
1 / 4 · Click to enlarge
At a glance
Made by WeAct Studio, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: cpu Arm® 32-bit Cortex®-M4 CPU with FPU; voltage range (v) 1.71 to 3.6; shipping weight 0.04 kg. Check that your power source supplies 1.71 to 3.6 before connecting it.
Key Highlights
- CPU: Arm® 32-bit Cortex®-M4 CPU with FPU
- Voltage Range (V): 1.71 to 3.6
- Shipping Weight: 0.04 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| CPU | Arm® 32-bit Cortex®-M4 CPU with FPU |
|---|---|
| Voltage Range (V) | 1.71 to 3.6 |
| Flash Memory | 128 Kbytes |
| SRAM | 22 Kbytes |
| Communication Mode | 1 x FDCAN, 3 x I2C, 4 x USART/UARTs, 1 x LPUART, 3 x SPIs, 1 x SAI, USB 2.0, IRTIM (infrared interface), USB Type-C |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 12 × 9 × 4 cm |
Overview
The WeAct Studio STM32G431CBU6 Core Demo Board, made by WeAct Studio, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- CPU: Arm® 32-bit Cortex®-M4 CPU with FPU (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Voltage Range (V): 1.71 to 3.6 (quoted range is usually line-of-sight; walls and interference shorten it)
- Flash Memory: 128 Kbytes (more memory leaves room for larger programs and buffers)
- SRAM: 22 Kbytes
- Communication Mode: 1 x FDCAN, 3 x I2C, 4 x USART/UARTs, 1 x LPUART, 3 x SPIs, 1 x SAI, USB 2.0, IRTIM (infrared interface), USB Type-C (confirm your cable or board uses the same connector)
- Shipping Weight: 0.04 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 12 × 9 × 4 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Arm® Cortex®-M4 CPU running at up to 170 MHz with FPU for enhanced mathematical processing.
- Up to 128 Kbytes of Flash memory with ECC support. 32 Kbytes of SRAM with hardware parity check, including CCM SRAM for routine boosting.
- Multiple 12-bit ADCs (4 Msps), DAC channels, comparators, and operational amplifiers for analog signal processing. Comprehensive set of timers including general-purpose, PWM, and motor control timers.
- Support for various communication protocols: FDCAN, USB 2.0, I2C, SPI, USART/UART, LPUART, and SAI (serial audio interface).
- Memory protection unit (MPU) and proprietary code readout protection (PCROP) for enhanced security. Support for readout protection and write protection of embedded Flash memory and SRAM.
- Wide operating voltage range (1.71 V to 3.6 V) and support for various low-power modes (sleep, stop, standby, shutdown). Independent power supply inputs for analog components (ADC, DAC, operational amplifiers).
Package Includes:
1 x WeAct Studio STM32G431CBU6 Core Demo BoardQuick specs
- CPU
- Arm® 32-bit Cortex®-M4 CPU with FPU
- Voltage Range (V)
- 1.71 to 3.6
- Flash Memory
- 128 Kbytes
- SRAM
- 22 Kbytes
- Communication Mode
- 1 x FDCAN, 3 x I2C, 4 x USART/UARTs, 1 x LPUART, 3 x SPIs, 1 x SAI, USB 2.0, IRTIM (infrared interface), USB Type-C
- Shipping Weight
- 0.04 kg



















