Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The LM741N is a general-purpose PDIP-8 operational amplifier with 1MHz GBP, 0.5V/us slew rate, and ±5V to ±18V dual-supply operation. Its 25mA output per channel and built-in overload protection make it a dependable choice for audio and signal-processing circuits.

Key Highlights

  • General-purpose bipolar op-amp in industry-standard PDIP-8 package
  • 1MHz gain-bandwidth product for audio and low-frequency signal work
  • 0.5V/us slew rate suits moderate-speed analogue designs
  • 25mA output current per channel drives light loads directly
  • Operates from ±5V to ±18V dual supplies for design flexibility
  • Input and output overload protection with no latch-up

Ideal For

  • Electronics students learning op-amp fundamentals
  • Hobbyists building audio preamps and active filters
  • Repair technicians replacing 709C or LM201 op-amps
  • Makers prototyping signal-conditioning circuits
  • Educators assembling classroom amplifier kits

Buying Tip

Check that your circuit uses a dual supply between ±5V and ±18V, and consider a DIP-8 socket for easy swapping during experiments.

Elecvora expert review

Our verdict

A dependable, widely understood op-amp that remains a sensible choice for learning, repair, and undemanding analogue designs. It is not a precision or high-speed part, but its robustness and compatibility make it a useful stock item.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Standard PDIP-8 package fits sockets and breadboards
  • Wide dual-supply range from ±5V to ±18V
  • Built-in input and output overload protection
  • Direct replacement for several legacy op-amps

Cons

  • Modest 1MHz GBP and 0.5V/us slew rate limit high-frequency use
  • 6mV input offset voltage is high for precision work
  • Requires a dual supply; not specified for single-supply operation

Best for

Students, hobbyists, and repair technicians working with audio and low-frequency analogue circuits.

Not ideal for

Precision instrumentation or high-speed signal processing where low offset and fast slew rates are required.

Specifications

Input Bias Current (Ib)0.5 uA, -
Output Current Per Channel25 mA
Gain Bandwidth Product (GBP)1MHz
Slew Rate (SR)0.5 V/us
Input Offset Voltage (Vos)6 mV
Amplifier TypeGeneral Purpose Amplifier
TechnologyBipolar
Max Dual Supply Voltage±18 V
Min Dual Supply Voltage (V)± 5
Voltage Gain (dB)106.02
CMRR (dB)70
Max. Operating Current (A)2.8
Dimensions (L x W x H) mm9.27 x 6.35 x 3.3
No. of Channels1
Operating Temperature (°C)0 to 70
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x LM741N PDIP-8 Operational Amplifier

Frequently Asked Questions

What supply voltage does the LM741N need?
It operates from a dual supply between ±5V and ±18V. Connect the positive rail to pin 7 and the negative rail to pin 4.
Can I use it as a direct replacement for an LM709 or LM201?
Yes, the LM741N is a direct, plug-in replacement for the 709C, LM201, MC1439, and 748 in most applications. Check your circuit for any special compensation requirements.
Does it come with a socket or other components?
No, the package includes only 1 x LM741N PDIP-8 operational amplifier. Sockets and passive components must be purchased separately.
What is the output current capability?
Each channel can deliver up to 25mA, which is enough to drive light loads such as LEDs or headphone-level audio.
Is it suitable for high-frequency circuits?
The 1MHz gain-bandwidth product and 0.5V/us slew rate make it best suited to audio and low-frequency applications, not high-speed designs.
How should I store and handle it?
Keep it in a static-safe bag or conductive foam and observe anti-static precautions when handling, as with any IC.

Overview

The LM741N is a single-channel, general-purpose operational amplifier built on bipolar technology and housed in a PDIP-8 package. It is designed as a direct, plug-in replacement for older op-amps such as the 709C, LM201, MC1439, and 748 in most applications, which makes it a convenient part for repair, upgrade, and educational work. The device offers a 1MHz gain-bandwidth product, a 0.5V/us slew rate, and a voltage gain of 106.02dB, giving it enough performance for a broad range of analogue signal tasks.

Key Features

  • Overload protection on both input and output
  • No latch-up when the common-mode range is exceeded
  • Stable operation without external compensation in most circuits
  • Single-channel amplifier in a through-hole PDIP-8 package
  • Wide dual-supply range from ±5V to ±18V

Specifications Explained

Gain-bandwidth product (GBP): At 1MHz, the LM741N can provide useful gain up to about 1MHz, making it suitable for audio, filters, and low-frequency instrumentation.

Slew rate: The 0.5V/us slew rate limits how fast the output can change, so it is best suited to signals below roughly 50kHz at full output swing.

Input offset voltage: A typical 6mV offset means the output may sit a few millivolts away from ideal when inputs are equal; this is acceptable for many non-precision applications.

Output current: Each channel can source or sink up to 25mA, enough to drive LEDs, small relays through a transistor, or light headphone loads.

Supply voltage: The amplifier runs from dual supplies between ±5V and ±18V, covering common ±12V and ±15V rails.

Common-mode rejection ratio (CMRR): At 70dB, the device rejects a good portion of common-mode noise, which helps in differential signal chains.

Operating temperature: Rated from 0°C to 70°C, it is intended for indoor and benign-environment electronics.

Compatibility and Requirements

The PDIP-8 footprint fits standard 8-pin DIP sockets and breadboards. It requires a dual power supply within ±5V to ±18V; no single-supply operation is specified in the data. External components such as resistors and capacitors are needed to set gain and frequency response. The part is a direct replacement for the 709C, LM201, MC1439, and 748 in most circuits.

Typical Uses

  • Audio preamplifiers and tone-control stages
  • Active filters and signal conditioning
  • Voltage followers and buffer circuits
  • Comparator and threshold detectors in non-critical designs
  • Educational and hobby projects

What's in the Box

1 x LM741N PDIP-8 Operational Amplifier.

Quick specs

Input Bias Current (Ib)
0.5 uA, -
Output Current Per Channel
25 mA
Gain Bandwidth Product (GBP)
1MHz
Slew Rate (SR)
0.5 V/us
Input Offset Voltage (Vos)
6 mV
Amplifier Type
General Purpose Amplifier
See all specifications