Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 0.5mm pitch, 4 pin surface-mount FPC/FFC connector with a drawer-style actuator for quick cable insertion. Its compact footprint makes it useful for display and board-to-board links where space is limited.

Key Highlights

  • 0.5mm pitch with 4 contacts for fine-pitch flat cable termination
  • Drawer-lock actuator lifts for easy cable insertion and secure clamping
  • Surface-mount design suits space-constrained PCB layouts
  • Rated 50V and 0.5A for low-power signal connections
  • Phosphor bronze contacts and nylon 46 UL94-V0 housing
  • Operates from -25 to 85 degrees Celsius

Ideal For

  • Electronics designers working with fine-pitch flat cable
  • Repair technicians replacing display or board connectors
  • Makers building compact custom PCBs
  • Automotive and communications electronics assemblers
  • Medical and consumer device prototype builders

Buying Tip

Confirm that your flat cable has exactly 4 conductors at 0.5mm pitch and that your PCB footprint matches a 4 pin SMT drawer connector before ordering.

Elecvora expert review

Our verdict

A neat little connector for four-way flat cable links where board space is tight. The drawer actuator makes insertion easier than fixed-clamp types, though the fine pitch demands careful soldering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very small 7mm by 2mm footprint
  • Drawer actuator simplifies cable insertion
  • Flame-retardant nylon 46 housing
  • Phosphor bronze contacts with low contact resistance

Cons

  • Only 4 contacts, so limited to small signal groups
  • 0.5A rating restricts it to signal-level use
  • Requires reflow soldering and a matching footprint

Best for

Compact signal and display cable connections on dense PCBs

Not ideal for

Higher-current power wiring or hand-soldered breadboard builds

Specifications

ManufacturerGeneric
Pitch Spacing (mm)0.5
No. of Contacts/Pins4
Voltage(V)50
Operating Current (A)0.5
Mounting TypeSMD/SMT
MaterialMetal and plastic
Contact MaterialPhosphor Bronze
Insulation MaterialNylon 46 UL94-V0
ColorBlack, Beige
Contact Resistance (ohm)20MΩ (Max)
Insulation Resistance (MOhm)800
Operating Temperature (°C)-25 to 85
Length (mm)7
Width (mm)2
Weight (g)1 (approx) (each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 0.5mm Pitch 4 Pin FPC/FFC SMT Drawer Connector

Frequently Asked Questions

What cable does this connector accept?
It accepts a 4 conductor flat flexible cable or flexible printed circuit with 0.5mm pitch spacing between conductors.
How is the cable secured?
The drawer-style actuator lifts to open the contact row, then closes over the inserted cable to clamp it in place.
What are the voltage and current ratings?
The connector is rated for 50V and 0.5A, making it suitable for signal-level connections rather than power delivery.
Can I solder it by hand?
It is a surface-mount part, so reflow soldering onto a matching PCB footprint is the intended method; hand soldering at 0.5mm pitch is difficult.
What is included with the purchase?
One 0.5mm pitch 4 pin FPC/FFC SMT drawer connector is included.
What temperature range does it support?
It is specified for operation from -25 to 85 degrees Celsius.

Overview

This 0.5mm pitch 4 pin FPC/FFC connector is a surface-mount component for terminating flat flexible cables directly on a PCB. The drawer-style actuator lifts upward to open the contact row, the cable is inserted, and the actuator closes to clamp the conductors in place. That mechanism makes it easier to seat a cable in tight assemblies than fixed-pressure alternatives.

At roughly 7mm long and 2mm wide, the connector occupies very little board area, which helps when routing signals to displays or between closely spaced boards.

Key Features

  • Fine 0.5mm pitch: four contacts fit into a narrow footprint.
  • Drawer-lock actuator: opens and closes for straightforward cable insertion and retention.
  • Surface-mount termination: reflows onto pads for a low-profile board connection.
  • Phosphor bronze contacts: chosen for spring characteristics and corrosion resistance.
  • Nylon 46 UL94-V0 housing: flame-retardant insulation material.
  • Compact body: approximately 7mm by 2mm, about 1g each.

Specifications Explained

Pitch and contacts: the 0.5mm spacing between the four contacts determines the cable type you need; the mating FFC or FPC must match both the pitch and the four-way contact count.

Electrical ratings: a 50V maximum voltage and 0.5A operating current suit signal-level connections rather than power delivery. Contact resistance is listed at 20 milliohms maximum and insulation resistance at 800 megohms, indicating a low-resistance contact path and good isolation between conductors.

Thermal range: operation from -25 to 85 degrees Celsius covers typical indoor electronics and many enclosed automotive or industrial environments within that band.

Materials: phosphor bronze contacts pair with a nylon 46 UL94-V0 insulator, and the connector is supplied in black and beige colourways.

Compatibility and Requirements

The connector requires a PCB footprint designed for a 0.5mm pitch, 4 pin SMT FPC/FFC drawer connector. The cable must be a 4 conductor flat flexible cable or flexible printed circuit with 0.5mm conductor spacing. Because it is surface-mount, installation requires reflow soldering rather than hand wiring. Only the specifications listed here should be assumed; check your cable and board dimensions before ordering.

Typical Uses

Common applications include display and panel connections, board-to-board signal links, and compact consumer, communications, medical and automotive electronic assemblies where space and cable maneuverability matter.

What's in the Box

One 0.5mm pitch 4 pin FPC/FFC SMT drawer connector.

Quick specs

Manufacturer
Generic
Pitch Spacing (mm)
0.5
No. of Contacts/Pins
4
Voltage(V)
50
Operating Current (A)
0.5
Mounting Type
SMD/SMT
See all specifications