Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WeAct Studio, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: wifi (y/n) 802.11b/g/n, 1T1R mode, data rate up to 150Mbps.; processor Xtensa-R 32-bit LX7 dual-core processor, clock frequency support up to 240MHz.; sram 512KB.

Key Highlights

  • Wireless connection
  • WiFi (Y/N): 802.11b/g/n, 1T1R mode, data rate up to 150Mbps.
  • Processor: Xtensa-R 32-bit LX7 dual-core processor, clock frequency support up to 240MHz.
  • SRAM: 512KB

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

WiFi (Y/N)802.11b/g/n, 1T1R mode, data rate up to 150Mbps.
ProcessorXtensa-R 32-bit LX7 dual-core processor, clock frequency support up to 240MHz.
SRAM512KB
ROM Capacity384KB
InterfaceUART, ADC, GPIO, USB OTG, USB Serial controller
Shipping Weight0.01 kg
Shipping Dimensions5 × 5 × 2 cm

Overview

The WeAct Studio ESP32-S3-DevKitC-1 ESP32-S3 WiFi Bluetooth-compatible BLE 5.0 Mesh Development Board ESP32 Wireless Module Micropython, made by WeAct Studio, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • WiFi (Y/N): 802.11b/g/n, 1T1R mode, data rate up to 150Mbps. (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Processor: Xtensa-R 32-bit LX7 dual-core processor, clock frequency support up to 240MHz. (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • SRAM: 512KB
  • ROM Capacity: 384KB (space for firmware, files or media)
  • Interface: UART, ADC, GPIO, USB OTG, USB Serial controller (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 5 × 5 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Introducing the EWeAct Studio ESP32-S3-DevKitC-1 ESP32-S3 WiFi Bluetooth-compatible BLE 5.0 Mesh Development Board ESP32 Wireless Module Micropython, featuring robust wireless capabilities and versatile integration for various applications.

Features:

  1.  Supports Wi-Fi 802.11b/g/n in 1T1R mode, with data rates up to 150Mbps.
  2.  Supports Bluetooth 5.0 and Bluetooth-compatible mesh, with data rates of 125Kbps, 500Kbps, 1Mbps, and 2Mbps.
  3.  Equipped with Xtensa-R 32-bit LX7 dual-core processor, clocked up to 240MHz, with 512KB SRAM, 384KB ROM, and 16KB RTC SRAM.
  4. Offers UART, GPIO, ADC, PWM, I2C, I2S, SPI, LCD, DVP, RMT, SDIO, MCPWM, DMA, USB OTG, USB Serial controller, TWAI controller interfaces, along with temperature sensor, pulse counter, and capacitive sensor GPIO.
  5. Available in SMD-40 package for easy integration. Integrated Components: Integrates Wi-Fi MAC/BB/RF/PA/LNA and Bluetooth components for seamless operation.
  6. Supports multiple sleep modes, with deep sleep current less than 8uA.
  7. Supports serial port rates up to 6Mbps.
  8. Supports STA, AP, STA+AP, and promiscuous modes for versatile connectivity.
  9. Supports Smart Config (APP) and AirKiss (WeChat) for easy network configuration on Android and iOS platforms.
  10. Allows for serial port local upgrade and remote firmware upgrade (FOTA) for convenient maintenance.
  11. Offers general AT commands for quick setup and supports secondary development with integrated Windows and Linux development environments.

Package Includes:

1 x WeAct Studio ESP32-S3-DevKitC-1 ESP32-S3 WiFi Bluetooth-compatible BLE 5.0 Mesh Development Board ESP32 Wireless Module Micropython

Quick specs

WiFi (Y/N)
802.11b/g/n, 1T1R mode, data rate up to 150Mbps.
Processor
Xtensa-R 32-bit LX7 dual-core processor, clock frequency support up to 240MHz.
SRAM
512KB
ROM Capacity
384KB
Interface
UART, ADC, GPIO, USB OTG, USB Serial controller
Shipping Weight
0.01 kg
See all specifications