
1 / 3 · Click to enlarge
AI Summary
A compact two-wire DC voltmeter with a bright blue LED display that measures 3.5-30V and is self-powered from the circuit under test. Reverse polarity protection and automatic decimal placement make it easy to use in vehicles, DIY projects, and control panels.
Key Highlights
- Measures DC voltage from 3.5V to 30V with 0.1V accuracy
- Bright blue LED display with automatic decimal point placement
- Two-wire design draws power from the measured circuit
- Reverse polarity protection prevents damage from swapped wires
- Ultra-compact 30mm wide module weighs only 3 grams
- 200ms refresh rate for near-real-time readings
Ideal For
- DIY electronics enthusiasts building custom panels
- Motorcycle and car owners monitoring battery health
- RC and drone hobbyists checking LiPo voltages
- Technicians needing a compact voltage readout
- Solar power system users tracking battery status
Buying Tip
Remember that the voltmeter is self-powered from the measured circuit, so ensure the voltage source can supply the small 15mA current without affecting its operation.
Elecvora expert review
Our verdict
This voltmeter offers a simple, no-fuss solution for DC voltage monitoring in a tiny package. Its self-powered design and reverse polarity protection make it beginner-friendly, while the bright blue LED ensures readability.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very compact and lightweight
- No external power required
- Reverse polarity protected
- Automatic decimal point adjustment
- Bright and clear blue LED display
Cons
- Limited to 30V maximum, so not for higher voltages
- No enclosure or mounting hardware included
- Accuracy may vary slightly at extremes of range
Best for
DIY enthusiasts and vehicle owners needing a small, self-powered voltage display.
Not ideal for
Applications requiring high voltage measurement or AC voltage monitoring.
Specifications
| Model No. / Name | Voltmeter |
|---|---|
| Accuracy | 0.1 V |
| Wires | 2 |
| Display ON Voltage (V) | 2.5 |
| Measurement Range | 0 ~ 100V |
| Current consumption | 15 |
| Refresh Speed (ms) | 200 (one time) |
| Minimum Input (V) | 3.6 |
| Highest Input (V) | 28 |
| Operating Temperature (°C) | -10 to 60 |
| Mounting Hole PCD (mm) | 3 mm |
| Length (mm) | 9 |
| Width (mm) | 30 |
| Weight (g) | 3 |
| Color | Blue |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 5 × 3 × 3 cm |
What's in the box
- 1 x 0.28-inch 3.5-30V Two-Wire DC Voltmeter (Blue LED)
Frequently Asked Questions
What is the measurement range of this voltmeter?
Does this voltmeter need a separate power supply?
What happens if I connect the wires backwards?
What is included in the package?
How accurate is the voltmeter?
Can I use this voltmeter to measure AC voltage?
Overview
The Elecvora 0.28" Two-Wire DC Voltmeter is a miniature panel meter designed for quick and easy voltage monitoring. Its blue LED display is clearly visible, and the two-wire connection simplifies installation: simply connect the red wire to the positive terminal and the black wire to the negative terminal of the circuit you want to measure. No external power supply is required because the meter draws its operating current from the measured voltage. With a measurement range of 3.5V to 30V and 0.1V accuracy, it suits a wide variety of low-voltage DC applications.
Key Features
- Self-powered operation: Works directly from the measured circuit, eliminating the need for separate power wiring.
- Reverse polarity protection: The circuit is protected if the wires are connected incorrectly, preventing damage.
- Automatic decimal point: Displays two decimal places below 10V and one decimal place above 10V for optimal readability.
- Compact and lightweight: Measures only 30mm wide and weighs 3 grams, making it easy to fit into tight spaces.
- Fast refresh: Updates the reading every 200ms for responsive monitoring.
- Wide operating temperature: Functions reliably from -10°C to 60°C.
Specifications Explained
Measurement range (3.5-30V): The voltmeter can safely measure voltages within this range. It requires a minimum input of 3.6V to operate and should not exceed 28V for reliable long-term use; 30V is the absolute maximum. Always leave a margin to avoid damage from voltage spikes or ripple.
Accuracy (0.1V): Readings are precise to within 0.1V, suitable for battery monitoring and general voltage checks.
Current consumption (15mA): The meter draws very little current, minimizing impact on the circuit being measured.
Display ON voltage (2.5V): The display activates at 2.5V, but for accurate measurements, ensure the input is at least 3.6V.
Mounting hole PCD (3mm): A 3mm mounting hole allows secure installation with a screw or bolt.
Compatibility and Requirements
This voltmeter is compatible with DC voltage sources within the specified range. It does not require any additional power supply or driver circuitry. Simply connect the two wires to the source to be measured. The voltmeter is not suitable for AC voltage measurement. Ensure that the voltage being measured does not exceed 30V to prevent permanent damage.
Typical Uses
- Monitoring battery voltage in motorcycles, cars, and other vehicles
- Checking the status of storage batteries and solar power systems
- DIY electronics projects and custom control panels
- Voltage verification in RC models and drones
- Educational demonstrations and hobbyist experiments
What's in the Box
1 x 0.28-inch 3.5-30V Two-Wire DC Voltmeter (Blue LED)
Quick specs
- Model No. / Name
- Voltmeter
- Accuracy
- 0.1 V
- Wires
- 2
- Display ON Voltage (V)
- 2.5
- Measurement Range
- 0 ~ 100V
- Current consumption
- 15















