Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact three-wire DC voltmeter with a bright blue 0.56-inch LED display, measuring 0 to 100VDC. It operates from a separate 4.5-30VDC supply and includes reverse polarity protection for safe, reliable voltage monitoring.

Key Highlights

  • Measures DC voltage from 0 to 100V with 1V accuracy
  • Bright blue 0.56-inch LED display for clear readings
  • Three-wire connection: separate power and measurement
  • Wide 4.5-30VDC operating supply range
  • Reverse polarity protection prevents circuit damage
  • Compact 48 x 16mm module with 200ms refresh rate

Ideal For

  • Automotive enthusiasts monitoring battery voltage
  • DIY electronics hobbyists building custom panels
  • Motorcycle owners checking charging system status
  • Makers needing a compact DC voltage display
  • Technicians testing DC power supplies

Buying Tip

Remember that the meter requires a separate 4.5-30VDC power supply and that the measurement ground must be common with the power ground when measuring a different source.

Elecvora expert review

Our verdict

A practical, low-cost voltage monitor that is easy to install and read, though its 1V accuracy and need for a separate supply limit it to general-purpose use.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Bright blue LED display is easy to read
  • Three-wire design allows separate power and measurement
  • Reverse polarity protection adds safety
  • Compact size fits small panels

Cons

  • Requires a separate 4.5-30VDC power source
  • Accuracy is only 1V, not for precision work
  • May exhibit a 1V drop at the meter itself

Best for

Automotive and DIY voltage monitoring where a clear, basic readout is needed

Not ideal for

Precision laboratory measurements or applications without an available power source

Specifications

Model No. / NameVoltmeter
Voltage Rating1 to 100VDC
Operating Voltage (VDC)4.5 ~ 30
Current consumption≤40
Display ON Voltage (V)3
ColorRed
Accuracy1V
Wires3
Cable Length20
Refresh Speed (ms)200 (one time)
Operating Temperature (°C)-10 to 60
Length (mm)48
Width (mm)16
Weight (g)13
Shipping Weight0.017 kg
Shipping Dimensions8 × 6 × 4 cm

Frequently Asked Questions

Can this voltmeter measure voltages above 100V?
No, the maximum measurable voltage is 100VDC. Exceeding this may damage the meter.
Does the voltmeter require a separate power supply?
Yes, it needs a 4.5 to 30VDC power supply to operate. The measured voltage can be the same source or a different one, provided the grounds are common.
What is the purpose of the third wire?
The third wire (yellow, white, or blue) connects to the positive terminal of the voltage you want to measure.
Is the display visible in bright light?
The blue LED display is bright and generally readable, but direct sunlight may reduce visibility.
What is included in the package?
Package contents are not specified. The voltmeter module with attached wires is supplied as a single unit.
Can I use this voltmeter to monitor a 12V battery?
Yes, it can measure 12V batteries as long as the power supply for the meter is within 4.5-30VDC and the measurement ground is common.

Overview

The Generic 0.56-inch 0-100V Three Wire LED Digital DC Voltmeter is a compact, panel-mount voltage monitor designed for straightforward DC voltage readings. Its bright blue LED display shows voltages from 0 to 100VDC with 1V accuracy, making it suitable for checking battery status or monitoring supply rails in vehicles and DIY electronics. The three-wire design allows the meter to be powered from a 4.5 to 30VDC source while measuring a separate voltage, giving flexibility in installation.

Key Features

  • Blue LED display: 0.56-inch digits are easy to read in most lighting conditions.
  • Three-wire connection: Red and black wires power the meter; the third wire connects to the measurement point.
  • Automatic decimal point: Displays two decimal places below 10V and one decimal place above 10V for better resolution.
  • Reverse polarity protection: Helps prevent damage if power wires are accidentally swapped.
  • Fast refresh: Updates the reading every 200ms for near-real-time monitoring.
  • Compact size: 48mm length and 16mm width fit small panels and tight spaces.

Specifications Explained

Voltage rating (1 to 100VDC): The meter can measure DC voltages across this range. Note that a 1V drop may occur at the meter itself, so consider this when interpreting readings.

Operating voltage (4.5 to 30VDC): This is the supply voltage required to power the meter's electronics. It is separate from the voltage being measured. Avoid running the supply near the 30V upper limit to prevent damage from voltage spikes or ripple.

Current consumption (≤40mA): The meter draws very little current, so it won't significantly load the power source.

Accuracy (1V): Readings are accurate to within 1V, suitable for general monitoring rather than precision lab work.

Refresh speed (200ms): The display updates five times per second, providing a stable, readable value.

Operating temperature (-10 to 60°C): Works in typical indoor and automotive environments.

Compatibility and Requirements

The voltmeter requires a DC power source between 4.5 and 30VDC to operate. The measurement input accepts 0 to 100VDC. For measuring a separate voltage, the negative poles of the power source and the measured source must be connected together (common ground). No other compatibility requirements are specified.

Typical Uses

  • Monitoring battery voltage in motorcycles, cars, and other vehicles.
  • Checking the status of storage batteries and DC power supplies.
  • DIY electronics projects requiring a compact digital voltage readout.
  • Panel-mounted voltage indication in custom enclosures.

What's in the Box

Package contents are not specified by the manufacturer. The voltmeter module is supplied as a single unit; connection wires are attached.

vm_2_wires5x-Mini-DC-0-30V-3-Wire-Voltmeter-Red-LED-_1

Quick specs

Model No. / Name
Voltmeter
Voltage Rating
1 to 100VDC
Operating Voltage (VDC)
4.5 ~ 30
Current consumption
≤40
Display ON Voltage (V)
3
Color
Red
See all specifications