Drivers and Interfaces IC
1,203 products
FiltersPopular

NEXPERIA
PCF8578T/1,118-Nexperia-LCD Driver IC 56-BSOP
$7.99
Worldwide shipping

Texas Instruments (formerly Harris Corporation)
CD4054BE-Harris Corporation-Driver IC 4 Segment LCD Display 16-PDIP
$5.99
Worldwide shipping

ANALOG DEVICES
ADP3624ARDZ-RL-Analog Devices-Gate Driver, 2 Channels, Low Side, MOSFET, 8 Pins
$7.99
Worldwide shipping

NXP
TJA1050T/CM,118 NXP CAN Bus, Transceiver, 1 TX, 1 RX, 4.75 V, 5.25 V, SOIC
$6.99
Worldwide shipping
ANALOG DEVICES
ADP3654ARHZ-RL-Analog Devices-Gate Driver, 2 Channels, Low Side, MOSFET, 8 Pins
$7.99
Worldwide shipping

ANALOG DEVICES
AD5175BRMZ-10-RL7-Analog Devices-±15% I2C 10kΩ MSOP-10 Digital Potentiometers ROHS
$7.99
Worldwide shipping

STMicroelectronics
M24C01-RMN6TP-Stmicroelectronics-EEPROM, 1 Kbit, 128 x 8bit, Serial I2C (2-Wire), 400 kHz, SOIC, 8 Pins
$5.99
Worldwide shipping

STMicroelectronics
M24C08-FMH6TG-Stmicroelectronics-EEPROM, 8 Kbit, 1K x 8bit, Serial I2C (2-Wire), 400 kHz, DFN, 5 Pins
$5.99
Worldwide shipping

STMicroelectronics
M24M02-DRMN6TP-Stmicroelectronics-EEPROM, 2 Mbit, 256K x 8bit, Serial I2C (2-Wire), 1 MHz, SOIC, 8 Pins
$7.99
Worldwide shipping

STMicroelectronics
ULN2001D1013TR-Stmicroelectronics-DARLINGTON ARRAY, NPN, 50V, 0.5A, SOIC
$5.99
Worldwide shipping

STMicroelectronics
ULQ2003D1013TR-Stmicroelectronics-DARLINGTON ARRAY, NPN, 50V, 0.5A, SOIC
$5.99
Worldwide shipping

STMicroelectronics
ST75185CTR-Stmicroelectronics-RS232 Transceiver, 3 Drivers, 5 Receivers, 7.5V to 15V Supply, TSSOP-20
$5.99
Worldwide shipping

STMicroelectronics
ULN2801A-Stmicroelectronics-DARLINGTON ARRAY 8NPN, 2801, DIP18
$6.99
Worldwide shipping

STMicroelectronics
L78L05ABZ-AP-Stmicroelectronics-LINEAR VOLT REG, 5V, -40 TO 125DEGC
$5.99
Worldwide shipping

Texas Instruments
SN74LVC1G66DBVR-TEXAS INSTRUMENTS-IC, ANA SWITCH, SINGLE, SMD
$5.99
Worldwide shipping

ANALOG DEVICES
DS1050Z-001+-Analog Devices-Pulse Width Modulator, 5.5V-2.7V supply, 1 kHz, NSOIC-8
$8.99
Worldwide shipping

ANALOG DEVICES
MAX6665ASA55+-Analog Devices-Motor Driver/Fan Speed Controller, 2.7V to 5.5V, 26V/250mA/1 Output, Thermal Switch, HSOIC-8
$7.99
Worldwide shipping

ANALOG DEVICES
ADUM142E0BRWZ-Analog Devices-Digital Isolator, 4 Channels, 1.7 V, 5.5 V, WSOIC, 16 Pins, 150 Mbps
$8.99
Worldwide shipping

POWER INTEGRATIONS
LYT3324D-TL-Power Integrations-LED Driver, Buck-Boost, Flyback, 185-265VAC input, 1 Output, 124 kHz Switch. Frequency, SOIC-16
$7.99
Worldwide shipping

BL
BL8023DCB6TR-BL(Shanghai Belling)-Bi-Direction Relay Driver 300mA SOT-23-6
$5.99
Worldwide shipping

Microchip Technology
KSZ8721BL-MICROCHIP-Ethernet Controller, PHY Transceiver, IEEE 802.3u, 3.3 V, 4 V, LQFP, 48 Pins
$9.99
Worldwide shipping

XBLW
L9110H-XBLW-DIP-8 Stepper Motor Driver ROHS
$6.99
Worldwide shipping

XBLW
SN74HC245DTR-XBLW-6mA 2V~6V -20uA SOP-20 Buffers, Drivers, Receivers, Transceivers ROHS
$5.99
Worldwide shipping

STMicroelectronics
ST8034ATDT-Stmicroelectronics-Specialized Interface, Electronic Payments, Identification, Bank Card Readers, Pay TV, 2.7 V, 5.5 V
$6.99
Worldwide shipping
About Drivers and Interfaces IC
Elecvora's Drivers and Interfaces IC range covers ready-made modules that add sensing, display, power or wireless functions to a project. There are 1,203 items here right now. Brands include Texas Instruments, STMicroelectronics, Microchip Technology and ANALOG DEVICES. Use the filters for price and brand, and open a product for full specifications and the package contents.
Buying Guide
- 1Match the module supply voltage and logic level to your board; many modules run at 3.3 V only.
- 2Check the interface (I2C, SPI, UART or analogue) and whether your board has a free port for it.
- 3Read the pin labels in the product photos so wiring matches the board you have.
- 4Order a spare for parts you will solder, test on a breadboard first, and keep an eye on maximum current ratings.
Frequently Asked Questions
Do these modules work with Arduino and ESP32?
Most do. Check the operating voltage and interface listed on each product: 5 V modules may need a level shifter when used with a 3.3 V board such as ESP32.
How do I choose the right drivers and interfaces ic?
Match the module supply voltage and logic level to your board; many modules run at 3.3 V only. Check the interface (I2C, SPI, UART or analogue) and whether your board has a free port for it.
Where can I see delivery times and returns?
Delivery times and return terms depend on your country. They are shown on each product page and explained in the Elecvora help centre.
Worldwide Shipping
Delivery shown at checkout
Buyer Protection
Help with every order
Quality Assured
Vetted products only
Secure Payment
Encrypted checkout







