Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 0.3MP OV7670 CMOS camera module delivering 640 x 480 VGA images at up to 30fps over an SCCB interface compatible with I2C. Its low 2.5-3V operating voltage and roughly 60mW power draw make it a practical vision sensor for embedded and battery-powered projects.

Key Highlights

  • 0.3MP sensor with 640 x 480 VGA photosensitive array
  • Up to 30fps VGA frame rate for real-time capture
  • SCCB control interface compatible with I2C
  • Wide 67-degree field of view for general scene coverage
  • Low 2.5-3V operation at about 60mW at 15fps VGA YUV
  • Outputs YUV, YCbCr, RGB565/555/444 and raw RGB data

Ideal For

  • Makers building IoT camera nodes with microcontrollers
  • Students learning embedded image processing and sensor control
  • Hardware developers prototyping machine vision on a budget
  • Robotics hobbyists adding a low-power vision sensor
  • Educators running electronics and programming labs

Buying Tip

Check that your microcontroller board can supply a stable 2.5-3V rail and handle the 8-bit parallel output before ordering, since the module does not include a voltage regulator or level shifter.

Elecvora expert review

Our verdict

A dependable entry-level vision sensor for anyone who needs VGA colour imaging on a tight power and space budget. It rewards patience with firmware setup but delivers flexible, programmable image control once configured.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Genuine VGA 640 x 480 capture at up to 30fps
  • Broad output format support including YUV, RGB and raw RGB
  • Low 2.5-3V operation and small dormancy current
  • Extensive automatic and manual image controls via SCCB

Cons

  • Requires a parallel data interface, so wiring is more involved than a serial camera
  • No onboard regulator or level shifting, so host power must match 2.5-3V
  • 0.3MP resolution limits fine detail compared with higher-resolution sensors

Best for

Embedded vision prototyping and IoT camera builds on microcontrollers

Not ideal for

Applications needing high-resolution stills or plug-and-play USB video

Specifications

Item TypeCamera Module
Resolution0.3MP
Operating Voltage (V)2.5 to 3
Photosensitive array640 x 480
Optical Size1.6 inch
Angle (FOV)67 degrees
Maximum Frame Rate30fps VGA
Sensitivity (dBm)1.3V/(Lux-sec)
DormancyLess than 20A
Power Consumption (W)60mW/15fpsVGA YUV
Operating Temperature (°C)-30 ° C ~ 70 ° C
Pixel area3.6 x 3.6 μm
Signal to noise ratio (SNR)46 dB
Dynamic range52 dB
Shipping Weight0.04 kg
Shipping Dimensions7 × 4 × 2 cm

What's in the box

  • 1 x 0.3MP OV7670 Camera Module
  • 1 x SCCB (Serial Camera Control Bus) connector

Frequently Asked Questions

What resolution and frame rate does this camera support?
It uses a 640 x 480 photosensitive array and can output VGA frames at up to 30fps. Lower resolutions and sub-sampled modes are also available.
How do I connect it to my microcontroller?
The module uses an SCCB interface compatible with I2C for configuration and an 8-bit parallel bus for image data. Your controller needs enough GPIO pins for the data and sync lines plus a 2.5-3V supply.
What voltage does the module need?
It operates from 2.5 to 3V. Power consumption is about 60mW at 15fps VGA YUV, and dormancy current is under 20 microamps.
What is included in the package?
You receive one 0.3MP OV7670 camera module and one SCCB connector.
Which output formats are available?
The 8-bit output supports YUV/YCbCr 4:2:2, RGB565/555/444, GRB 4:2:2 and raw RGB data.
How should I care for the module?
Keep it within the -30 to 70 degrees Celsius operating range, avoid static discharge when handling, and protect the lens from dust and scratches.

Overview

The Generic OV7670 Camera Module is a single-chip VGA image sensor and processor in a small plastic and metal package. Its 0.3MP array captures 640 x 480 frames and can output them at up to 30fps, giving embedded projects a straightforward way to add colour vision without a large power or space budget.

All image controls are programmable through the SCCB (Serial Camera Control Bus) interface, which is compatible with I2C. That means exposure, gain, white balance, gamma, hue, saturation and sharpness can be tuned from firmware rather than fixed in hardware.

Key Features

  • VGA resolution: 640 x 480 photosensitive array with an optical size of 1.6 inch.
  • Flexible output formats: YUV/YCbCr 4:2:2, RGB565/555/444, GRB 4:2:2 and raw RGB data over an 8-bit output.
  • Automatic image control: automatic exposure, gain, white balance, band filter and black-level calibration.
  • Image quality tuning: colour saturation, hue, gamma, sharpness, anti-blooming, noise reduction and defect correction.
  • Low-light sensitivity: 1.3V/(Lux-sec) with a 46 dB signal-to-noise ratio and 52 dB dynamic range.
  • Power friendly: 2.5-3V operating voltage, about 60mW at 15fps VGA YUV, and under 20 microamps in dormancy.

Specifications Explained

The 640 x 480 array is the classic VGA size, which is enough for object detection, line following and simple recognition tasks while keeping data volumes manageable for small microcontrollers. A 30fps maximum frame rate at VGA supports smooth motion capture, and the sensor also offers sub-sampled and windowed modes for lower resolutions.

The 67-degree field of view behaves like a moderately wide standard lens, covering a room or workbench without heavy distortion. Pixel area of 3.6 x 3.6 micrometres and the stated sensitivity figure indicate how the sensor gathers light in dim conditions, while the 46 dB SNR and 52 dB dynamic range describe its ability to produce a clean image across bright and dark areas.

Operating temperature is rated from -30 to 70 degrees Celsius, so the module can be used in outdoor enclosures and cold or warm environments within that range. Flicker auto-detection at 50/60Hz helps avoid banding under mains lighting.

Compatibility and Requirements

The module needs a 2.5-3V supply and a host device that can drive the SCCB interface, which is compatible with I2C. Your controller must also be able to read the 8-bit parallel image output in one of the supported formats. Configuration is done through register writes, so plan for firmware or library support on your platform. A separate SCCB connector is included in the package.

Typical Uses

  • IoT camera nodes and connected monitoring devices
  • Educational and microcontroller vision projects
  • Toys and interactive gadgets
  • PC multimedia and USB capture builds
  • Small digital still camera experiments
  • Machine vision prototyping and image processing learning

What's in the Box

  • 1 x 0.3MP OV7670 Camera Module
  • 1 x SCCB (Serial Camera Control Bus) connector

Quick specs

Item Type
Camera Module
Resolution
0.3MP
Operating Voltage (V)
2.5 to 3
Photosensitive array
640 x 480
Optical Size
1.6 inch
Angle (FOV)
67 degrees
See all specifications

Explore more