Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This wind speed and direction sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model no. / name Wind Speed Sensor; power consumption (w) Voltage MAX ≤ 0.3W.

Key Highlights

  • Water-resistant casing
  • Item Type: Sensor
  • Model No. / Name: Wind Speed Sensor
  • Power Consumption (W): Voltage MAX ≤ 0.3W

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor
Model No. / NameWind Speed Sensor
Power Consumption (W)Voltage MAX ≤ 0.3W
Signal Range4 to 20mA
Resolution0.1(m/s)
Measurement Range0-30m/s
System error±3%
Transmission Distance< 1000
Wind Speed70m/s
Length (mm)180
Weight (g)255
Operating Temperature (°C)-40 ~ +80
Shipping Weight0.8 kg
Shipping Dimensions24 × 22 × 20 cm

Overview

The Wind Speed Sensor Current Type(4 to 20mA) Anemometer Kit (Waterproof & Industrial) is listed in our wind speed and direction sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor
  • Model No. / Name: Wind Speed Sensor
  • Power Consumption (W): Voltage MAX ≤ 0.3W (match this to your power supply; too high a voltage can damage the part)
  • Signal Range: 4 to 20mA (quoted range is usually line-of-sight; walls and interference shorten it)
  • Resolution: 0.1(m/s)
  • Measurement Range: 0-30m/s (quoted range is usually line-of-sight; walls and interference shorten it)
  • System error: ±3%
  • Transmission Distance: < 1000

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Are you wandering to build a device that is used to detect the direction of air in the atmosphere and the pressure of air? So, here is the solution for you. you can buy this sensor from Elecvora.in at a reasonable price

The three Cups type Wind Speed Sensor Current Type(4 to 20mA) AnemometerKit is an instrument that can measure the wind speed. It is composed of a shell, the wind cup, and the circuit module. Photovoltaic modules, industrial microcomputer processors, the current generator, electric current, and so on are integrated into the internal drive.

The materials of sensor shell and back color coted wind Cups are of aluminum alloy which uses the special mold precision casting technology, the size of the tolerance is very small. The precision of the surface is very high, and the internal circuit has been protection processed, the sensor has high strength, weather resistance, corrosion resistance, and is waterproof.

The plug of the cable is a military plug, it has a good anticorrosive and prevents erosion performance that it can ensure the instrument used for a long time, at the same time, In the case of using relevant specifications that ensure the accuracy of the wind speed acquisition.

The material of the circuit PCB is the military-grade A which ensure the stability of the parameters and the quality of the electrical properties; Electronic components are all industrial chip which makes overall has extremely reliable electromagnetic interference resistance and can ensure that the host can work normally in - 20 ℃ ~ + 50 ℃, humidity 35% ~ 85% (condensation).

This product can be widely used in engineering machinery (crane, crawler crane, door crane, tower crane, etc.), railways, ports, docks, power plants, meteorological, cableway, the environment, greenhouse, breeding, air conditioning, energy monitoring, agriculture, health, clean room areas such as wind speed measurement, and the corresponding signal output.

Elecvora.in brings you the anemometer sensors, its wind speed was judged by adopting the output in varying current in the range of 4mA to 20mA, users can easily read the level of wind speed by our instruction and sample code.

Please make the external power (DC 12-24V) and the wiring to Arduino on the same ground, i.e. connect GND to Arduino as well as to external power's GND. In the diagram, it was not indicated out.

Note: This Anemometer produces the current output in the range of 4 to 20mA  We have another variant that produces voltage Output in the range of 0 to 5 V DC acc0rding to the speed of the wind. Click Here to see.  To Explore more Environmental sensors, Click here

Please make the external power (DC 9-24V) and the wiring to Arduino on the same ground, i.e. connect GND to Arduino as well as to external power's GND.
Sample Code:
/*
Connect the voltage signal wire to Arduino analog interface:
Yellow Cable<---->A0
*/

 void setup()
 {
   Serial.begin(9600);
 }

 void loop()
 {
   int sensorValue = analogRead(A0);
   float outvoltage = sensorValue * (5.0 / 1023.0);
   Serial.print("outvoltage = ");
   Serial.print(outvoltage);
   Serial.println("V");
   int Level = 6*outvoltage;//The level of wind speed is proportional to the output voltage.
   Serial.print("wind speed is ");
   Serial.print(Level);
   Serial.println(" level now");
   Serial.println();
   delay(500);
 }

Features :

  1. High hardness
  2. Corrosion protection
  3. Waterproofness
  4. High precision
  5. Dimensions:
    • Cups Outer Diameter: 50 mm.
    • Body Outer Diameter: 39 mm.
    • Base Diameter: 60 mm.
    • Screw Hole Diameter: 7 mm.

Package Includes :

1 x Wind Speed Sensor Voltage Type(0-5V) Anemometer. 1 x 3-Meter Connecting Cable with Crimped Connector. 1x Mounting Accessories set.

Quick specs

Item Type
Sensor
Model No. / Name
Wind Speed Sensor
Power Consumption (W)
Voltage MAX ≤ 0.3W
Signal Range
4 to 20mA
Resolution
0.1(m/s)
Measurement Range
0-30m/s
See all specifications