
1 / 4 · Click to enlarge
AI Summary
This 0.5mm pitch 6-pin FPC/FFC SMT drawer connector provides a secure, space-saving way to connect flexible cables to PCBs. Its flip-lock drawer actuator simplifies cable insertion and locking in tight assemblies.
Key Highlights
- 0.5mm pitch for high-density PCB layouts
- 6 contacts support low-power signal connections
- Drawer-style actuator simplifies cable insertion
- Surface mount design saves board space
- Phosphor bronze contacts for reliable conductivity
- Nylon 46 UL94-V0 housing for flame resistance
Ideal For
- Electronics designers working with flexible printed circuits
- Repair technicians replacing board-level connectors
- Automotive electronics installers
- Medical device manufacturers
- Consumer electronics hobbyists and makers
Buying Tip
Verify that your FFC/FPC cable has a 0.5mm pitch and 6 conductors, and that your PCB footprint matches the SMD pad layout before soldering.
Elecvora expert review
Our verdict
A practical choice for compact, low-power flexible cable connections where space is at a premium. The drawer mechanism simplifies assembly, though it requires careful handling during soldering and cable insertion.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very small footprint saves board space
- Drawer actuator makes cable insertion easy
- Good electrical ratings for signal-level applications
- Flame-retardant housing material
Cons
- Limited to 0.5A current, not for power
- Requires soldering and precise PCB alignment
- Actuator can be damaged if forced
Best for
Low-power signal connections in compact electronic assemblies
Not ideal for
High-current or high-voltage power applications
Specifications
| Manufacturer | Generic |
|---|---|
| Pitch Spacing (mm) | 0.5 |
| No. of Contacts/Pins | 6 |
| Voltage(V) | 50 |
| Operating Current (A) | 0.5 |
| Mounting Type | SMD/SMT |
| Material | Metal and plastic |
| Contact Material | Phosphor Bronze |
| Insulation Material | Nylon 46 UL94-V0 |
| Color | Black, Beige |
| Contact Resistance (ohm) | 20MΩ (Max) |
| Insulation Resistance (MOhm) | 800 |
| Operating Temperature (°C) | -25 to 85 |
| Length (mm) | 8 |
| Width (mm) | 2 |
| Weight (g) | 1 (approx) (each) |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 0.5mm Pitch 6 Pin FPC/FFC SMT Drawer Connector
Frequently Asked Questions
What type of cable does this connector accept?
Is this connector surface mount or through-hole?
What is the maximum voltage and current rating?
How do I insert and lock the cable?
What is included in the package?
What is the operating temperature range?
Overview
The 0.5mm Pitch 6 Pin FPC/FFC SMT Drawer Connector is a surface-mount component designed to terminate flexible flat cables (FFC) and flexible printed circuits (FPC) on printed circuit boards. Its drawer-type actuator lifts up to accept the cable and then presses down to secure it, making installation straightforward even in crowded enclosures. This connector is well suited to applications where space is limited and precise cable routing is required.
Key Features
- Compact footprint: 0.5mm pitch and 6 contacts in an 8mm x 2mm body.
- Drawer locking mechanism: Flip-lock actuator for easy cable insertion and retention.
- Surface mount (SMD/SMT): Solders directly to PCB pads for a low-profile connection.
- Durable materials: Phosphor bronze contacts and nylon 46 UL94-V0 insulation.
- Electrical ratings: 50V voltage, 0.5A current, 20MΩ maximum contact resistance, 800MΩ insulation resistance.
- Temperature range: Operates from -25°C to 85°C.
Specifications Explained
The 0.5mm pitch indicates the spacing between adjacent contacts, allowing a 6-pin connector to fit in a very small area. The 6 contacts are intended for low-power signals, not for high-current power lines. The 50V rating and 0.5A current capacity make this connector suitable for typical logic-level and low-voltage interfaces. Contact resistance of 20MΩ maximum ensures minimal signal loss, while 800MΩ insulation resistance helps prevent leakage between adjacent circuits. The phosphor bronze contacts offer good spring properties and corrosion resistance, and the nylon 46 housing meets UL94-V0 flammability standards. With an operating temperature range of -25°C to 85°C, the connector performs reliably in most indoor and protected environments.
Compatibility and Requirements
This connector is compatible with 0.5mm pitch FFC or FPC cables that have 6 conductors. It requires soldering to a PCB with matching SMD pads. No other accessories or tools are included. Ensure that the cable thickness and stiffener (if any) are appropriate for the drawer mechanism, as the connector is designed for standard FFC/FPC thicknesses.
Typical Uses
Common applications include connecting displays to controller boards, linking PCB modules in consumer electronics, automotive infotainment and sensor assemblies, medical monitoring devices, and communication equipment. The drawer actuator is especially helpful where space is tight and cables need to be inserted without lateral force.
What's in the Box
Package includes: 1 x 0.5mm Pitch 6 Pin FPC/FFC SMT Drawer Connector.
Quick specs
- Manufacturer
- Generic
- Pitch Spacing (mm)
- 0.5
- No. of Contacts/Pins
- 6
- Voltage(V)
- 50
- Operating Current (A)
- 0.5
- Mounting Type
- SMD/SMT













