tasks. 320KB ROM holds the lower-level routines. For most sensor, control and connectivity projects this is a comfortable balance.
Wireless connectivity
WiFi 6 support means the board can join modern 2.4 GHz networks, and Bluetooth LE covers short-range links to phones, sensors and peripherals. IEEE 802.15.4 support opens the door to Zigbee and Thread mesh networking, which is useful for multi-node installations.
Peripherals and I/O
The peripheral list covers the common building blocks of embedded work: SPI for displays and memory, UART for serial devices, I2C for sensors, PWM for LEDs and motors, and an ADC for analogue inputs. USB Serial/JTAG simplifies programming and debugging over the single USB port.
Compatibility and Requirements
The board is programmed and powered through its single USB port, so a suitable USB cable and a host computer are required. Development is typically done with an ESP32-C6 compatible toolchain and IDE. Because the board is a bare minimum system design, you will need to supply your own sensors, displays and other peripherals for your project.
Typical Uses
- IoT sensor nodes and home automation prototypes
- Zigbee and Thread mesh experiments
- WiFi-connected data loggers and controllers
- Breadboard prototyping and learning embedded development
- Compact wireless projects where space is tight
What's in the Box
Package contents are not specified for this listing. Please check the product packaging details before ordering if you need a specific accessory.
Quick specs
- Item Type
- Development Board
- Processor
- 2, 32-bit RISC-V
- Processor Speed
- 2.4 GHz
- Wireless Standard
- Bluetooth
- USB Port
- 1
- Connector Type
- Bluetooth, Wi-Fi, USB



















