Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WeAct Studio, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; flash memory 4MB; processor type ARM Cortex-M0+. Check that your power source supplies 3.3 before connecting it.

Key Highlights

  • Item Type: Development Board
  • Flash Memory: 4MB
  • Processor Type: ARM Cortex-M0+

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDevelopment Board
Flash Memory4MB
Processor TypeARM Cortex-M0+
Clock FrequencyUp to 150
Voltage Rating (V)3.3
CPUDual-core ARM Cortex-M0+
Current (mA)100
ProcessorRaspberry Pi RP2350A
SRAM520 KB
Width (mm)21
USB ConnectorUSB Type-C
Length (mm)51
Weight (g)07
Operating Temperature (°C)-20 to +85
Shipping Weight0.015 kg
Shipping Dimensions11 × 7 × 2 cm

Overview

The WeAct Studio RP2350A_V20 Completely replace the original PICO2 Raspberry Pi RP2350 RISC-V Hazard3 520KByte SRAM 4MByte QSPI Flash, made by WeAct Studio, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Development Board
  • Flash Memory: 4MB (more memory leaves room for larger programs and buffers)
  • Processor Type: ARM Cortex-M0+ (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Clock Frequency: Up to 150 (make sure the rest of your system works at this frequency)
  • Voltage Rating (V): 3.3 (match this to your power supply; too high a voltage can damage the part)
  • CPU: Dual-core ARM Cortex-M0+ (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Current (mA): 100 (your supply must deliver at least this much current)
  • Processor: Raspberry Pi RP2350A (look up this chip to confirm it runs the firmware or libraries you plan to use)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The WeAct Studio RP2350A_V20 is a compact, high-performance development board powered by the Raspberry Pi RP2350A dual-core ARM Cortex-M0+ microcontroller. Designed for embedded applications, prototyping, and educational use, it features a 21mm x 51mm form factor ideal for tight spaces. The board supports USB 1.1, multiple GPIOs, PWM, ADC, and I2C/SPI/UART interfaces. It is breadboard-friendly with included 2.54mm pitch headers. Built with a focus on flexibility and ease of use, it supports both C/C++ and MicroPython development via the official Raspberry Pi SDK. This version includes upgraded flash memory and improved USB-C power input for stable connectivity. It’s an excellent choice for DIY electronics, robotics, and IoT projects.


Features:

  1. 264KB SRAM and external flash memory
  2. USB-C interface for power and programming
  3. 26 multi-function GPIO pins
  4. I2C, SPI, UART, PWM, ADC support
  5. Breadboard-friendly with 2.54mm headers
  6. Supports C/C++ and MicroPython

Package Includes: 

1 x WeAct Studio RP2350A_V20 Completely replace the original PICO2 Raspberry Pi RP2350 RISC-V Hazard3 520KByte SRAM 4MByte QSPI Flash

1 x Header pin

1 x connector

 

Quick specs

Item Type
Development Board
Flash Memory
4MB
Processor Type
ARM Cortex-M0+
Clock Frequency
Up to 150
Voltage Rating (V)
3.3
CPU
Dual-core ARM Cortex-M0+
See all specifications