Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Texas Instruments, this clock & timing ic is a good fit for everyday home and hobby use. Main specs: manufacturer Texas Instruments; clock frequency 500kHz; min supply voltage 4.5V. Check that your power source supplies 4.5V before connecting it.

Key Highlights

  • Manufacturer: Texas Instruments
  • Clock Frequency: 500kHz
  • Min Supply Voltage: 4.5V

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerTexas Instruments
Clock Frequency500kHz
Min Supply Voltage4.5V
Max. Supply Voltage (V)16V
Case/PackageDIP
No. of Pins8
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The NE555P TEXAS INSTRUMENTS Timer, Single, Precision, 100 kHz, PDIP-8, made by Texas Instruments, is listed in our clock & timing ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Texas Instruments
  • Clock Frequency: 500kHz (make sure the rest of your system works at this frequency)
  • Min Supply Voltage: 4.5V (match this to your power supply; too high a voltage can damage the part)
  • Max. Supply Voltage (V): 16V (match this to your power supply; too high a voltage can damage the part)
  • Case/Package: DIP
  • No. of Pins: 8
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The NE555P are precision timing circuits capable of producing accurate time delays or oscillations. In the time-delay or monostable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the stable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor. The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low.

Features:

  1. Timing from microseconds to hours
  2. A stable or monostable operation
  3. Adjustable duty cycle
  4. TTL compatible output can sink or source up to 200mA

Package Includes:

1 x NE555P TEXAS INSTRUMENTS Timer, Single, Precision, 100 kHz, PDIP-8

Quick specs

Manufacturer
Texas Instruments
Clock Frequency
500kHz
Min Supply Voltage
4.5V
Max. Supply Voltage (V)
16V
Case/Package
DIP
No. of Pins
8
See all specifications