Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 0307 through-hole inductor rated at 10uH with 10% tolerance and 0.37A current handling. Its epoxy-coated body and long bendable leads make it easy to fit into PCB repair and prototyping work.

Key Highlights

  • 10uH inductance with a 10% tolerance for predictable circuit behaviour
  • 0.37A current rating suits low-power filtering and tuning
  • 0307 case: 7mm length and 3mm body diameter
  • 560mOhm DC resistance at 20 degrees Celsius
  • Epoxy resin coating improves resistance to humidity
  • Through-hole leads can be bent for automatic PCB insertion

Ideal For

  • Hobbyists building breadboard and prototype circuits
  • Repair technicians replacing failed through-hole inductors
  • Design engineers needing a compact 10uH fixed inductor
  • Students learning filter and tuning circuits
  • Makers servicing radios, TVs and computer boards

Buying Tip

Check that your board has through-hole pads spaced for the 0307 body and that your circuit current stays below the 0.37A rating before ordering.

Elecvora expert review

Our verdict

A straightforward through-hole inductor that does one job well: providing a stable 10uH value in small, low-current circuits. It is a sensible spare to keep for repair and prototyping work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 0307 body fits tight layouts
  • Epoxy coating adds humidity resistance
  • Long leads are easy to bend and insert
  • Clear 10uH value with 10% tolerance

Cons

  • Current rating of 0.37A limits it to low-power paths
  • Only one inductor is supplied per order
  • Color ring markings must be read carefully to confirm value

Best for

Repair and prototyping of small through-hole circuits

Not ideal for

High-current power paths above 0.37A

Specifications

ManufacturerGeneric
Inductance10uH
Tolerance (%)10
Mounting TypeThrough Hole
Current Rating (A)0.37
Frequency (Hz)7.96M
Operating Temperature (°C)-40 to 85
Length (mm)7
Width (mm)3 (Body Diameter)
Weight (g)5
Case/Package:0307
DC Resistance(mΩ) at 20°C560
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 0307 10uH 0.25W Color Ring DIP Inductor

Frequently Asked Questions

What is the inductance of this inductor?
It is a 10uH fixed-value inductor with a 10% tolerance.
How much current can it handle?
The current rating is 0.37A, so keep circuit current below this figure.
Is it through-hole or surface mount?
It is a through-hole part in a 0307 case, so it needs a PCB or breadboard with matching holes.
What is included in the package?
The package contains one 0307 10uH color ring DIP inductor.
What temperature range does it support?
It is rated to operate from -40 to 85 degrees Celsius.
What is the self-resonant frequency?
The self-resonant frequency is 7.96MHz, so plan use below that point.

Overview

The Generic 0307 color ring DIP inductor is a small fixed-value component built for through-hole mounting. It carries a 10uH inductance with a 10% tolerance, so it behaves consistently in circuits where a defined value matters. The 0307 case is only 7mm long with a 3mm body diameter, which helps it sit close to other parts on a crowded board.

Each inductor is coated in epoxy resin, a finish that helps it cope with humid conditions and supports a longer service life. The leads are relatively long, giving you room to bend them for automatic insertion or to fit different PCB hole spacings.

Key Features

  • Fixed 10uH value: a defined inductance for filtering, tuning and matching work.
  • 10% tolerance: keeps part-to-part variation within a practical window.
  • 0.37A current rating: suitable for low-power signal and supply paths.
  • 560mOhm DC resistance: measured at 20 degrees Celsius for low losses in small circuits.
  • 7.96MHz self-resonant frequency: supports use at higher frequencies.
  • Epoxy resin coating: adds humidity resistance and mechanical protection.

Specifications Explained

Inductance and tolerance describe how much energy the part stores and how far a unit may drift from 10uH. A 10% window is normal for color ring inductors and is fine for most repair and prototype work.

Current rating is the 0.37A figure; keep your circuit current below this to avoid overheating. DC resistance of 560mOhm at 20 degrees Celsius tells you the copper loss you can expect at DC.

Self-resonant frequency of 7.96MHz is the point where the part stops behaving as a pure inductor, so plan usage below this value. The operating temperature range of -40 to 85 degrees Celsius covers typical indoor electronics environments.

Compatibility and Requirements

This is a through-hole part, so it needs a PCB or breadboard with matching holes and a soldering iron to fit it. The 0307 body and 7mm length suit standard board layouts. No other accessories are required to mount it.

Typical Uses

Color ring inductors like this one appear in radios, TVs, VCRs, computer devices, communication equipment and general electronic products. They are also handy for repair work, breadboard experiments and small filter or tuning stages.

What's in the Box

One 0307 10uH 0.25W color ring DIP inductor.

Quick specs

Manufacturer
Generic
Inductance
10uH
Tolerance (%)
10
Mounting Type
Through Hole
Current Rating (A)
0.37
Frequency (Hz)
7.96M
See all specifications