
1 / 2 · Click to enlarge
At a glance
This drivers and interfaces ic is a good fit for everyday home and hobby use. Main specs: manufacturer Generic; supply voltage − 0.5 to +7; input clamping current ± 20 mA. Check that your power source supplies − 0.5 to +7 before connecting it.
Key Highlights
- Manufacturer: Generic
- Supply Voltage: − 0.5 to +7
- Input Clamping Current: ± 20 mA
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Manufacturer | Generic |
|---|---|
| Supply Voltage | − 0.5 to +7 |
| Input Clamping Current | ± 20 mA |
| Output Voltage | − 0.5to+ 0.5 |
| Output Current (A) | ±0.035 |
| Storage Temperature (°C) | −65 to +150 |
| Power Dissipation (mW) | 500 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Overview
The 74HC541 Octal 3-State Buffer/Line Driver IC (74541 IC) DIP-20 Package is listed in our drivers and interfaces ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Manufacturer: Generic
- Supply Voltage: − 0.5 to +7 (match this to your power supply; too high a voltage can damage the part)
- Input Clamping Current: ± 20 mA (your supply must deliver at least this much current)
- Output Voltage: − 0.5to+ 0.5 (match this to your power supply; too high a voltage can damage the part)
- Output Current (A): ±0.035 (your supply must deliver at least this much current)
- Storage Temperature (°C): −65 to +150 (space for firmware, files or media)
- Power Dissipation (mW): 500
- Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The 74HC541 is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Features
- Non-Inverting output
- Complies with JEDEC standard no. 7A
- Input levels: CMOS level
- For 74HCT541: TTL level ESD protection: HBM JESD22-A114F exceeds 2000 V and MM JESD22-A115-A exceeds 200 V
- Multiple package options
Note:
- Product Images are shown for illustrative purposes only and may differ from the actual product.
- For Technical Specifications about the IC go through the Datasheet in the Attachment section.
Package Includes:
1 x 74HC541 Octal 3-State Buffer/Line Driver IC (74541 IC) DIP-20 PackageQuick specs
- Manufacturer
- Generic
- Supply Voltage
- − 0.5 to +7
- Input Clamping Current
- ± 20 mA
- Output Voltage
- − 0.5to+ 0.5
- Output Current (A)
- ±0.035
- Storage Temperature (°C)
- −65 to +150













