Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by NXP, this drivers and interfaces ic is a good fit for everyday home and hobby use. Main specs: manufacturer Philips Semiconductors (NXP); can interface ic type CAN Transceiver; ic interface type CAN. Check that your power source supplies 4.75-5.25V before connecting it.

Key Highlights

  • Manufacturer: Philips Semiconductors (NXP)
  • CAN Interface IC Type: CAN Transceiver
  • IC Interface Type: CAN

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerPhilips Semiconductors (NXP)
CAN Interface IC TypeCAN Transceiver
IC Interface TypeCAN
Data Transfer Rate1Mbaud
Supply Voltage4.75-5.25V
Case/PackageSOIC
No. of Pins8
No. of Channels1Channels
No. of Drivers1Drivers
No. of Receivers1Receivers
Operating Temperature (°C)-40°C
Operating Temperature Max150°C
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The TJA1050T/CM,118 NXP CAN Bus, Transceiver, 1 TX, 1 RX, 4.75 V, 5.25 V, SOIC, made by NXP, is listed in our drivers and interfaces ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Philips Semiconductors (NXP)
  • CAN Interface IC Type: CAN Transceiver (confirm your cable or board uses the same connector)
  • IC Interface Type: CAN (confirm your cable or board uses the same connector)
  • Data Transfer Rate: 1Mbaud
  • Supply Voltage: 4.75-5.25V (match this to your power supply; too high a voltage can damage the part)
  • Case/Package: SOIC
  • No. of Pins: 8
  • No. of Channels: 1Channels

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The TJA1050T/CM,118 is a CAN Transceiver, an interface between the controller area network (CAN) protocol controller and the physical bus. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller. It is the third Philips high-speed CAN transceiver after the PCA82C250 and the PCA82C251.

Features:

  1. Fully ISO 11898 Compliant
  2. High Speed (up to 1 Mbaud)
  3. Very Low Electromagnetic Emission (EME)
  4. Differential Receiver with Wide Common-mode Range for High Electromagnetic Immunity (EMI)
  5. An Unpowered Node Does Not Disturb Bus Lines
  6. Transmit Data (TXD) Dominant Time-out Function
  7. Silent Mode in which Transmitter is Disabled
  8. Bus Pins Protected Against Transients in an Automotive Environment
  9. Input Levels Compatible with 3.3 and 5V Devices
  10. Thermally Protected
  11. Short-circuit Proof to Battery and to Ground
  12. At Least 110 Nodes can be Connected

Package Includes:

1 x TJA1050T/CM,118 NXP CAN Bus, Transceiver, 1 TX, 1 RX, 4.75 V, 5.25 V, SOIC

Quick specs

Manufacturer
Philips Semiconductors (NXP)
CAN Interface IC Type
CAN Transceiver
IC Interface Type
CAN
Data Transfer Rate
1Mbaud
Supply Voltage
4.75-5.25V
Case/Package
SOIC
See all specifications