
1 / 3 · Click to enlarge
AI Summary
A compact 12V DC vacuum pump delivering about 1.5 L/min of flow with a vacuum of at least 300 mmHg. Its small 31 g body and low 230 mA current draw make it easy to fit into portable suction and sampling builds.
Key Highlights
- 12V DC operation with current draw of 230 mA or less
- Flow rate of about 1.5 litres per minute for small suction tasks
- Vacuum of at least 300 mmHg and pressure of at least 450 mmHg
- Quiet running at 55 dB or below
- Compact 60 x 35 mm body weighing only 31 g
- Rated life test of 400 hours for regular light-duty use
Ideal For
- Makers building compact suction or sampling devices
- Technicians servicing small environmental monitors
- Students and educators running bench experiments
- Electronics hobbyists working with 12V DC projects
- Designers needing a lightweight pump for portable equipment
Buying Tip
Confirm your 12V DC supply can provide at least 230 mA and plan your tubing size before ordering, since fittings are not included.
Elecvora expert review
Our verdict
A sensible small pump for low-demand suction tasks where size, weight and current draw matter more than raw power. It is best treated as a light-duty component rather than a continuous industrial pump.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very small and light at about 31 g
- Low current draw of 230 mA or less
- Quiet operation at 55 dB or below
- Useful vacuum and pressure ratings for its size
Cons
- Tubing and fittings are not included
- 400-hour rated life suits light-duty rather than heavy continuous use
- Requires a separate 12V DC supply
Best for
Compact suction, sampling and holding tasks in 12V DC projects
Not ideal for
High-flow or continuous industrial vacuum duty
Specifications
| Item Type | Vacuum Pump |
|---|---|
| Voltage Rating (V) | 12VDC |
| Flow Rate (L/Hr) | 90 |
| Pressure (mmHg) | ≥450 |
| Noise (dB) | ≤55 |
| Operating Current (mA) | ≤230 |
| Vacuum (mmHg) | ≥300 |
| Leakage (mmHg/min) | ≤50mm |
| Life Test(H) | 400 |
| Width (mm) | 35 |
| Length (mm) | 60 |
| Weight (g) | 31 |
| Shipping Weight | 0.032 kg |
| Shipping Dimensions | 6 × 4 × 2 cm |
What's in the box
- 1 x WPV15-12V DC 1.5L/min Mini Vacuum Pump
Frequently Asked Questions
What voltage does this pump need?
How much air can it move?
Does it come with tubing or fittings?
How noisy is it?
Can it run continuously?
How should I store and care for it?
Overview
The WPV15 is a miniature 12V DC vacuum pump designed for projects that need reliable suction in a very small package. It measures about 60 mm in length and 35 mm in width, and weighs roughly 31 g, so it can be mounted inside compact enclosures, handheld instruments or portable sampling devices. Because it runs on 12V DC and draws no more than 230 mA, it pairs well with small power supplies and battery packs used in electronics work.
Key Features
- 12V DC powered diaphragm-style vacuum pump
- Flow rate of approximately 1.5 litres per minute
- Vacuum of at least 300 mmHg and pressure of at least 450 mmHg
- Noise level of 55 dB or lower during operation
- Low operating current of 230 mA or less
- Leakage rate of 50 mmHg per minute or less
- Rated life test of 400 hours
Specifications Explained
Flow rate: the 1.5 L/min figure describes how much air the pump can move in a minute. This is a small-pump class, so it suits short suction holds and low-volume air movement rather than continuous high-demand work.
Vacuum and pressure: a vacuum of at least 300 mmHg means the pump can pull a useful negative pressure for holding parts, sampling air or drawing fluids through narrow tubing. The 450 mmHg pressure rating indicates the pump can also push air on the outlet side.
Current and voltage: at 12V DC and 230 mA or less, the pump stays within the limits of small adapters and modest battery packs. Check that your supply can deliver the required current before connecting it.
Noise: at 55 dB or lower, the pump is reasonably quiet for its size, which helps in bench and indoor use.
Leakage and life: a leakage figure of 50 mmHg per minute or less indicates how well the pump holds vacuum over time, while the 400-hour life test gives an idea of expected service life under normal light-duty operation.
Compatibility and Requirements
The pump requires a 12V DC power source capable of supplying up to about 230 mA. Tubing and fittings are not included, so match them to your own setup. No other accessories or controllers are supplied.
Typical Uses
- Air sampling in small environmental monitors
- Vacuum suction for holding lightweight parts during assembly
- Compact laboratory and classroom experiments
- Small pneumatic and fluid-handling projects
- Portable suction devices where space and weight matter
What's in the Box
1 x WPV15-12V DC 1.5L/min Mini Vacuum Pump.
Quick specs
- Item Type
- Vacuum Pump
- Voltage Rating (V)
- 12VDC
- Flow Rate (L/Hr)
- 90
- Pressure (mmHg)
- ≥450
- Noise (dB)
- ≤55
- Operating Current (mA)
- ≤230













