
1 / 3 · Click to enlarge
AI Summary
The WeMos TTGO Xi 8F328P-U is a compact development board compatible with Arduino Nano V3.0 and Pro Mini. Its built-in USB chip enables direct programming, and the 12-bit ADC with DAC adds precise analog capability.
Key Highlights
- TTGO Xi 8F328P-U chip at 16 MHz with 32 KB flash
- Onboard USB for direct programming without extra adapters
- 12-bit ADC and DAC for accurate analog input and output
- Wide 3.3 V to 5 V input voltage range
- 8 PWM channels for motor and LED control
- Compact 52 x 26 mm board weighing only 6 g
Ideal For
- Makers building compact Arduino-compatible projects
- Students learning embedded programming with the Arduino IDE
- Engineers needing precise analog input and output
- Hobbyists designing low-power sensor nodes
Buying Tip
Remember to install the LGT support package via the Arduino Board Manager before uploading your first sketch.
Elecvora expert review
Our verdict
The WeMos TTGO Xi 8F328P-U offers a practical upgrade over classic Arduino Nano boards with its 12-bit ADC, DAC, and onboard USB, all in a tiny package. It is a solid choice for analog-intensive projects where space is limited.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Onboard USB simplifies programming
- 12-bit ADC and DAC for precise analog control
- Compact and lightweight design
- Wide 3.3 V to 5 V input range
Cons
- Requires LGT support package installation
- Limited SRAM (2 KB) for complex sketches
Best for
Compact analog and sensor projects
Not ideal for
Projects requiring large memory or advanced connectivity
Specifications
| Item Type | Development Board |
|---|---|
| Chip Type | TTGO Xi 8F328P-U |
| Input Voltage (V) | 3.3 ~ 5 |
| Operating Frequency (MHz) | 16 |
| Flash Memory (Kbytes) | 32 |
| SRAM Memory (KB) | 2 |
| PWM | 8 |
| ADC / DAC | 12-bit |
| Length (mm) | 52 |
| Width (mm) | 26 |
| Weight (g) | 6 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 7 × 3 × 1 cm |
What's in the box
- 1 x Wemos TTGO Xi 8F328P-U Board
- 2 x Berg Pins
Frequently Asked Questions
Do I need to install special drivers?
Can I power it with 5 V?
What is the ADC resolution?
Does it have a DAC?
What comes in the package?
Is a USB cable included?
Overview
The WeMos TTGO Xi 8F328P-U is a small, lightweight development board built for compatibility with the Arduino Nano V3.0 and Pro Mini footprint. It is based on the TTGO Xi 8F328P-U chip and runs at 16 MHz, providing a familiar environment for users who develop with the Arduino IDE. The board includes an onboard USB chip, so you can connect it directly to a computer for program burning without needing a separate USB-to-serial adapter.
Key Features
- Direct USB programming: The integrated USB chip simplifies uploading sketches and powering the board during development.
- 12-bit ADC and DAC: The analog-to-digital converter offers finer resolution than typical 10-bit boards, and the built-in DAC enables true analog output.
- Internal calibrated reference: A 1.024 V, 2.048 V, or 4.096 V reference with 1% calibration helps maintain stable analog measurements.
- High-precision RC oscillator: Operates without an external crystal, keeping the circuit simple and reliable.
- Unique GUID: Each chip has a unique ID that can be used for program encryption or device identification.
Specifications Explained
16 MHz operating frequency provides a balance of speed and power efficiency for most control and sensor tasks. 32 KB flash gives ample room for sketches, while 2 KB SRAM handles runtime variables. The 8 PWM channels let you control LEDs, servos, or small motors. The 12-bit ADC reads analog sensors with 4096 steps, and the DAC outputs analog voltages for audio or waveform generation. The board accepts 3.3 V to 5 V, making it flexible for different power sources.
Compatibility and Requirements
The board is designed for use with the Arduino IDE. You will need to install the LGT support package, which can be added directly through the Arduino Board Manager. No external crystal or additional components are required for basic operation. The onboard USB chip means you only need a standard USB cable (not included) to connect to your computer.
Typical Uses
This board is well-suited for compact projects such as sensor nodes, analog data loggers, LED controllers, and educational prototypes. Its small size and low weight make it easy to embed in handheld devices or wearables. The 12-bit ADC and DAC are particularly useful for audio sampling, waveform generation, and precise sensor readings.
What's in the Box
- 1 x Wemos TTGO Xi 8F328P-U Board
- 2 x Berg Pins
Quick specs
- Item Type
- Development Board
- Chip Type
- TTGO Xi 8F328P-U
- Input Voltage (V)
- 3.3 ~ 5
- Operating Frequency (MHz)
- 16
- Flash Memory (Kbytes)
- 32
- SRAM Memory (KB)
- 2














