
1 / 5 · Click to enlarge
AI Summary
A compact pogo-pin expansion board that adds a full-size USB Type-A connector to a Raspberry Pi Zero, Zero W, or Zero WH. It lets you build a cable-free USB device setup for BadUSB, keyboard injection, and plug-and-play server projects.
Key Highlights
- Full-size USB Type-A connector for Raspberry Pi Zero boards
- Pogo-pin contact design needs no soldering or data cable
- Supports Raspberry Pi Zero, Zero W, and Zero WH
- Compact 40 x 20 mm board weighs about 25 g
- Enables BadUSB, keyboard injection, and USB device modes
- Useful for portable security testing and web server projects
Ideal For
- Raspberry Pi Zero owners building USB device projects
- Security researchers testing BadUSB and keyboard injection in a lab
- Makers creating a portable plug-and-play web server
- Students learning about USB device modes and network hijacking
- Hobbyists who want a solder-free USB adapter for a Pi Zero
Buying Tip
Confirm you already own a Raspberry Pi Zero, Zero W, or Zero WH, because the board itself is not included with this adapter.
Elecvora expert review
Our verdict
A focused, low-cost accessory that solves one problem well: giving a Pi Zero a proper USB Type-A connection without soldering. It suits hobbyists and lab testers who already understand the software side of USB device projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Solder-free pogo-pin mounting
- Full-size USB Type-A connector
- Compact and lightweight
- Supports Pi Zero, Zero W, and Zero WH
Cons
- Raspberry Pi board not included
- Software setup is not covered
- No package contents listed
Best for
Pi Zero owners building portable USB device projects
Not ideal for
Users who need a complete Raspberry Pi kit
Specifications
| Compatibility | Pi Zero |
|---|---|
| Length (mm) | 40 |
| Width (mm) | 20 |
| Weight (g) | 25 |
| Shipping Weight | 0.025 kg |
| Shipping Dimensions | 5 × 2 × 1 cm |
Frequently Asked Questions
Does this adapter include a Raspberry Pi board?
Which Raspberry Pi models are supported?
Do I need to solder the adapter to the Pi?
Do I need a USB data cable?
What can I use this adapter for?
What is included in the package?
Overview
The Zero-key USB Adapter is a small expansion board designed to give a Raspberry Pi Zero family board a standard USB Type-A port. Instead of a loose cable, it attaches to the Pi through pogo pins and presents a full-size USB connector, so the whole assembly stays compact and easy to carry.
It is a practical accessory for makers and security enthusiasts who want to experiment with USB device behaviour on a Pi Zero. Raspberry Pi boards are not included, so you will need a compatible board and your own software configuration.
Key Features
- Full-size USB Type-A output: connect the Pi Zero to a computer or other host with a standard USB port.
- Pogo-pin connection: the board contacts the Pi without soldering, keeping the setup quick to assemble.
- BadUSB and USB device support: suitable for projects involving keyboard injection, USB storage emulation, and network hijacking tests.
- Plug-and-play web server use: build a small portable web server setup that connects over USB.
- Compact footprint: about 40 mm long and 20 mm wide, with a weight of roughly 25 g.
Specifications Explained
The 40 mm by 20 mm board size keeps the adapter close to the Pi Zero footprint, so it does not add much bulk. At about 25 g, it is light enough to carry in a small project kit. The USB Type-A connector is the full-size rectangular port found on most computers, which means you can plug the assembly directly into a host without a separate adapter.
Compatibility is limited to the Raspberry Pi Zero family as listed. The pogo-pin design is intended for direct contact with the board, so no data cable is needed for the USB connection itself.
Compatibility and Requirements
This adapter is listed for Raspberry Pi Zero, Zero W, and Zero WH boards. A Raspberry Pi board is not included. You will need to prepare your own operating system and software for whichever USB mode or project you plan to use.
Typical Uses
- Building a portable BadUSB or keyboard injection test device
- Converting a Pi Zero into a USB mass storage device
- Running a small plug-and-play web server over USB
- Managing a Pi Zero directly from a computer over USB
- Learning about USB device modes and network hijacking concepts in a lab
What's in the Box
Package contents are not specified in the available product data. Please check the listing details before ordering.
Quick specs
- Compatibility
- Pi Zero
- Length (mm)
- 40
- Width (mm)
- 20
- Weight (g)
- 25
- Shipping Weight
- 0.025 kg
- Shipping Dimensions
- 5 × 2 × 1 cm













