Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 10-pack of 0.4mm stainless steel cleaning needles designed to clear clogs and residue from 0.4mm 3D printer nozzles. The sharp, smooth tip and rigid body let you clean the nozzle opening precisely without damaging it.

Key Highlights

  • Pack of 10 stainless steel cleaning needles
  • 0.4mm diameter matched to 0.4mm nozzles
  • Smooth, sharp tip for precise clog removal
  • Rigid needle body with high strength and toughness
  • Silver finish with a compact needle handle
  • Lightweight set at just 8g total

Ideal For

  • 3D printing hobbyists maintaining their own printers
  • Workshops running multiple 0.4mm nozzle machines
  • Makers who keep a printer maintenance kit on the bench
  • Users who want spare cleaning needles on hand

Buying Tip

Check that your printer uses a 0.4mm nozzle before ordering, because these needles are sized specifically for that diameter and the nozzle itself is not included.

Elecvora expert review

Our verdict

A straightforward maintenance set that gives you ten matched needles for 0.4mm nozzles at a low cost. It is the kind of small tool that saves a print session when a partial clog appears.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Ten needles in one pack for spares
  • Diameter matched to 0.4mm nozzles
  • Stainless steel body with a sharp, smooth tip
  • Compact and very light to store

Cons

  • Nozzle is not included
  • Only specified for 0.4mm nozzles
  • Manual tool with no additional accessories

Best for

Routine 0.4mm nozzle maintenance and clog clearing

Not ideal for

Printers with nozzle sizes other than 0.4mm

Specifications

Item Type3D Printer Accessories
Compatibility0.4mm nozzle
MaterialStainless Steel
Supported Nozzle Diameter (mm)0.4 mm
Weight (g)8
ColorSilver
Shipping Weight0.01 kg
Shipping Dimensions10 × 2 × 2 cm

What's in the box

  • 10 x 0.4mm stainless steel nozzle cleaning needles

Frequently Asked Questions

What are these needles used for?
They are cleaning needles for 3D printer nozzles. You insert one into a 0.4mm nozzle opening to help clear clogs and residue.
Will they fit my printer?
They are specified for 0.4mm nozzles. Check your nozzle diameter before ordering, because other sizes are not covered by the stated compatibility.
Do the needles need power or batteries?
No. They are manual hand tools with no electrical parts, so no power supply or battery is required.
Is a nozzle included in the pack?
No. The package contains ten cleaning needles only, and the nozzle must be purchased separately.
How should I store the needles?
Keep them in the pack or a small tool box away from moisture and loose debris. The set is compact and weighs about 8g, so it stores easily.
Can I use them on a hot nozzle?
Follow your printer manufacturer's safety guidance when working around a heated nozzle, and handle the needle carefully because the tip is sharp.

Overview

These stainless steel cleaning needles are a practical maintenance accessory for anyone running a 0.4mm nozzle on a 3D printer. Each needle measures 0.4mm across, matching the nozzle opening so you can work directly at the point where clogs and carbonised residue build up. The set contains ten needles, giving you spares for the workshop, the printer bench or a travel tool kit.

The needle tip is smooth and sharp, which helps you guide it into the nozzle bore with control. The body is built for strength and toughness, so it holds its shape while you apply light pressure. This is a simple hand tool: no power, no electronics and no setup beyond taking a needle from the pack.

Key Features

  • Matched 0.4mm diameter: sized for 0.4mm nozzles so the needle reaches the bore without forcing.
  • Stainless steel construction: a durable metal needle that resists corrosion during routine maintenance.
  • Sharp, smooth tip: helps you locate the nozzle opening and clear debris with precision.
  • Strong, tough body: the needle keeps its form under the light pressure needed for cleaning.
  • Ten-piece pack: keep spares at the printer, in a tool drawer or in a maintenance kit.
  • Compact and light: the whole set weighs around 8g, so it stores easily.

Specifications Explained

The headline specification is the 0.4mm diameter. It means the needle is intended for nozzles with the same opening size, letting you insert it into the bore to dislodge material. Using a needle that matches the nozzle reduces the risk of scraping the nozzle walls unnecessarily.

Stainless steel is the material used for the needle, chosen for its strength and resistance to rust. The silver colour is simply the natural finish of the metal. At roughly 8g for the set, the needles add almost nothing to a toolbox, and the shipping dimensions of 10 x 2 x 2 cm describe a small, easy-to-store package.

Compatibility and Requirements

These needles are specified for 0.4mm nozzles. They are a manual cleaning tool, so no power supply, firmware or software is involved. The nozzle itself is not included, so you will need an existing 0.4mm nozzle on your printer to use them. No other compatibility details are stated for this set.

Typical Uses

Use a needle when a print shows signs of partial blockage, such as uneven extrusion or a thin, curling filament path. The needle can also be used as part of routine maintenance to clear residue from the nozzle opening between prints. Keep one with your printer tools and store the rest as spares so a clog does not stop a print session.

What's in the Box

The pack contains ten 0.4mm stainless steel nozzle cleaning needles. The nozzle is not included and must be purchased separately.

Quick specs

Item Type
3D Printer Accessories
Compatibility
0.4mm nozzle
Material
Stainless Steel
Supported Nozzle Diameter (mm)
0.4 mm
Weight (g)
8
Color
Silver
See all specifications