Drivers and Interfaces IC
1,203 products
FiltersPopular

IRFZ44N Mosfet IC Dip-3 Pin Package
$5.99
Worldwide shipping

Microchip Technology
24LC128-I/SM-Microchip-EEPROM, 128 Kbit, 16K x 8bit, Serial I2C (2-Wire), 400 kHz, SOIJ, 8 Pins
$6.99
Worldwide shipping

Microchip Technology
MCP14700-E/SN-Microchip-MOSFET Driver IC, High Side And Low Side, 4.5V-5.5V Supply, 3.5A Out, 27ns Delay, SOIC-8
$7.99
Worldwide shipping

Microchip Technology
LAN8740A-EN-MICROCHIP-Ethernet Controller, Ethernet PHY Transceiver, IEEE 802.3, IEEE 802.3u, 1.14 V, 3.6 V, QFN
$7.99
Worldwide shipping

Microchip Technology
MCP2561FD-E/MF-MICROCHIP-CAN Interface, Transceiver, CAN FD Transceiver, 8 Mbps, 4.5 V, 5.5 V, DFN, 8 Pins
$7.99
Worldwide shipping

Microchip Technology
MCP7940N-I/P-MICROCHIP-Alarm RTC IC, Year/Month/Week/Date/Hr/Min/Sec 12Hr / 24Hr, I2C, 1.8 V to 5.5 V, DIP-8
$6.99
Worldwide shipping

Texas Instruments
MAX232ECDR-TEXAS INSTRUMENTS-Transceiver, RS232, 2 Drivers, 4.5 V to 5.5 V, SOIC-16
$6.99
Worldwide shipping

Microchip Technology
MIC4452YM-MICROCHIP-MOSFET Driver 2 outputs, Low Side, 4.5V-18V supply, 12A and 0.8 ohm output, SOIC-8
$7.99
Worldwide shipping
STMicroelectronics
ST232BTR-Stmicroelectronics-RS232 Transceiver, 2 Drivers, 2 Receivers, 4.5V to 5.5V Supply, TSSOP-16
$5.99
Worldwide shipping

Microchip Technology
MCP41050-I/P-Microchip-Volatile Digital Potentiometer, 50 kohm, Single, Serial, SPI, Linear, 2.7 V
$7.99
Worldwide shipping

Texas Instruments
LM3404MAX/NOPB-Texas Instruments-PWM Step-down 1 DC-DCVoltage Stabilizer 1.2A 6V~42V SOIC-8 LED Drivers ROHS
$7.99
Worldwide shipping

Texas Instruments
LP5562TME/NOPB-Texas Instruments-I2C 4 25.5mA 2.7V~5.5V DSBGA-12 LED Drivers ROHS
$8.99
Worldwide shipping

Texas Instruments
TL4242DRJR-Texas Instruments-PWM 1 WSON-8-EP(4x4) LED Drivers ROHS
$6.99
Worldwide shipping

Texas Instruments
TPS61500PWPR-Texas Instruments-200kHz~2.2MHz 1 boost converter 3A HTSSOP-14-EP LED Drivers ROHS
$6.99
Worldwide shipping

Texas Instruments
TPS92612QDBVRQ1-Texas Instruments-0V~40V PWM 1 150mA 4.5V~40V SOT-23-5 LED Drivers ROHS
$6.99
Worldwide shipping

Texas Instruments
DRV8428RTER-Texas Instruments-WQFN-16-EP(3x3) Stepper Motor Driver ROHS
$6.99
Worldwide shipping

STMicroelectronics
STCH03TR-Stmicroelectronics-PWM Controller, Current Mode, 11.5V to 23V Supply, 167kHz, 650V HV Start-Up Cell, SOIC
$6.99
Worldwide shipping

NEXPERIA
74HC4066BQ,115-Nexperia-4 142Ω SPST DHVQFN-14-EP(2.5x3) Analog Switches, Multiplexers ROHS
$5.99
Worldwide shipping

NEXPERIA
74LVC2G3157DPJ-Nexperia-2 10.4Ω SPDT TSSOP-10-3mm Analog Switches, Multiplexers ROHS
$6.99
Worldwide shipping

LM3915 LED Dot/Bar Display Driver IC DIP-18 Package
$6.99
Worldwide shipping

74HC541 Octal 3-State Buffer/Line Driver IC (74541 IC) DIP-20 Package
$5.99
Worldwide shipping

Texas Instruments
TPS26612DDFR-Texas Instruments--50V~50V TSOT-23-8 LED Drivers ROHS
$7.99
Worldwide shipping

Texas Instruments
SN65HVD1471D-TEXAS INSTRUMENTS-Transceiver RS485 Driver, 3V-3.6V supply, SOIC-8
$6.99
Worldwide shipping

Texas Instruments
SN75113N-Texas Instruments Inc-2/0 Driver 16-PDIP
$6.99
Worldwide shipping
About Drivers and Interfaces IC
Elecvora's Drivers and Interfaces IC range covers ready-made modules that add sensing, display, power or wireless functions to a project. There are 1,203 items here right now. Brands include Texas Instruments, STMicroelectronics, Microchip Technology and ANALOG DEVICES. Use the filters for price and brand, and open a product for full specifications and the package contents.
Buying Guide
- 1Match the module supply voltage and logic level to your board; many modules run at 3.3 V only.
- 2Check the interface (I2C, SPI, UART or analogue) and whether your board has a free port for it.
- 3Read the pin labels in the product photos so wiring matches the board you have.
- 4Order a spare for parts you will solder, test on a breadboard first, and keep an eye on maximum current ratings.
Frequently Asked Questions
Do these modules work with Arduino and ESP32?
Most do. Check the operating voltage and interface listed on each product: 5 V modules may need a level shifter when used with a 3.3 V board such as ESP32.
How do I choose the right drivers and interfaces ic?
Match the module supply voltage and logic level to your board; many modules run at 3.3 V only. Check the interface (I2C, SPI, UART or analogue) and whether your board has a free port for it.
Where can I see delivery times and returns?
Delivery times and return terms depend on your country. They are shown on each product page and explained in the Elecvora help centre.
Worldwide Shipping
Delivery shown at checkout
Buyer Protection
Help with every order
Quality Assured
Vetted products only
Secure Payment
Encrypted checkout







