
1 / 2 · Click to enlarge
At a glance
This adc & dac converter ic is a good fit for everyday home and hobby use. Main specs: manufacturer Generic; mounting type SMD/SMT; case/package SO PowerPad 8. Check that your power source supplies 5.5 V Min before connecting it.
Key Highlights
- Manufacturer: Generic
- Mounting Type: SMD/SMT
- Case/Package: SO PowerPad 8
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Manufacturer | Generic |
|---|---|
| Mounting Type | SMD/SMT |
| Case/Package | SO PowerPad 8 |
| Max. Operating Current (A) | 0.125 |
| No. of Outputs | 1 Output |
| Input Voltage | 5.5 V Min |
| Switching frequency | 500 kHz |
| Operating Temperature (°C) | - 40 to 125 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Overview
The TPS5430DDAR original IC SO-PowerPad-8 Step-Down Converter IC is listed in our adc & dac converter ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Manufacturer: Generic
- Mounting Type: SMD/SMT
- Case/Package: SO PowerPad 8
- Max. Operating Current (A): 0.125 (your supply must deliver at least this much current)
- No. of Outputs: 1 Output
- Input Voltage: 5.5 V Min (match this to your power supply; too high a voltage can damage the part)
- Switching frequency: 500 kHz (make sure the rest of your system works at this frequency)
- Operating Temperature (°C): - 40 to 125
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The TPS5430DDAR is a high-output-current PWM converter that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an Undervoltage lockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents, and a voltage feedforward circuit to improve the transient response. Using the ENA pin, the shutdown supply current is reduced to 18 μA typically. Other features include an active-high enable, overcurrent limiting, over-voltage protection, and thermal shutdown. To reduce design complexity and external component count, the
TPS543x feedback loop is internally compensated. The TPS5431 is intended to operate from power rails up to 23 V. The TPS5430 regulates a wide variety of power sources including 24 V bus. The TPS543x device is available in a thermally enhanced, easy-to-use 8-pin SOIC PowerPAD package. TI provides evaluation modules and the A designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
Features:
- Wide Input Voltage Range
- TPS5430: 5.5 V to 36 V
- TPS5431: 5.5 V to 23 V
- Up to 3-A Continuous (4-A Peak) Output Current
- High Efficiency up to 95% Enabled by 110-mΩ
- Integrated MOSFET Switch
- Wide Output Voltage Range: Adjustable Down to 1.22 V with 1.5% Initial Accuracy
- Internal Compensation Minimizes External Parts Count
- Fixed 500 kHz Switching Frequency for Small Filter Size
- Improved Line Regulation and Transient
- Response by Input Voltage Feed Forward
- System Protected by Overcurrent Limiting,
- Overvoltage Protection and Thermal Shutdown –40°C to 125°C Operating Junction Temperature Range
- Available in Small Thermally Enhanced 8-Pin SO PowerPAD Package
Package Includes:
1 x TPS5430DDAR original IC SO-PowerPad-8Quick specs
- Manufacturer
- Generic
- Mounting Type
- SMD/SMT
- Case/Package
- SO PowerPad 8
- Max. Operating Current (A)
- 0.125
- No. of Outputs
- 1 Output
- Input Voltage
- 5.5 V Min













